YARDLINK Cedar No Dig Fencing System Instruction Manual
- June 6, 2024
- YARDLINK
Table of Contents
Cedar
No Dig Fencing System
Install
Panel ring
rests on top of stake sleeve Bottom gate hinge rests or top of base panel
ring
Drop
post through rings & hinges then into stake sleeve
Swing attached Base Unit into place Use Post to
mark next stake position
Continue adding panels, using the panel to mark the position of the next stake
Left panel (lower) rings to rest on top of stake sleeve Right
panel (raised) rings to rest on top of left panel rings Push post through all
rings and into stake sleeve
Gate Latch Installation
Drill pilot 1/16″ holes in positions shown and attach latch to wood picket
with Phillips screws.
Gate halves must be installed with 1/2″ between and with top rails aligned
Gate Adjustment
Questions, problems, missing parts? Before returning to your retailer, call
our customer service department at 800.607.6409, 8:00 am — 5:00 pm EST Monday
— Friday. Or eMail us at
CustomerService@OPBglobal.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>