iJOY LGO-PRE-GWT Premium Wireless Headset User Guide

iJOY LGO-PRE-GWT Premium Wireless Headset

Model Number

1. LGO-PRE-STL
2. LGO-PRE-AVT
3. LGO-PRE-GLM
4. LGO-PRE-EDM
5. LGO-PRE-SRG
6. LGO-PRE-SUN
7. LGO-PRE-RED
8. LGO-PRE-RGD
9. LGO-PRE-JTB
10. LGO-PRE-SLV
11. LGO-PRE-GLD
12. LGO.PRE-WHT
13. LGO-PRE-GWT

Features and Specifications

• Driver: 40mm
• Impedance: 320
• Rated Power: 20mW
• Frequency Range: 20Hz-20KHz
• Sensitivity: 110dB+/-3dB
• S/N: ~75dB
• Power Supply: USB, DC 5V=1A
• Battery Capacity: 300mAh
• Battery Play Time: 10 hrs.
• Battery Charging Time: 1.5 hrs.
• Product Size: 182x180x78mm
• Product Weight: 200g

Package Contents

• Wireless Headset IJOY LOGO
• User Manual
• USB to Type-C charge cable
• 3.5mm aux-in cable with in-line microphone

Charging the Headset

Before using the headset for the first lime Charge for at least 2 hours.

• Plug the Type-C cable into the port on the headset.
• Plug the opposite, USB end into the USB port on a computer or compatible AC adapter.
• The red LED will turn on to indicate that the unit is charging.
• Once fully charged, the red LED will turn to blue.

Basic Instructions

• To turn the headset on, switch power button to the right direction.
• The headset will prompt and blue LED will turn on.
• The blue LED will flash every second while playing music in Bluetooth or TF mode.
• Support battery indication icon on IOS &Android.
• Maximum & minimum volume warning prompts.
• Low battery prompts with red LED flashing.
• To turn the headset off, switch power button to the left direction.

Pairing the Device

• Place headset within 30 ft from Bluetooth-enabled device.
• Follow the instructions of your device to search for the headset
• The headset is called “IJOY LOGO”. If a PIN is required, enter “0000”.
• The LED will turn to blue when pairing is complete.

LED Indicator

• Charging: Red LED on
• Fully Charged: Blue LED on
• Pairing Mode: Blue and red LED alternating flash
• Connected: Blue LED on
• Playing: Blue LED will flash every second

Safety Information

• If no pairing connection after the headset enters the pairing mode, please turn off the headset to save power.
• Do not perform other operations while pairing the headset to prevent the program error.
• Please select a proper volume while using to prevent damage to your ears.
• Please note that a good environment for using the headset can avoid damage to the headset.
• Please charge the headset after a long lime none-use.

Caution

• Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
• This device and its antenna must not be co-located or operate in conjunction with any other antenna or transmitter.

Headset Button Functions

• Short press for PLAY/ PAUSE/ Phone Answer/ Hang OFF and search FM while in FM mode.

• Short press twice to Redial last number.

• Hold on the button to Reject Phone Calls while ringing.

• Short press for Previous Track/ FM station.

• Hold on button for Volume Down.

• Short press for Next Track/ FM station.

• Hold on button for Volume Up,

• Short press to switch play mode(Bluetooth/ FM mode/ TF mode).

• Hold on the button to reset the headset into pairing state.

• Short press to select six kind of EQ experience.

• Switch to the right to turn the headset on and left will turn it off.

• Plug in an aux-in cable to the Aux plug in port to enjoy the music directly. All button functions will stop working under Aux mode.

• Put a TF card into the TF card slot to play music directly.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF Warning Statement

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>