MKOPTO MK02001100 Smart Light Bulb User Manual

June 6, 2024
MKOPTO

MKOPTO LOGO MKOPTO MK02001100 Smart Light Bulb

MKOPTO MK02001100 Smart Light Bulb FIG 6

Get to Know Your Smart Bulb

A smart light bulb is easily dim or brighten, change color, turn on or off via remote control TMwith onn. Smart Home app. No hub needed. It is also available to be controlled by voice and be compatible with Google/Alexa/Siri to build your smart home.

The Specs

  1. White LED Light
  2. Size: 60x117mm(2*4in) 15,000 hour life
  3. WiFi:IEEE 802 11 N, 2.4GHz
  4. Model: MK-020011009287 120V~ 60Hz 0.13A,12W 1100Lumens, 2700-6500K, FCC ID: 2AY5GMK02001100

E26 socket

MKOPTO MK02001100 Smart Light Bulb FIG 2

  1. Stable Wi-Fi network which could access to the device.
  2. A smart phone is running iOS 8 or higher or Android 4.1 or higher.
  3. Install the bulb in an E26 socket

Register Your Account

Scan the QR code below to download the Smart Home app or download the it from APP Store or Google Play.
Open the Smart Life app, tap “Register” to register an account, then sign in the app. Add the device, as the following picture shows.

Add Your Device

MKOPTO MK02001100 Smart Light Bulb FIG 3

Make your router, cellphone, and device are as close as possible. Before connecting, enable bluetooth of cellphone.
Make sure you’re connecting to a 2.4GHz Wi-Fi network. (lt can’t connect to 5GHz networks)
Turn on the bulb 3 times(on-off-on-off-on), confirm light bulb is flickering rapidly. (2 times per second). Note: if network configuration takes more than 8 minutes or fails. Reset the bulb(turn on the bulb 3 times again as mentioned above).
There are two ways to connect with the bulb, one is Add manually, the other is Auto scan

MKOPTO MK02001100 Smart Light Bulb FIG1

Tap + to add

Create Connection

Follow the pictures to create connection for the bulbMKOPTO MK02001100
Smart Light Bulb FIG 4

You can control the brightness in Dimmer model and choose different scene in scene mode.

MKOPTO MK02001100 Smart Light Bulb FIG 5

Federal Communication Commission
Interference Statement:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
RF Exposure: A distance of 20cm shall be maintained between the antenna and users, and the transmitter module may not be co-located with any other transmitter or antenna.
Non-modification Statement:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
FCC Compliance Statement:
This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions:

  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

CAUTION

  • RISK OF ELECTRIC SHOCK –
  • DO NOT USE WHERE DIRECTLY EXPOSED TO WATER NOT FOR EMERGENCY LIGHTING ”ONLY USE THE CONTROL PROVIDED WITH OR SPECIFIED BY THESE INSTRUCTIONS TO CONTROL THIS LAMP.
  • THIS LAMP WILL NOT OPERATE PROPERLY WHEN CONNECTED TO A STANDARD (INCANDESCENT)DIMMER OR DIMMING CONTROL.”

Need help?
We’re here for you every day from 7 a.m.- 9 p.m. CST. Give us a call at 1-888-516-2630

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals