AZZA STORM 6000 User Manual
- June 6, 2024
- AZZA
Table of Contents
STORM 6000
User Manual
www.azzatek.com
Specifications
Model
Model Name| Storm 6000-RGB
Mod& Number| CSAZ-6000RGB/VV/B
Spec
Type| ATX Full Tower
Side Panel| Tempered glass side panel with EVA Anti Vibration Pad
Max CPU Cooler Height| Up to 175mm
Max VGA Card Length| Up to 420mm
Water cooling radiator| Front: up to 280mm; Top: up to 360mm
Motherboard Compatibility| E-ATX(<272mm), ATX, Micro ATX
Power Supply Locations| Rear Bottom
RGB light effects| External switch for RGB controller
120mm AZZA HURRICANE RGB LITE fan x4
External 5.25″ Drive Bays| 1
Internal 2.5″ Drive Bays| Up to 6
Internal 3.5″ Drive Bays| Up to 4
Expansion slots| 10
Front Ports| 2 x USB 3.0, 2 x USB 2.0, HD Audio, Mic.
Cooling System (installed)| 2x120mm AZZA HURRICANE RGB LITE fan in front;
2x120mm AZZA HURRICANE RGB LITE fan on top; 1x120mm black fan in the rear
Available Fan Ports
Front| 2x120mm or 2x140mm
Top| 3x120mm or 2x140mm
Rear| 1x120mm or 1x140mm
Physical Specs
Dimensions (HxWxD)| 537.7x225x525mm / 21.17×8.86×20.67(inch)
Weight| 11.1 Kg (24.4Ibs)
Carton Size (HxWxD)| 640x335x646mm / 25.2×13.19×25.43(inch)
Chassis Parts
1 | Front bezel |
---|---|
2 | RGB control PCB |
3 | 5.25″ Device cover X1 |
4 | Door |
5 | Power switch |
6 | Acrylic cover |
7 | Top cover |
5 | USB & Audio port |
9 | LED lens |
10 | HDD/SSD tray |
11 | Dust filter |
12 | Stand X2 |
13 | Tempered Glass Side Panel |
14 | PCI slot cover |
15 | Right side panel |
16 | RGB fan X4 |
17 | 120mm black fan X1 |
Control panel functions
PSU Installation
ODD Installation
ODD Cage Removal
Colling System Installation
3.5″/2.55″ HDD Installation
- Supports video cards up to 420mm in length.
- Supports PSUs up to 250mm in length.
- Four multifunctional brackets support 3.5″ HDD or 2.5″ SSD. (ABCD)
- Two brackets support 2.5″ Devices. (COG)
HURRICANE RGB LITE fan
Patented Design
VORTEX AIR (Patented)
To help improve cooling performance, our patented Shark Teeth design helps
channel the air into a concentrated stream for more powerful airflow.
SILENCE (Patented)
Special grooves carved into the fan blades help reduce noise levels up to ten
percent! SYNC RGB (Patented) By plugging the Hurricane RGB fan into an RGB-
compatible motherboard, lighting and fan speed can be controlled directly
without the need for additional hardware.
CYLINDRICAL LIGHTNING (Patented)
More light is better. With a frame made of acrylic material, the RGB
lighting is spread all throughout the fan’s frame, giving a clean, uniform
look.
Model Name | HURRICANE RGB LITE |
---|---|
Model Number | FNAZ-12RGB-B-002 |
FNAZ-12RGB-W-002
Rated Voltage| 12V
Fan Speed| 1500 RPM
Max. Air Pressure| 1.26 mm-H20
Max. Air Flow| 47RPM
Max. Noise Level| 28.7dB(A)
Bearing Type| Sleeve Bearing
Life expectation| 60,000 hrs,40 C
Connector
| 3-Pin
4-PIN RGB: Male & Female
Fan Dimension| 120x120x25mm
Color| 7 Color with RF remote 16.8M with LUMI
The first RGB fan is to be connected to the RGB LED control board in the chassis, while the rest of them can be daisy-chained to the first one with their own male and female plugs.
- If you have an RGB-compatible motherboard, then you can connect the Hurricane fan’s 4-pin connector directly into your motherboard. You can then adjust fan colors using your native fan control software.