FAVORWE LED Solar Street Light Instruction Manual
- June 6, 2024
- FAVORWE
Table of Contents
LED SOLAR STREET LIGHT
INSTRUCTION MANUAL
Thank you for purchasing FAVORWE products! Please read all instructions before installing, servicing, or performing routine maintenance of this light. If you have any questions related to our product, please feel free to contact us by favore-customerservice@outlook.com
IMPORTANT SAFETY INSTRUCTIONS
- Do not connect to the solar panel above 6 volts to avoid damage to the solar light.
- Do not connect to an AC power supply to avoid damage to the solar light.
- Do not install the solar panel in shaded areas, it must be installed to a place with sufficient sunlight.
- Do not look directly at the lighted light to avoid damage to the eyes.
- Please make sure that the light and the solar panel have been tightly fixed to avoid accidents on windy days.
- Please check regularly if the wire is loose, fall off, or broken.
- Please recycle batteries of the solar panel as they can be reused after being processed.
- Please keep out of the reach of children, check small parts, and destroy packing materials, as these may be hazardous to children.
- Please clean the surface of the solar panel every three months to guarantee the illumination of the light.
- Please switch off the light before maintenance or cleaning.
- Non-professionals are not allowed to repair, disassemble or modify the product.
(NOTE: Maintenance, disassembly or modification of the product by non- authorized personnel will void the warranty. )
PARAMETERS
| Polycrystalline Solar Panel | 200W/300W |
|---|---|
| Lithium Iron Phosphate Cell | 32700 3.2V 30,000mAh 19.2Wh 3 (5pcs*6000mAh, |
included)
Frequency| 50-60 Hz
Beam Angle| 60°
Color Temperature| 6000K
Working Temperature| -4°F —140°F
Charging Time| 6-8 hours by bright sunlight
Operation Mode| Dusk-to-Dawn Mode, Remote Control Mode
Working Time| 14-16H
Brightness| 1st hour 100% brightness, 2nd-4th hour 50% brightness, 5th-8th
hour 20% brightness
PACKING LIST
REMOTE CONTROL INSTRUCTION
Dusk-to-Dawn Mode: The street light will turn off automatically when the light intensity reaches a certain level and vice versa. Remote Control Mode :
- Press the key ‘3H’, ‘5H’, ‘8H’, ’10H’, ’12H’ or ‘AUTO’ to turn on the light or press the key `On/Off’ 2-3 seconds to turn on the light.
- Press the key ‘3H’, ‘5H’, ‘8H’, ’10H’ and ’12H’, the street light will flicker once; press the key ‘AUTO’, it will flicker twice, long-press the key ‘On/Off’, it will flicker three times. All flickers mean the light receives the signal from the remote control.
Factory Default Function: Dusk-to-Dawn and Remote Control (100% Brightness and Auto Mode)
Note: The distance between the remote control and the light fixture signal receiving head ranges from 26 to 49 feet.
INSTALLATION INSTRUCTION
ASSEMBLY
- Align the Panel Tray (E) to the Solar Panel (B) , then fasten with Panel Tray Screw Accessories (H).
- Assemble the Panel Bracket (F) onto the assembled solar panel. Please note the order of the screw accessories, as shown.
- Assemble the Fixture Bracket (D) to the integrated solar panel with Fixture Bracket Screws (G).
- Pass the cable of the light fixture into the Fixture Bracket( D ) and lead out from the front hole of the Fixture Bracket.
- Put the Light Fixture ( A ) onto the Fixture Bracket ( D ) , then fix it with Light Fixture Screws ( K ) and secure it with the Alle Wrench ( L ) provided.
- Connect the light fixture cable and the solar panel cable.
MOUNTING
WALL MOUNTING
Mount the integrated solar street light onto the selected wall and fasten it
with Screws (J). POLE MOUNTING
Mount the integrated solar street light onto the pole with Pole Mounting
Expansion Accessories (M).
SOLAR PANEL’S ADJUSTMENT
- The solar panel can be tilted up and down by 45 degrees
- The fixture bracket can be rotated left and right by 90 degrees.