Thomann 506559 FPY Studio Podcast Desk Instruction Manual

Thon Studio Podcast Desk
506560 FPY white
506559 FPY graphite black

Protecting the environment

Disposal of the packaging material
For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling.
Ensure that plastic bags, packaging, etc. are properly disposed of.
Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.

Safety instructions

DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are properly disposed of and are not in the reach of babies and young children. Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the like) from the product. They could swallow the pieces and choke!
Never let children play unattended with the product.
** CAUTION!
The danger of hand cuts**
Pay attention to sharp edges on tools, screws, and components when assembling and screwing the items together.

Scope of delivery

2 x Side Panels A+B
1 x tabletop C
2 x rear board G
2 x stabilization board F
18 x dowel L
18 x Connector Housing M
18 x Connecting Bolt N
1 x cable passage O

Installation

Assembly with 2 people
For assembly, place all components on a suitable assembly surface. Use a soft pad in order to avoid damage to the surfaces.

1. Push 4 connecting bolt N + 4 connector housing M + 4 dowel L into the sideboard A+B.
   

2. Push 6 connector housing I + 6 dowel L into the rear board G.
   

3. Push 4 connector housing I + 4 dowel H into the stabilization board F

4. Push 10 connecting bolt N into the tabletop C

5. place the sideboard A on a soft assembly surface. Insert G+F on A and tighten all connector housing M push the sideboard B onto the mounted Parts and tighten all connector housing M
   

6. push the stable top C onto the mounted Parts and tighten all connector housing M

optional accessories

Installation Accessoires

1. assembly optional pull out shelf
   
   Scope of delivery
   1 x drawer board H
   2 x pull-out fitting P
   8 x screw K
   

2. Attach the pull-out fittings P depending on the height required, can be fixed horizontally with 8 screws K on the sideboard A+B (stop bar must point to the rear) Insert pull-out board H (stop bar front) into the pull-out rails P

3. assembly optional 3U Podcast Rack
   Scope of delivery
   1 x display board D
   2 x sideboard E
   2 x rack strip + screwset I
   4 x screw rack strip J
   4 x screw long rack strip Q
   4 x dowel L
   4 x connector housing M
   4 x connecting bolt N
   1 x cable passage O
   

4. Remove tabletop D and turn around. Place a piece of wood under the drill holes. Carefully drill the 4 holes with a 4 mm drill bit. Insert 4 screws Q from below and fasten the side parts E. Mount the display board D onto the mounted parts E. Tighten the connector housing M. Fasten rack rails I vertically to the side parts E using screws J (installation with 1 cm distance to the front edge). Put the tabletop with the mounted rack attachment back on the podcast table and tighten the connector housings M.
   

Technical specification

Podcast Desk

Podcast Rack 3HE – 3U

Podcast Desk drawer

Podcast Desk BK, graphitschwarz – graphite black Nr. 506559
Podcast Desk WH, weiss – white
Nr. 506560
Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.de   

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>