LeKKeR Jordaan 3-Speed Womens eBike Instruction Manual
- June 6, 2024
- LeKKeR
Table of Contents
Assembly & Maintenance
Guide
Jordaan 3-Speed Womens
Enjoy your Jordaan 3-Speed
Dear LEKKER Customer, First and foremost – congratulations on your brand new
bicycle! We can’t wait for you to experience the thrill and joy of riding your
LEKKER bike, the Amsterdam way. But before you do, we want to help you make
sure your bike is in tip-top condition, as well as provide you with some tips
and tricks to keep it that way.
This manual will outline all the tools and knowledge needed the idea of how to
service and maintain your bicycle. to put the finishing touches on your bike,
as well as how to use it, and useful guidance on maintenance and care. Feast
your eyes on what’s to come – we guarantee it’ll be worthwhile, even if you’re
an experienced rider. Your Lekker Team
The first few chapters are particularly important, for both your enjoyment and
safety, as we walk you through key steps in ensuring your bike is safe to
ride.
Please also note that as your brand new Jordaan 3-Speed is hot off the press,
the images in this manual might not be reflective of the bike that’s in front
of you. The images used are from one of our older bike models. And without
them, we thought your manual wouldn’t look quite so beautiful.
Please also note that as your brand new Jordaan 3-Speed is hot off the press,
the images in this manual might not be reflective of the bike that’s in front
of you. The images used are from one of our older bike models. And without
them, we thought your manual wouldn’t look quite so beautiful.
Note: We have to stress that this manual won’t teach you all the skills
of a bicycle mechanic. Even a manual the size of every Harry Potter book
combined couldn’t detail every possible combination, trick, and available
component. For this reason, our manual is only applicable to your new LEKKER
bicycle and its assembly, alongside any important notes, warnings, and
maintenance guides.
Getting Started
We’ve created this manual to help you put the finishing touches on your LEKKER bike. Run through these quick steps and you’ll be exploring and adventuring in no time. So, without further ado, unbox your LEKKER bike and feast your eyes on your newest sidekick. Once you’ve removed the packaging, make sure you have your trusty toolkit to hand, as shown in the illustration on the next page.
Fitting the front wheel and fender
Step 1: Attach the front fender
Referring to step 1 in the illustration, loosen the nut and bolt (using the 2x
5mm Allen keys) that runs through the front fork and attach the fender, making
sure there’s enough space between the tire and the fender.
Step 2: Attaching the front stay to the front fork
Referring to step 2 in the illustration, attach the front fender stay to the
front fork, using the 3 or 4mm Allen key bolt
Step 3: Putting the wheel in place
Referring to step 3 in the illustration, put the wheel in place and tighten
the wheel nut using the 15mm spanner
Now, on to the brakes.
Aligning the brakes
Lift the wheel off the ground and give it a spin. It should spin freely and
without any noise. If you hear a metallic rubbing sound, then the brakes will
need adjusting.
To do this, you’ll need to use the 5mm Allen key. With the bike upside down,
adjust the caliper. You will need to slightly loosen the two 5mm Allen key
bolts (found on the top of the caliper), so that you can gently move the
caliper horizontally, allowing the disc rotor to move freely between the brake
pads.
Aligning the gears
Step 1: Checking alignment
Begin by engaging the fourth gear on your shifting system. With the fourth
gear engaged, the yellow lines should be aligned next to each other at your
wheel axel.
Step 2: Adjusting alignment
Located on your handlebar shifter, turn the Gear Barrel Adjustor clockwise or
anti-clockwise to bring the yellow lines intom alignment.
Fitting the saddle and handlebars
Saddle.
Using the 5mm Allen key, loosen the Seatpost clamp bolt and insert the seat
post. Make sure it’s at the correct height. When sitting on the saddle, your
knee should be at a slight bend when the pedal is at its lowest position.
Then, tighten the bolt.
Tip: Using a 5mm Allen key you can also adjust the angle of the seat post
and its front-to-back position of it. However, this should be correctly set
already.
Handlebars.
Step 1 : Now, using a 6mm allen key, loosen the bolt located at the top
of the handlebar stem, then insert it into the frame. Once inserted, centre
the handlebar and stem and tighten it.
Step 2: To adjust the angle of the handlebar, loosen the Allen bolts of
the front plate until you can move the handlebar freely. Once you’ve found
your preferred bar angle,
tighten the bolt.
Tip: Should you wish to adjust the angles of your grips, brakes, and
shifter, you can do so with a simple turn of Allen key 3 or 4.
Steering Lock.
Your Jordaan 3-Speed comes fitted with a steering lock to help keep your bike
stationary when the kickstand in use.
Simply turn clockwise to engage the lock, or anti-clockwise to disengage.
Fitting the pedals
To assemble the pedals, you will need a 15mm open-ended spanner. Insert the
pedal into the crank and ensure the pedals are properly tightened.
LEFT pedal: this is the pedal that has indented horizontal lines on the
small part between the pedal and thread.
RIGHT pedal: This pedal has no indented lines and is smooth in between
the pedal and thread
ATTENTION: please make sure you check the thread direction before
inserting the pedals. Fitting the pedal to the wrong side can damage the crank
arm and is not covered under warranty.
Finishing Touches
Bell: Install the bell on your handlebars, in your preferred position.
Generally, this is on the left-hand side, next to the brake lever.
Lights: Both the front and rear racks have mounting points for lights.
Rear Light: The rear rack mounting point is located at the very rear of
the rack. Using the two 8mm bolts supplied with the lights, mount them using
the two mounting holes and tighten them.
Front Light:
Attach the front light to the light holder that’s attached to the front fork.
If you’ve purchased a front rack, the front light attaches to the light holder
in the middle of the rack. Using the nut and bolt provided, tighten the light
onto the fixture.
Tip: Make sure you remove the plastic battery tab.
Accessories: If you ordered any accessories such as racks or locks, don’t
forget to fit these too. They each come with their own instructions and also
have their own mounting points.
Now, you’re good to go. Enjoy your ride, the Amsterdam way!
Safety and warranty
We offer a 2-year warranty on our LEKKER frames. Additionally, we supply you
with 2 years warranty on the components of our different models starting on
the day of purchase. This warranty is only for replaceable components.
Unfortunately, our warranty is not transferable (including when sold to
another consumer) and can only be used
by the original buyer of a LEKKER product. If you want to use the warranty,
please ensure you have your receipt and go to the original shop in which you
made your
purchase.
There are cases when our warranty isn’t valid. Our warranty doesn’t cover wear
and tear, incorrect assembly, or maintenance. There’s no warranty in the case
of; damage caused
by accidents, improper use, or negligence. Our warranty is also void if
changes are made to the original design of the LEKKER bike.
Please note: your frame number is located on the bottom of the bike frame,
near the bottom bracket. This might be needed for insurance purposes.
Assembly & Maintenance Guide
Jordaan 3-Speed
Womens
lekkerbikes.com
Contact
Australia
Phone 03 4828 3202 – Melbourne 03 4828 3202 – Sydney
Address
23 Provost Street, North Melbourne, 3051, VIC. Australia 415 Bourke Street,
Surry Hills, 2010, NSW. Australia
Warning
For safety purposes, it is recommended that you have this bicycle assembled by
a skilled bicycle mechanic.
Email
info.au@lekkerbikes.com
sydneystore@lekkerbikes.com
Europe & USA
Phone +31-681878491
Address Tweede Kostverlorenkade 68 Amsterdam, The Netherlands
Email info.eu@lekkerbikes.com
info.us@lekkerbikes.com
lekkerbikes.com