OnHAND SBLK-SHSOH Snail Waterproof Wireless Speaker Instructions
- June 6, 2024
- OnHAND
Table of Contents
SNAIL WATERPROOF
WIRELESS SPEAKER
SPECIFICATIONS
Product Size: 81 x 50 x 70mm
Weight 92g
Loudspeaker: 40mm
Rated Power: 3W
Interface: Micro USB
Bluetooth® Specifications:
Operation Frequency 2.400GHz-2.480GHz
Power Output (Peak) Class 2/4 dbm
Receiving Sensitivity: -88db, @ 0 1% BER
Operating Range: Up to 10m
Battery Specifications:
Capacity: 600mA, 3.7V, Polymer Li-ion Battery
Music Playback Time. 3-4hours at 70% volume
Charging Standard: DC 5V, 500mA
Charging Time: 2-3 hours
Accessories:
USB Cable: 1pc
User Guide: 1pc
Speaker: 1pc
OPERATION
- Interface dust cover protects switch and Micro USB port
- Power switch: Switches the unit On/Off
- Micro USB: Charging port
- Press + Next song; Press and hold to increase volume
- Press – Previous song; Press and hold to decrease volume
- Press to Play/Pause under playback mode
- Press to Answer/Hang up during phone calls in Bluetooth® mode. Press and hold this button to disconnect the Bluetooth® connection
- Mic: Serves as microphone during hands-free calling
- Suction Cup: Capable of sticking to any smooth surface (glass, glossy areas, flat walls, ceramic, etc.)
- LED indicator Built-in battery indicator
Red light on: in charging mode
Blue light on: fully charged
Blue light flashing quickly: in Bluetooth® pairing mode
Blue light flashing slowly: Bluetooth® pairing successfully
USAGE
- Switch on the speaker
- Activate the connecting devices’ Bluetooth®
- Turn speaker to pairing model (blue light flashing quickly)
- Search “BT speaker” and pair
- Connect and play
NOTES
- Hands-free call is only available when in Bluetooth® connected status. Phone calls can be interfered with high frequency electromagnetism. People should not try to use this product in high frequency environments.
- Bluetooth® transmits bi-directionally, the transmitting distance is highly related to the audio player. Compatible Bluetooth® devices are recommended.
- Some players will not automatically switch during play function, in this case, a ‘pop’ noise may be heard between songs.
- When Bluetooth® transmitting devices cannot be connected, please delete the last Bluetooth® receiving devices name on the list. Re-activate the speaker, then try re-searching and re-pairing.
- Audio quality can be affected when the Bluetooth® transmitting devices have a poor signal or low battery capacity.
- Waterproof: Only the silicone gel housing is waterproof, do NOT expose the inner structure and components to water, liquid or dampness.
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement.