BRUNSWICK 57-501587 Sync Tablet User Manual

BRUNSWICK SYNC TABLET
OPERATION MANUAL
57-501587

IMPORTANT SAFETY INSTRUCTIONS

• CAUTION: Any changes or modifi cations to this equipment could void the product warranty.
• DANGER: To reduce the risk of electrical shock, always unplug this Brunswick product before cleaning or attempting any maintenance activity.
• WARNING: To reduce the risk of burns, fi re, electric shock, or injury, it is imperative to connect each product to a properly grounded electrical outlet.
• WARNING: To prevent injury, this product must be securely attached in accordance with the installation instructions.
• Never operate a Brunswick product if it has a damaged power cord or electrical plug, or if it has been dropped, damaged, or even partially immersed in water. If this occurs, contact Brunswick Customer Support Services.
• Position this product so that the AC power cord plug is accessible to the user.
• Keep the power cord away from heated surfaces. Do not pull the equipment by the power cord or use the cord as a handle.
• If the electrical supply cord is damaged, it must be replaced by the manufacturer, an authorized service agent, or a similarly qualifi ed person to avoid a hazard.
• Always follow the product instructions for proper operation.
• Never insert objects into any opening of the Brunswick product. If an object should drop inside, unplug this Brunswick product and carefully retrieve it while the unit is not in use. If the object cannot be reached, contact Life Fitness Customer Support Services.
• Do not use this product outdoors, near swimming pools, or in areas of high humidity. Do not expose this product to dripping or splashing liquids. If the product should be exposed to liquid, contact Brunswick Customer Support Services.
• Never operate a Brunswick product with the air openings blocked. Keep air openings free of lint, hair, or any obstructing material.
• Use this product only for its intended use as described in this manual. Do not use attachments that have not been recommended by the manufacturer.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Installation:

1. Back view
   a. Assemble the transfer board into the socket of the pedestal.
   b. The network cables and power wires go through the stem of the pedestal.
   c. Connect the network cables from the network router to the RJ45 sockets on the transfer board.
   d. Connect the power wires from the power supply to Jack’s CN1, CN2 on the transfer board.

2. Front view
   a. Put the Sync tablets into the trays of the pedestal.
   b. Connect the cables from tablets to CN3, CN4 on the transfer board.

Tablet:

1. Outline

2. Specification
   Dimension: 253.6mm202.7mm24mm
   Power supply: DC 12 V-13.5 1.5A
   Screen: 10.4 inch
   Camera: 0.2 Megapixels
   Resolution: 1280 x 1024 pixels

3. Turn on/Turn off
   a. Supply AC power to the pedestal, the tablet will automatically turn on.
   b. Disconnect AC power to the pedestal, the tablet will be turned off.

4. In the main menu, choose the APK to operate.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.

You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.

This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 0mm between the radiator & your body.max SAR value (0.252W/kg)

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>