ARCAM SH317 AVR and AV Processor User Guide
- June 6, 2024
- ARCAM
Table of Contents
- ARCAM SH317 AVR and AV Processor User Guide
- English
- Playing via a wireless network
- Playing via a wireless network – Continued
- Playing via a wired network
- Playing via a wired network – Continued
- Connecting external sources
- CAUTION FCC AND IC STATEMENT FOR USERS (USA AND CANADA ONLY)
- FCC SDOC SUPPLIER’S DECLARATION OF CONFORMITY
- Federal Communication Commission Interference Statement
- (i) FCC AND IC INFORMATION FOR USERS
- (ii) FCC/IC Radiation Exposure Statement
- FCC and IC Caution:
- IC Caution:
- Read More About This Manual & Download PDF:
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
ARCAM SH317 AVR and AV Processor User Guide
English
This guide is intended to allow quick setup of your Arcam AVR.
Please download the safety information and user manual from the AVR product
page at www.arcam.co.uk. The user manual contains full details of all the
features of the AVR and how to use them.
Playing via a wireless network
-
Connect the antennas to the AVR and connect the speaker outputs of the AVR to your speakers.
Note: 2.1 speaker setup shown for clarity.
-
Power the unit on and wait for one minute for it to initialise.
3a. Setup via Apple AirPlay:
Open the WiFi settings menu on the iPhone, select the Arcam AVR in the “set up new AirPlay speaker” menu and follow the on screen instructions. If assistance is needed please visit Apple’s support website https://support.apple.com 3b. Setup via Chromecast Built In:
Download and install the Google Home app from the App Store or Google Play.
Open Google Home App on your mobile device and follow the onscreen instructions to set up a new device. If assistance is needed please visit Google’s support website https://support.google.com
4a. To listen to audio via AirPlay:
Ensure your Apple device is connected to the same network as the AVR and
select the AVR as the AirPlay audio playback device.
Playing via a wireless network – Continued
4b. To listen to audio via Chromecast Built In:
Ensure your device is connected to the same network as the AVR. Tap the
Chromecast built-in icon from within the application and select the AVR as the
playback device. 4c. To listen to audio via Harman MusicLife: Download and
install the Harman MusicLife application from the App Store or Google Play.
Ensure your device is connected to the same network as the AVR select the AVR
from the audio output menu and select your audio source from the list.
Playing via a wired network
- Connect the AVR to your router. Connect the speaker outputs of the AVR to your speakers.
Note: 2.1 speaker setup shown for clarity.
4a. To listen to audio via AirPlay:
Ensure your Apple device is connected to the same network as the AVR and select the
AVR as the AirPlay audio playback device.
Playing via a wired network – Continued
4b. To listen to audio via Chromecast Built In:
Ensure your device is connected to the same network as the AVR. Tap the
Chromecast built-in icon from within the application and select the AVR as the
playback device. 4c. To listen to audio via Harman MusicLife:
Download and install the Harman MusicLife application from the App Store or
Google Play.
Ensure your device is connected to the same network as the AVR select the AVR
from the audio output menu and select your audio source from the list.
Connecting external sources
-
Connect the speaker outputs of the AVR to your speakers. Note: 2.1 speaker setup shown for clarity.
-
Connect your source components to the required inputs and a display to the required HDMI output.
Note: Blu-ray player with optional digital audio connection shown. -
Power the unit on and wait for one minute for it to initialise.
-
Select the required input using the remote or front panel control.
Important Safety instructions
-
Read these instructions.
-
Keep these instructions.
-
Heed all warnings.
-
Follow all instructions.
-
Do not use this apparatus near water.
-
Clean only with dry cloth.
-
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
-
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
-
Do not defeat the safety purpose of the polarized or grounding-type plug.
A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. -
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
-
Only use attachments/accessories specified by the manufacturer.
-
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
-
Unplug this apparatus during lightning storms or when unused for long periods of time.
-
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. -
Object or liquid entry
WARNING – Take care that objects do not fall and liquids are not spilled into the enclosure through any openings. The equipment shall not be exposed to dripping or splashing. Liquid-filled objects such as vases should not be placed on the equipment. -
Climate
The equipment has been designed for use in moderate climates and in domestic situations. -
Cleaning Unplug the unit from the mains supply before cleaning.
The case should normally only require a wipe with a soft, lint-free cloth. Do not use chemical solvents for cleaning.
We do not advise the use of furniture cleaning sprays or polishes as they can cause permanent white marks. -
Power sources Only connect the equipment to a power supply of the type described in the operating instructions or as marked on the equipment.
The primary method of isolating the equipment from the mains supply is to remove the mains plug. The equipment must be installed in a manner that makes disconnection possible. -
Abnormal smell
If an abnormal smell or smoke is detected from the equipment, turn the power off immediately and unplug the equipment from the wall outlet. Contact your dealer and do not reconnect the equipment. -
Damage requiring service The equipment should be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged, or
B. Objects have fallen, or liquid has spilled into the equipment, or
C. The equipment has been exposed to rain, or
D. The equipment does not appear to operate normally or exhibits a marked change in performance, or
E. The equipment has been dropped or the enclosure damaged.
CAUTION: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel.
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
The lightning flash with an arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of uninsulated ‘dangerous voltage’ within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and CAUTION: In Canada and the USA, to prevent electric shock, match the wide blade of the plug to the wide slot in the socket and insert the
plug fully into the socket. Class II product
This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth (“ground” in the U.S.)maintenance (servicing) instructions in the literature accompanying the product
CAUTION FCC AND IC STATEMENT FOR USERS (USA AND CANADA ONLY)
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAN ICES-3(B)/NMB-3(B)
FCC SDOC SUPPLIER’S DECLARATION OF CONFORMITY
HARMAN International hereby declares that this equipment is in compliance with the FCC Part 15 Subpart B.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modifications not expressly approved by HARMAN could void the user’s authority to operate the equipment.
(i) FCC AND IC INFORMATION FOR USERS
This device complies with Part 15 of the FCC rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference; and (2) this device must accept any interference received, including interference that may cause undesired operation.
(ii) FCC/IC Radiation Exposure Statement
This equipment complies with FCC and ISED radiation exposure limits set forth for an uncontrolled environment. In case this equipment has to subject to FCC/IC SAR (Specific Absorption Rate) exposure test, this equipment is designed to meet the requirements for exposure to radio waves established by the FCC and ISED. These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the body or on the head, with no separation. To meet RF exposure guidelines and reduce exposure to RF energy during the operation, this bequipment should be positioned at least this distance away from the body or the head.
FCC and IC Caution:
High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and/or damage to LE LAN (Licence-Exempt Local Area Network) devices. . No configuration controls are provided for this wireless equipment allowing any change in the frequency of operations outside the FCC grant of authorization for US operation according to Part 15.407 of the FCC rules.
IC Caution:
User should also be advised that:
(i) The device for operation in the band 5150 – 5250 MHz is only for indoor
use to reduce the potential for harmful interference to co-channel mobile
satellite systems; (ii) the maximum antenna gain permitted for devices in the
bands 5250 – 5350 MHz and 5470 – 5725 MHz shall comply with the e.i.r.p.
limit: and
(ii) The maximum antenna gain permitted for devices in the band 5725 – 5825
MHz shall comply with the e.i.r.p. limits specified for point-to-point and non
point-to-point operation as appropriate.
Use Restriction Attention in European Union, operation is limited to indoor
use within the band 5150-5350 MHz.
Correct disposal of this product (Waste Electrical & Electronic Equipment)
This symbol means the product must not be discarded as household waste, and
should be delivered to an appropriate collection facility for recycling.
Proper disposal and recycling helps protect natural resources, human health
and the environment. For more information on disposal and recycling of this
product, contact your local municipality, disposal service, or the shop where
you bought this product.
This product is RoHS compliant.
This product is in compliance with Directive 2011/65/EU, and its amendments,
on the restriction of the use of certain hazardous substances in electrical
and electronic equipment.
REACH
REACH (Regulation No 1907/2006) addresses the production and use of chemical
substances and their potential impacts on human health and the environment.
Article 33(1) of REACH Regulation requires suppliers to inform the recipients
if an article contains more than 0.1 % (per weight per article) of any
substance(s) on the Substances of Very High Concern (SVHC) Candidate List
(‘REACH candidate list’). This product contains the substance “lead”(CAS-No.
7439-92-1) in a concentration of more than 0.1% per weight. At the time of
release of this product, except for the lead substance, no other substances of
REACH candidate list are contained in a concentration of more than 0.1% per
weight in this product.
Note: On June 27, 2018, lead was added to the REACH candidate list. The
inclusion of lead in the REACH candidate list does not mean that lead-
containing materials pose an immediate risk or results in a restriction of
permissibility of its use. Instructions for Users on Removal, Recycling and
Disposal of Used Batteries
To remove the batteries from your equipment or remote control, reverse the
procedure described in the owner’s manual for inserting batteries. For
products with a built-in battery that lasts for the lifetime of the product,
removal may not be possible for the user. In this case, recycling or recovery
centers handle the dismantling of the product and the removal of the battery.
If, for any reason, it becomes necessary to replace such a battery, this
procedure must be performed by authorized service centers. In the European
Union and other locations, it is illegal to dispose of any battery with
household trash. All batteries must be disposed of in an environmentally sound
manner. Contact your local waste-management officials for information
regarding the environmentally sound collection, recycling and disposal of used
batteries.
WARNING: Danger of explosion if battery is incorrectly replaced. To reduce
risk of fire, explosion or leakage of flammable liquid/gas, don’t disassemble,
crush, puncture, short external contacts, expose to temperature above 60°C
(140°F), sunshine or like, expose to extremely low air pressure or dispose of
in fire or water. Replace only with specified batteries. The symbol indicating
‘separate collection’ for all batteries and accumulators shall be the crossed-
out wheeled bin shown below:
According to EU Batteries Directive 2013/56/EU, any batteries, accumulators and button cells containing more than 0.0005 % mercury, more than 0.002 % cadmium or more than 0.004 % lead, shall be marked with the chemical symbol for the metal concerned: Hg, Cd or Pb respectively. Please Refer to the below symbol:
HARMAN International hereby declares that this equipment is in compliance with
the essential requirements and other relevant provisions of Directive
2014/53/EU.
HARMAN International Industries, Incorporated. All rights reserved. Arcam is a
trademark of HARMAN International Industries, Incorporated, registered in the
United States and/or other countries.
Features, specifications and appearance are subject to change without notice.
Android Google, Google Play, Chromecast, Chromecast built-in, Google Home and
other related marks and logos are trademarks of Google Inc. Apple, AirPlay and
iTunes are trademarks of Apple Inc., registered in the U.S. and other
countries. App Store is a service mark of Apple Inc.
MQA and the Sound Wave Device are registered trade marks of MQA Limited.© 2016
MQA (Master Quality Authenticated).
MQA is an award-winning British technology that delivers the sound of the
original master recording. The master MQA file is fully authenticated and is
small enough to stream or download. Visit mqa.co.uk for more information. Your
Arcam AVR includes MQA technology, which enables you to play back MQA audio
files and streams, delivering the sound of the original master recording.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>