LED DMX WiFi Controller Touch RGBW 4 Zonen User Manual
- June 6, 2024
- Zonen
Table of Contents
LED DMX WiFi Controller Touch RGBW 4 Zonen – User Manual
Product Description
The controller is a touch panel and sends DMX signals to the DMX decoder for connection. It has a highly sensitive glass touch panel with which each color or scene can be adjusted. This controller is suitable for any RGB or RGBW LED light and can be controlled via WIFI with IOS/Android software. Mounting on a standard 68mm flush-mounted socket.
Performance Para-
Operation Voltage | 12-24VDC |
---|---|
Output Signal | DMX512 |
Product Dimensions (L x W x H in mm) | L 86 x W 86 x H 29,1 mm |
Button Introduction
Button Function:
Operation
Description of Zone Buttons:
Each Zone has 4 addresses adjusted.
Button 1 have the address 1-4 adjusted, Button 2 have the address 5-8,
Button 3 has the address 9-12, Button 4 has the address 13-16.
In total 16 addresses
After connecting well with the DMX decoder, please set the DMX decoder address
as below
Adress 001 – 004 = Zone 1
Adress 005 – 008 = Zone 2
Adress 009 – 012 = Zone 3
Adress 013 – 016 = Zone 4
You control the individual zones of the DMX controller via different DMX
addresses
the short press zone number is to choose a zone, the long-press zone number is
turned on/off that zone individually
How to save a color or mode:
You can select a zone (eg zone key 1) – Press Select the desired color on the
color wheel or the scene mode using the Play / Pause button. Press the „S“ key
for 3 seconds until the indicator turns into pink color and thereafter the
numbers 1-4 for the desired model in the selected zone. The LED will flash
means the color or mode in the zone saved. Each zone can save 4 colors or
modes.
how to get that saved color or mode:
Press desired zone by button 1-4 -> then short press the „S“ key and select
the stored mode using keys 1-4, depending on the scene of saved in the zone
WIFI connection
-
Download the APP on your Android/IOS System. Open the WIFI connection setting interface and connect your Android/IOS System with the „EASYCOLOR“, „REAL COLOR“ or „EASYLIGHTING“ network.
-
Open the network „EASY COLOR“ you installed, press the setting interface and enter the following:
SSID: EASYCOLOR
IP: 10.10.100.254 :8899
Name: (the name you want or don’t enter anything) -
Activate the WIFI Connection and press the back button to go back to the main operating system from your Android/IOS System.
The APP is 8 zone control. so you may set mor zones for the WiFi control as
below:
DMX Adress 001 = Zone 1
DMX Adress 005 = Zone 2
DMX Adress 009 = Zone 3
DMX Adress 013 = Zone 4
DMX Adress 017 = Zone 5
DMX Adress 021 = Zone 6
DMX Adress 025 = Zone 7
DMX Adress 029 = Zone 8
Dimensions
Installation
Conjunction Diagram
Safety warnings
-
To avoid installing the product in a minefield, strong magnetic field, and high voltage area.
-
To ensure the wiring is correct and firm avoiding short circuit damages to components and causing a fire.
-
Please install the product in a well-ventilated area to ensure an appropriate temperature environment.
-
The product must be worked with a DC constant voltage power supply.
Please check the consistency of input power with the product, if the output voltage of the power complies with that of the product. -
Connecting the wire with the power on is forbidden. Ensure proper wiring first then check to ensure no short-circuit, then power on.
-
Don‘t repair it by yourself whenever an error occurs. Contact the supplier for any inquiry.