Kmart 42980773 Boxing Kit with Stand Promotions Installation Guide
- June 6, 2024
- Kmart
Table of Contents
Assembly Instructions
CARE INSTRUCTIONS:
WIPE CLEAN WITH A SOFT DAMP CLOTH. DO NOT USE SCOURERS, ABRASIVES OR CHEMICAL SOLVENTS TO CLEAN THE EQUIPMENT. CHECK AND TIGHTEN ALL PARTS REGULARLY. REPLACE ANY DAMAGED PARTS IMMEDIATELY. STORE IN A DRY PLACE AND KEEP AWAY FROM SUNLIGHT. FOR INDOOR AND DOMESTIC USE ONLY.
WARNING:
ADULT ASSEMBLY REQUIRED. THIS EQUIPMENT MUST BE USED ON A LEVEL AND STABLE
GROUND. DO NOT USE THE EQUIPMENT AS A STEP LADDER. DO NOT USE THE EQUIPMENT
UNLESS ALL BOLTS AND SCREWS ARE FIRMLY SECURED. CHECK AND TIGHTEN ALL PARTS
REGULARLY. DO NOT DRAG THIS EQUIPMENT. THIS PACKAGE CONTAINS SMALL PARTS.
KEEP CHILDREN AWAY WHEN ASSEMBLING. KEEP UNSUPERVISED CHILDREN AWAY FROM THE
EQUIPMENT. INJURIES MAY RESULT FROM INCORRECT OR EXCESSIVE TRAINING.
IMMEDIATELY STOP THE EXERCISING, IF YOU FEEL SICK OR FEEL ANY DISCOMFORT
DURING USE,IF ANY ABNORMAL SOUNDS ARE HEARD YOU SHOULD CEASE USING THE
EQUIPMENT UNTIL ITS RESOLVED. THE SAFETY LEVEL OF THE EQUIPMENT CAN BE
MAINTAINED ONLY IF IT IS EXAMINED REGULARLY FOR DAMAGED PARTS AND WEAR AND
TEAR. USE AGE:14+. MAXIMUM USE WEIGHT FOR BOXING BAG: 60KG. PRODUCT WEIGHT:
25.30KG.FAILURE TO FOLLOW THESE WARNINGS COULD RESULT IN SERIOUS INJURY.
FOR AU / NZ: IMPORTED FOR KMART AUSTRALIA LIMITED. STORE IN AUSTRALIA AND
NEW ZEALAND. LEVEL 4/690 SPRINGVALE ROAD, MULGRAVE VICTORIA AUSTRALIA 3170
Step 1: Fix part 10 on part 1 & 2 with screws 16, 18 & 20 (as below per diagram).
Step 2: Fix tube 2 & 3 into tube 1 with screws 16, 17, 20 & 24 (as below diagram).
Step 3: Do not tighten all the screws until the assembly is complete.
a. Fix part 13 on part 14 with screws 21, 22 & 23. Connect this part to tube
7 with screws 16, 20 & 24(as below diagram).
b. Insert tube 7 into tube 6 and use part 15 to fix and adjust the height of
part 7.
c. Fix part 26 with screws 20 & 27.
d. Connecting tube 3, tube 6 & part 12 with screws 12, 16, 18 & 20(as below
diagram).
Step 4:
a. Connecting tube 8, 9 & 11 to tube 4 & 5 with screws 16, 18 & 20.
b. Connecting tube 4 & 5 with tube 2 with screws 16, 19 & 20, fix tube 8
& 9 to tube 6 with screws 16, 18 & 20.
c. Using screws 16, 20 & 25 to hanging the speed ball, hanging the boxing ball
on part 26.
WARNING:
- ALL THE SCREWS MUST BE SECURED BEFORE USE!
- IT IS NECESSARY TO ENSURE A FREE-MOVING AREA WITH A DIAMETER OF 1 METER.
WARNING:
- Need to add load weights (not included) in the specified position when using this equipment.
- Load weights (not included) in the specified position when using this equipment.
- Max loading weight of the boxing bag is 60kg.
- boxing gloves not included.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>