Dongguan Caiyun Technology BJQ Bed Wetting Alarm Instruction Manual
- June 6, 2024
- Dongguan Caiyun Technology
Table of Contents
Bed Wetting Alarm
Thank you for purchasing our products. Please read this manual carefully before use and keep it properly for future reference.
Product Composition
The urine alarm consists of three parts:
Transmitter (urine detection): detect urine and send alarm information to
receiver by wireless way
Receiver: The receiver is used to receive the alarm information from the
transmitter and notify the vibration or sound. It has the function of
temperature and humidity detection and is used to detect the current ambient
temperature and humidity.
Charging box (storage box): used for charging transmitter and receiver.
When not charging, it is inconvenient for users to store and carry after being
covered.
Switch on / off
Turn the switch to the right to turn on the receiver, turn it to the left to turn off the receiver, and the transmitter will always turn on by default.
Receiver alarm mode setting
Vibration mode setting:
Click the left button, the screen displays the number 000 01, and a small
icon appears. Press the right button to confirm. The system automatically
returns to the main interface, and the setting ends
Sound mode setting:
Press the left button twice, the number 000002 will be displayed on the
screen, and a small icon will appear. Press the right button to confirm, and
the system will automatically return to the main interface, and the setting
will be finished
Vibration plus sound mode setting:
Press the left button three times, the number 000003 will be displayed on the
screen, and a small icon will appear. Press the right button to confirm, and
the system will automatically return to the main interface, and the setting
will be finished.
Temperature display mode
Fahrenheit display:
Press the left button four times, the number 000004 will be displayed on the
screen and a small Fahrenheit icon will appear. Press the right button to
confirm, and the system will automatically return to the main interface, and
the setting will be finished.
Celsius display:
Press the left button four times, the number 000004 will be displayed on the
screen, and a small icon of Celsius will appear. Press the right button to
confirm, and the system will automatically return to the main interface, and
the setting will be finished
Use of urine detection module
Open the button of the urine detection module, and buckle the detection module on underwear along the edge of the underwear.
Alarm prompt
When the system gives an alarm, a small icon appears. The alarm vibrates or sounds or vibrates +sounds according to the alarm mode set by the user. The user presses any key to cancel the alarm, and the alarm icon disappears and returns to normal.
Product charging
Put the receiver and transmitter into the charging box, and plug in a USB for charging until the receiver battery is fully charged. When the indicator light of the transmitter turns from red to green, the charging is finished.
Matters needing attention
- When using the receiver’s temperature and humidity function, the receiver shall not contact or be placed in a special environment such as a pocket, and the hole position of the temperature and humidity sensor shall not be blocked. The receiver’s temperature and humidity function are invalid during charging.
- The product is charged by standard DC5V
- After charging, the receiver can be turned off when the product is not in use to save power consumption.
Product introduction
Importance
It takes at least one week for parents to fully wake up their children after they fall asleep for about one to two hours. And the alarm will help wake up the children who sleep too well. By taking a nap during the day, make sure that the child will not be exhausted when sleeping at night, which will help the alarm to wake up the child. When you hear the alarm every night, remind your child to stop urinating and going to the toilet. Before going to bed at night, it is not necessary to limit children’s liquid intake.
Importance
In the first few weeks, when the alarm sounds, the child may not be woken up
by the alarm, so the child needs the help of parents: wake up the child and
let him go to the toilet.
The process of children’s participation is indispensable for their success.
Don’t unplug the alarm for your child. It’s better you’re your child to notice
that the alarm sounds and remove or disconnect the alarm by himself. Parents
need to help the child to go to the bathroom to discharge urine. In the first
one to two weeks, children may be completely wet in bed, but parents still
need to continue to emphasize the importance of going to the toilet and
encourage them. Ask the children if they remember the alarm and what they did
the next day.
Importance
Parents’ participation is also essential for the success of this program. In
the first few weeks, children need parents’ help and encouragement. This plan
may be slow and frustrating, but parents insist on using the alarm every
night, and the alarm can sound normally during every training course, so
parents should help to wake up their children. You need to continue using the
alarm for 3 to 4 weeks, and make sure that your child will not relapse after
the last alarm. Recurrence refers to a child’s continuous wet urine after one
or more months. If this happens, please start using the alarm again
immediately, so that the recurrence interval will become longer and longer.
Plan
After the alarm sounds, reconnect the alarm to the child and put on a new
pair of underwear. Use an all-night light in the child’s room, which will help
the child wake up more easily when the alarm sounds and find the way to the
bathroom. Be sure to praise your children every time they spend a dry night or
notice the alarm. It is also important not to scold children because they
don’t notice the alarm sound because it takes some time to change their
behavior. In addition, it is helpful to use the progress chart so that
children
can participate in the progress of the plan.
Maintenance/cleaning
Remember to clean the sensor clip after every wet part. If necessary, clean the alarm once and for all. Do not immerse the alarm body in water, because it will damage the internal parts, and the sensor clip can be washed in water. Always check the battery to ensure that the alarm is still working. This can be checked by inserting a damp cloth in the middle of the clip. When the alarm is not used for a long time, please take out the battery. The alarm of our company is designed for a single user. If you want another child to use the alarm, please contact to buy another alarm
Guarantee
The warranty period of the wearable alarm you purchased is 30 days for defects in materials and processes of the manufacturer, and the warranty period does not include damages caused by misuse or overuse. The functional shelf life is 6 months. In case of man-made damage, our company will charge for repair or replacement of components within the warranty period according to its discretion, and the components must be returned at the expense of customers. If the components are not purchased directly from our company, the customer shall provide proof of purchase, such as sales invoice receipt or invalid cheque.
Warning: After use, please open the transmitter clip and wipe
it with a dry paper towel before use
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>