BOOM SHROOM SP-1.0 Mushroom Wireless Speaker User Manual
- June 6, 2024
- BOOM SHROOM
Table of Contents
MushroomWirelessSpeaker
User Manual
Model No.: Mushroom Wireless Speaker
Introduction
Thank you for using our company’s products, in order to enable you to operate the speaker as easily as possible. Please read this manual carefully before you begin to use it.
Product Specification:
Bluetooth version: 5.0
RMS: 5.0 W 1
Impedance:: 4Ω
Working distance:≥10M
Frequency response: 90HZ‐‐20KHZ
Signal‐to‐noise ratio:≥60dB
Input sensitivity: 600±100m
Distortion:≤0.3%
Product Size：W140D140 * H150 mm
Charge voltage: DC 5V
Battery : 600mah/3.7V
Playing time: 1.5‐3.0 hours
How to use:
How to Operation
- Keep the press slide roller to “ON” to power on the device, to use the following functions:
- Note: Once finished using, Keep the press slide roller to “OFF to turn off the device.
How to Pair Bluetooth :
- When powered on, the speaker makes a prompt voice, When the indicator light flashes in blue, the speaker is ready to pair with your device.
- Please check phone searches for pairing names, devices to connect. Once paired, the speaker makes a prompt voice.
- From this moment, you can control the music from your mobile device, or from the receiver. (pls follow the How to use the button)
How to use the Button
- Double-press the slide roller to switch Bluetooth mode or AUX mode
- Short press “ II/M» IM” to play or pause
- Keep press the slide roller and release the control button‐k to left or right to play next/previous song
- Short press the slide roller and release the control button‐k to left or right to volume + /volume ‐.
How to play the Audio Input (AUX mode):
Insert the micro USB cable into the micro USB port, and insert the 3.5mm jack
into your mp3/mp4 player/mobile phone or another compatible device to play the
music.
Note: When connecting the cable, the device does not change mode
automatically. Press” II/M” to switch to AUX Mode.
How To Charge
- Insert the Micro USB connection into the Micro USB port on your device and connect the other end of the cable to your PC or AC/DC adaptor to charge the speaker.
Note: At the end of charging, do not forget to disconnect the cable, the charging time can not exceed 8 hours.
Warnings:
-
Do not hit or crush it seriously.
-
Do not contact benzene, diluent, and other chemicals.
-
Do not use a nearby strong magnetic field or electric field.
-
Avoid direct rays or heating appliances.
-
Do not dismantle, repair or modify this product by yourself, contact an authorized specialist.
-
Do not listen at large volumes for long periods of time, so as not to injure the hearing.
-
Do not clean the speaker with water and don’t immerse the speaker in the water. This speaker doesn’t have a waterproof prevention function.
If using the speaker is not by the right way and causes any quality problems, not support the warranty. Kindly note above!. Please clean the speaker with a slightly damp cloth. -
when used at low voltage, it may cause distortion of sound, and please charge it in time.
-
Bluetooth is compatible with common smartphones and tablets, but depending on the device or application you use, may not be able to support a particular feature.
Troubleshooting:
| Fault | Solution |
|---|---|
| Unable to pair with another device | 1. Check whether the speaker is |
still in the process of searching or switching it off and on again.
2 There are too many Bluetooth devices in the proximity that cause difficulty
in connection. Turn off other Bluetooth devices.
3. Make sure your device is in “Pairing Mode”
The sound is low or distorted.| 4 Check the Bluetooth device volume
and then adjust it to an appropriate level.
5. Recharge the battery.
Occasionally the music stops.| 6. Check whether the speaker effective
transmission range is exceeded or if there is an obstacle between the speaker
and other Bluetooth devices.
Does not turn on or the light Does not up| 7. The battery level is low,
recharge the device.
8. Switch the speaker off and on again.
9. if 7.8 doesn’t solve, please replace a new battery or led light
(Note: Do not dismantle, repair or modify this product by yourself, contact an
authorized specialist.)
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by the manufacturer could void your authority to operate this
equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two
conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may
cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>