Shenzhen Beixisi Industrial K1KF4NB103309 Type-C Wireless Microphone User Manual

Shenzhen Beixisi Industrial K1KF4NB103309 Type-C Wireless Microphone User

Manual

Introduction

Thanks for choosing our product.

This product is a smart wireless microphone that provides professional-grade recording output. Plug and play, no app required. Multiple uses: It can be used in online live broadcast, video Vlog shooting, program interview, recording, video teaching and other occasions.

The wireless Microphone consists of two parts, one is Microphone transmitter, the other one is Type-C receiver. (See as below picture)

ID Diagram

1. Windproof net
2. Microphone indicator
3. Microphone Type- charging port
4. Microphone clip
5. Switch key
6. Microphone reset key
7. Type-C port to connect phone
8. Receiver indicator
9. Reset key of receiver
10. Type-C port of receiver
11. Rope Hole

• The microphone is equipped with a built-in battery, which can be used only after being charged.

The power of Type-C receiver is supplied by phone ( (10) Type-C port is for phone charging)

How to use

Step 1: First, connect the receiver Type-C to the Type-C interface of the mobile phone, that is, the connection is successful.

Step 2: Press switch key of microphone, the indicator light turns green, and then power is turned on.

Step 3: The indicator red light of receiver keeps always on, then open the phone camera, live App or other Apps, and then to use the microphone to receive sound.

Special Note:
For the use of (10) Type-C port : there is no battery in Type-C receiver, and no need to recharge during live. If the phone is low power during Live, it can be recharged directly through (10) Type-C port.

About Ul

Microphone Transmitter

Type-C Receiver

Packing List

Content of packing

1. Microphone transmitter
2. Type-C receiver
3. Type-C charging cable
4. User manual

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>