KOAMTAC KDC270 Ring Scanner Instruction Manual
- June 6, 2024
- KOAMTAC
Table of Contents
KOAMTAC KDC270 Ring Scanner Instruction Manual
What’s in the box?
-
1 KDC Ring Scanner
-
1 Large Finger Stabilizer
-
1 Small Finger Stabilizer
Additional KDC270 Accessories:
- Charging Cradle
- Protective Boots
- Finger Trigger Glove
Installation Instruction
-
Open bottom flap and pull adaptor out of pocket being careful not to strain attached cable. (A,B)
-
Insert KDC270 into pocket and connect adaptor to bottom of scanner. (C,D)
-
Slide the KDC270, with adaptor attached, all the way into the pocket and close flap. (E,F)
-
If finger stabilizer is needed (typically when using scanner with 1 finger): open bottom strap and insert best-fitting stabilizer with broader side closest to scan button. (G, H, I)
Removal Instruction
-
Open flap and remove KDC270 half-way; any further may cause damage to the cable. (J,K).
-
Disconnect the adaptor from KDC270 one side at a time. Do not pull from both sides. (L,M)
Return adaptor to pocket and close flap for storage.
Customer Support
Address: 116 Village Blvd, Ste 305, Princeton,NJ 08540
Phone: +1 609-256-4700 NI
+1 609-228-4373
Email: info@koamtac.com
Website: www.koamtac.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>