AUXTRON G18 Bluetooth Gaming Earbuds User Manual
- June 6, 2024
- AUXTRON
Table of Contents
Bluetooth Gaming Earbuds
User Manual
NOTES!
- To make it safe, we strongly recommend you to read the manual and operate strictly according to the requirements
- Please use a standard charger to charge the earphone in case of causing battery damaged
- Repeat charging or discharging the earphone will cause battery performance reduction. It is normal for a rechargeable battery
- Please keep away from fire when using the earphone
- Please do not make the ports blocked, such as charging ports, LED and earphones, etc.
- Please don’t use the earphone at high volume or for a long time to avoid affecting the users hearing
- Please don’t disassemble the earphone for any reason in case of damaging the product
- Please don’t clean the earphone with oil or other corrosive cleaning agents.
- Please don’t use the earphone in potentially dangerous places.
G18Overview & Introduction
- Mufti-function button
- LED indicator
- Earphone charging ports
- Eartips
- Charging box display
- Charging case charge port
- Lanyard hole
ACCESSORIES
USB cable1 Bluetooth earphone 2
User manual 1
Charging case 1 Eartips2
QUICK PAIRING
First Step
Open the cover of the charging box, the earphone will turn on automatically,
the indicator light will flash. One of the earphone light will be off when
both earphones are paired successfully, and the other earphone light continues
to flash, waiting for connection with the mobile phone
Second Step
Turn on Bluetooth settings of mobile phone, click search, click “G18” to
connect successfully and the earphone indicator light is off. When the
earphone and mobile phone have been connected once,the earphone will connect
with the mobile phone automatically when its turn on
Touch Control
Charging Instruction
-
Earphone Charging
Put the earphone into the charging box properly, click it and close the charging box cover, the earphone starts charging with indicator long on and then off when it’s fully charged. -
Charging Case Charging
Open the charging box and the red atmosphere light is on. The display shows the current power which is represented by 0-100 digits, 0-9 low, and 100 full.
No earphones, close the cover, the blue atmosphere light is on, and turn off in about 10 seconds Put in the earphone and close the cover. The blue atmosphere light is on. When the earphone is fully charged, the atmosphere light is off When the charging box is charging. the blue atmosphere light flashes, the power becomes higher and the light will also light up slightly until it is on for a long time. The charging is completed when the display number is 100.
Specifications
Model No.: G18
Bluetooth Version: 5.1+EDR
Bluetooth Protocol: HFPIHSP/A2DPIAVRCP
Earphone battery: 40mA
Charging box battery: 400mA Music/Talking Time: > 5 hours
Standby Time: > 100 hours
Charging Time: 1 hour
Charging Times: Charging case charge earphones 4 times
Notes! The product parameters will be different depending on the model, use mode, environment, etc
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.