Kmart 42994800 Chin Up Station Instruction Manual
- June 6, 2024
- Kmart
Table of Contents
CHIN UP STATION
KC: 42994800
WARNING! READ ALL INSTRUCTIONS CAREFULLY BEFORE USING THIS PRODUCT. FAILURE OR INCORRECT OR EXCESSIVE TRAINING MAY CAUSE INJURIES.
Safety Information
Please read this manual carefully before using it and make sure that you read the information supplied before commencing any exercise with this equipment.
- Please consult a doctor before commencing any exercise with this equipment and if you develop any uncommon symptoms during use you should seek further medical advice.
- The equipment must be placed on a hard, flat surface, cover the floor with carpet to prevent damage to the ground.
- Periodically check all the parts for signs of wear or damage. If you find defective parts, stop use immediately, make sure all problems are solved prior to continuing to use.
- While using, please wear suitable clothes and closed-toe shoes for training to avoid anything getting caught in the equipment.
- Check all parts first before doing exercises. Tighten all the bolts and nuts on a regular basis and never operate the equipment if it is not functioning properly.
- You can mount and dismount on the equipment safely from the step by holding onto the handle of the parallel bars.
- Keep children away from the equipment unless they are supervised by an adult.
- Create a realistic training plan before use, and use this product according to the instructions of use in this instruction manual.
- The product is in compliance with EN 20957-1 CLASS HC. Suitable for domestic home use only.
Warning！please keep a safety distance of 0.6m around the training area during exercise.
Technical Parameters
| Overall size | 150 x 106 x 212cm | Maximum user weight | 100kg |
|---|---|---|---|
| Product total surface | 1.59m2 | Product total weight | 28.3kg |
Hardware list
Parts list
Assembly Instructions
Note: To assemble easily and successfully, please keep the bolts at 70%
of tightness while installing the parts, then fasten all the bolts and nuts
fully with a wrench (Hardware J) after fully assembled.
Step 1. Connect the left & right base (Part L, M ) and connection tube
(Part N) together, and secure them with bolts, washers, and nuts (Hardware B,
D,E)
Step
2. Insert 2pcs low poles (Part O) to the part of step 1, then secure them
with bolts, washers, and nuts (Hardware B, D,E).}
Step
3. Connect the connection tube (Part N) and the part of step 2 together,
secure them with bolts, washer and nuts (Hardware B,D,E).
Step 4. Connect the 2pcs strengthen poles (Part P) and the part of step 3
together, secure them with bolts, washers, and nuts (Hardware B, D, E).
Step
6. Connect the connection tube (Part R) with the part of step 5 together,
then secure with bolts, washers, and nuts (Hardware B, D, E).
Step 7. Connect right & left overarm tube (Part S & T) with the part of
step 6 together, then secure them with bolts, washers, and nuts (Hardware A,
D,E).
Step
8. Insert the hang-up bar (Part U) into the tube of the upper pole and
ensure the holes are kept in line with each other, then secure them with
bolts, washers and nuts (Hardware C, D, E). Place 2pcs plastic cover
(Hardware K) at the end of the tube after assembling the hang up bar.
Step
9. Connect the back foam (Part V) and armrest foam (Part W) with the part of
step 8 together, then secure them with bolts and washers (Hardware F, G, H).
Then the product is assembled completely.
Exercise Instructions
A successful exercise program consists of a warm-up, aerobic exercise, and a
cool-down. Do the entire program at least two and preferably three times a
week, resting for a day between workouts. After several months, you can
increase your workout to four or five times per week. Warming up is an
important part of your workout and should begin every session. It prepares
your body for more strenuous exercise by heating up and stretching out your
muscles, increasing your circulation and heart rate, and delivering more
oxygen to your muscles. At the end of your workout, repeat these exercises to
reduce muscle soreness.
Please reference the below images to do the exercise according to your
request.
Care & Maintenance Instructions
- Proper use of the equipment can increase its service life.
- Screws will get loose after exercise, so please check and tighten the screws properly every week so as to avoid any possible damage to the equipment or personal injury.
- Special pay attention to the armrest foam which is the most susceptible to wear and tear.
- Wipe clean with a damp cloth. Do not use abrasive cleaning materials or solvents.
- Keep this equipment safely away from children when not in use.
- Always store the equipment on a flat surface and in a dry and well-ventilated area.
©KMART AUSTRALIA LIMITED
KMART AUSTRALIA – 690 SPRINGVALE ROAD, MULGRAVE, VIC 3170 AUSTRALIA.
KMART NEW ZEALAND – REGIONAL OFFICE C/O KMART PAPATOETOE STORE.
HUNTERS PLAZA, GREAT SOUTH ROAD, PAPATOETOE, AUCKLAND, NEW ZEALAND.
Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>