NEW LEAF C3101R Wireless Switch and Controller Installation Guide
- June 6, 2024
- NEW LEAF
Table of Contents
Installation Guide
Wireless Switch and Controller
To avoid electric shock while installing the Receiver, please disconnect the
mains voltage (switch off circuit breaker) before installation. Failure to
observe the installation instructions can cause fire or other hazards. Do not
attempt to service or repair the product yourself. We recommend the
installation by a qualified electrician only. Do not continue to operate the
product if it becomes visibly damaged.
∗Work on 230 V mains supply shall only be carried out by Licensed
Electricians.
Switch Technical Parameters
- Work Type: Reciprocating work by 86 type lever
- Power Model: Power generation by mechanical force
- Work Frequency: 433MHz
- Number Keys: 1, 2, 3 keys
- Color: White
- Lifetime: 100,000 times
- Distance: 30m(indoor), 80m(outdoor)
- Waterproof Level: IPX5
- Weight: 80g
- Certification: CE, ROHS, FCC
- Dimension: L86mm W86mm H14mm
Receiver Technical Parameters For Non-Dimmable Receiver
- Model No: C3101R
- Power Consum p tion: <0.1W
- Working Temperature: -20°C – 55°C
- Storage Capacity: 6 switch-keys
- Power Model: AC 100-250V, 50/60 Hz
- Distance: 30m(indoor), 80m(outdoor)
- Color: White
- Rated Current: 5A/10A
- Weight: 64g
- Comm: ASK / 433MHz
- Certification: CE, ROHS, FCC
- Dimension: L76mm×W44mm×H32mm
Do not place the Receiver controller in a metal enclosure.
Important note: Isolate power before connecting the receiver. Failure to do
so can cause electric shock, fire, or other hazards.
Installation method of stainless steel fixed plate
- Open the switch panel.
- Fix the base on the wall (expansion screw sleeve is needed) or fixture.
- Fix it, install the button shell to the base shell.
Installation method of Double-sided adhesive tape
- Paste the double-sided adhesive on the back of the switch.
- Clean the wall or glass surface to paste the switch on it.
Important note: There are precision parts inside the switch. When installing, it is strictly prohibited to dismantle the panel.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
FCC ID: 2A3RA-S301
Stuck? Confused?
Technical Team: marshall@eco-newleaf.com
Sales Team: anny@eco-newleaf.com