XTC OD B08JCGC8PV Guitar Effect Pedal Owner’s Manual
- October 27, 2023
- XTC OD
Table of Contents
Owner’s Manual
Reissue Series
The NUX XTC OD pedal from the Reissue Series gives you the overdrive tone from the red channel of the famous boutique amplifier. It has rich harmonics and fast response. The NUX XTC OD is a go-to box ideal for Blues and Classic Rock!
Overview
- Pure Analog Circuit
- Smooth and Dynamic Distortion
- Level, Gain, Tone
- True-bypass Hardware Switching
Specifications
- Input impedance: 1M Ohms
- Output impedance:10K Ohms
- Power: 9V battery or external AC adaptor delivering 9V DC regulated minimum 300mA ( )
- Dimensions: 121(L) X 77(W) X 48(D) mm
- Weight: 230g
- Do not place near heat sources, such as radiators, heat registers, or appliances which produce heat.
- Guard against objects or liquids entering the enclosure.
- Refer all servicing to qualified service personnel.
- Prolonged listening at high volume levels may cause irreparable hearing loss and/or damage. Always be sure to practice “safe listening”.
Follow all instructions and heed all warnings
KEEP THESE INSTRUCTIONS!
Product Interface
1.POWER Jack
Use a regulated 9V DC adapter with Negative Tip to power this pedal. It’s
highly recommended using the optional NUX ACD-006 Adaptor. Using an
incompatible adaptor may cause noise or mal-function.
2.LEVEL Knob
Sets the output volume of this pedal.
3.TONE Knob
Adjust the high frequency.
4.GAIN Knob
Sets the overdrive amount.
5.OUTPUT Jack
Connect an amplifier into this jack.
6.INPUT Jack
Connect your guitar into this jack. Plugging in this jack switchon the power
whether the effect is engaged or bypassed. When not using this pedal,
disconnect the cable from this jack to save battery life.
7.ON/OFF Switch
Turns On/Off the effect.
Installing The Battery
A battery is supplied with the unit. Connect the snap cord to the battery and insert the battery as shown in the drawing. When the battery runs down the sound will change. In such case please replace with new battery. The power comes on when you insert the plug into the INPUT jack. The use of an AC adaptor is recommended as the unit’s power consumption is relatively high.
Accessories
• 9V battery • Owner’s manual • Warranty card
- Specifications and features are subject to change without notice.
WARNING!-IMPORTANT SAFETY INSTRUCTIONS
BEFORE CONNECTING, READ INSTRUCTIONS
WARNING: To reduce the risk of fire or electric shock, do not expose this
appliance to rain or moisture.
CAUTION: To reduce the risk of fire or electric shock, do not remove
screws. No user-serviceable parts inside. Refer servicing to qualified service
personnel.
The lightning symbol within a triangle means “electrical caution!” It indicates the presence of information about operating voltage and potential risks of electrical shock.
The exclamation point within a triangle means “caution!”
Please read the information next to all caution signs.
CE mark for European Harmonized Standards
CE Mark which is attached to our company’s products of Battery mains the product is in fully conformity with the harmonized standard(s) EN 61000-6-3:2007+A1:2011 & EN 61000-6-1:2007 Under the Council Directive 2004/108/EC on Electromagnetic Compatibility.
www.nuxefx.com Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>