iMagic IM011711 Smart Key Lock Box User Guide
- June 6, 2024
- iMagic
Table of Contents
SMART KEY LOCK BOX
USER GUIDE
PRODUCT
Initial password “123412” #
- Lock body
- Password keyboard
- Cover
- Shackle
- Unlock button
- “#” button
- Charging interface
IN THE BOX
Key lock box1 USB cable1 Screw*4
Anchor4 Manual1 Device QR code sticker*1
PROGRAMING
1. Download APP
Download the ‘ iMagic Living ‘ App from App Store or Google Play
2. Register and log in App
3. ADD the smart lock box
a. Add by scanning device QR code
Device QR code
b. Add via Bluetooth
*Press any key on the device panel to activate the Bluetooth first.
4. Set password
Vague Code – The lock supports up to a 18-digit Vague CODE.
Just enter any 18-digit code, as long as a correct code is included in what
you entered, you can open the door.
EXAMPLE: XXX123412XXX
5. Authorization
Authorization via App friends
Authorize friends’ account, so friends could unlock the keybox via ‘iMagic
living’ App.
a. Add by App friends’ account
b. Scan App friends’ QR code
Authorization via device QR code
Friends could scan the device QR code to send the Authorization Requests to
your account. Accept the request to Authorize the Friends’ account
6. Unbind
*All the Authorization will be invalid after device unbinded.*
Password keep the same after unbinded.**
INSTALLATION
Fixation method
Two methods of fixation
a. Installation on the wall through the screws and the anchors
- Screw hole location
b. Installation on the handles through the shackle
- Press the black button, and pull out the shackle.
- Insert the hanging shackle.
- Adjust the different gear into the right position, finish the installation.
(1) (2) (3)
- button
FCC WARNING:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to ty to correct the interference by one or more of the
following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
ENVIRONMENTAL PROTECTION
Do not dispose with domestic waste. Use special collection points for sorted waste. Contact local authorities for information about collection points. If the electronic devices would be disposed on landfill, dangerous substances may reach groundwater and subsequently food chain, where it could affect human health.
Distributed by:
iMagic INNOVATIONS
26950 San Bernardino Avenue, Redlands,
CA 92374
IMAGICLIVING.COM
Made in China
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction
FCC ID: 2AMI2-IM011711