AZZA ZIRCON 7000 TG Full Tower User Manual
- June 6, 2024
- AZZA
Table of Contents
AZZA ZIRCON 7000 TG Full Tower
Specifications
Model
Model Name:| ZIRCON 7000
Model Number:| CSAZ-7000
Specifications
Type:| ATX Full Tower
Color:| Black/Black(interior), White/White(interior)
Side Panel Window:| Tempered glass on both sides
Max CPU Cooler Height:| UP to 165mm
Max Video Card Length:| Up to 390mm long video card (Horizontal/ Vertical)
Power Supply:| Not included
Motherboard Compatibility:| E-ATX(<270mm)、ATX、Micro ATX
Expansion
External 5.25″ Drive Bays:| 0
Internal 2.5″ Drive Bays:| Up to 5
Internal 3.5″ Drive Bays:| Up to 5
Expansion Slots:| 8(Horizontal)+2(Vertical)
Top Ports:| Power button, reset button, HD Audio, USB 3.0 x 2,Type C
Physical Specifications|
Case Dimensions (HxWxD):| 515 x 233 x 515mm / 20.3 x 9.2 x 20.3 inches
Weight:| 14.9kg /32.8lbs
Features
Tempered Glass Sides Window:| High-quality tempered glass side window allows
for clear visuals to inner components
Addressable RGB Light Effects:| Addressable RGB light I/O ports and strip on
the front panel. All Addressable RGB light devices sync with the motherboard,
allowing the motherboard software to directly control the lighting.
Available Fan Ports:| 3x120mm or 2x140mm Fan ports in the front 3x120mm or
2x140mm Fan ports on the top 1x120mm Fan port in the rear (Included fan: Front
– 1 x Black fan ; Rear – 1 x Black fan)
Water Cooling:| Supports radiators up to 280/360mm in the Front Supports
radiators up to 280/360mm on the Top
Dust Filters:| Removable (magnetic) dustproof net on the top and front, slide-
out dust filter on the bottom of chassis.
Power Supply Support:| Bottom mounted ATX Power Supply
Others Features:| Cable management bar on both sides.
Can adjust the video card holder to fit your system needs.
Pump bracket included, compatible with a 2.5″ SSD, or a 3.5″ HDD.
Chassis Parts
| 1 | Iron front panel |
|---|---|
| 2 | LED lens |
| 3 | The back panel of the front |
| 4 | Left side tempered glass panel |
| 5 | Right side tempered glass panel |
| 6 | Cable management cover |
| 7 | Adjustable video card holder |
| 8 | Cable management bar |
| 9 | Pump bracket |
| --- | --- |
| 10 | 3.5″HDD/2.5″ SDD brackets x2 |
| 11 | 3.5″HDD/2.5″ SDD spring bolt tray x2 |
| 12 | Removable magnetic dustproof net |
| 13 | Slide-out dust filter |
| 14 | Black fan x2 |
| 15 | Screws for iron front panel x2 |
| 16 | Screws for iron top panel x2 |
| 17 | Iron top panel |
Control Panel Functions
Installation
Removing the side panel
Removing the bottom dust filter
Adjusting the video card holder
Step: 1
Step: 2
3.5″ HDD /2.5″ SSD Installation
E-ATX(<270mm) motherboard Installation
Cooling System Installation
Parallel Connection (“daisy-chaining”)
CAUTION
The addressable RGB fan has a 3-pin connector (4 holes). Please ensure that
you are connecting the 3-pin connector on the fan to the 3-pin RGB header on
the motherboard or RF Remote connector. Do not plug it into the 4-pin header,
as the incompatible voltage will fry the fan. The 3-pin connector on the fan
still has 4 holes, but the 4th hole is intentionally blocked for this reason,
so please do not try to force it.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>