Lucky Group 18829 Wireless Dual Stereo Speaker Instructions

Lucky Group 18829 Wireless Dual Stereo Speaker

Dual speakers Using

Power on
Press and hold MFB for 3 seconds until blue LED flashes with a voice prompt “power on”

Power off
Press and hold MFB for 4 seconds until red LED flashes with a voice prompt “power off”.

Pairing

1. When the speakers are off, press and hold MFB on each speaker for 3 seconds to power them on. Both LED lights flash in blue and red alternatively.
2. When two in red and blue led flashes status, double click any speaker (double-click the speaker as Main speaker) , the indicator is still red, blue light alternately flashing. speakers
3. Please search  18829” on your smartphone Bluetooth list, and select it to pair with your smartphone

Note: Above is the first pairing operation, the same device will auto- connect when power on.

Music Play/Pause When listening to music, Short Press MFB to Play/Pause switch.

Note : Any speaker can operate by the above steps.

Note : The Main speaker support calling functi  During Bluetooth pairing, then double-click speaker which is the Main speaker)

Siri support

Note: iPhone needs to setting Siri.
AUX input
the main speaker through the audio cable to connect mobile phones, Ipad, notebooks, and other equipment

Using the single speaker

Any speaker, Long press MFB when the speaker off, entering pair-mode then red and blue lights flashes alternately

AUX input
Main speaker through the audio cable to connect mobile phones, Ipad, notebook,s and other equipment.

Charging
Charge the speaker through the charging cable, The green light is on when charging, full charge the indicator light off automatically.

Attention

1. For other Bluetooth operations, please refer to the above steps.
2. When two speakers have been paired, one of the speaker can control the other one..
3. Main speaker is a connection between second device and your mobile phone. It is normal status under high power consumption.
4. The speakers will power off without any connection 3 minutes.
5. If the speaker is connected with your smartphone without any playing it will power off in 30 minutes
6. iPhone will prompt the internal battery power in real-time.
7. When meet with error or any other issue, press and hold MFB on both speakers for 10 seconds to reset

Specification

• Model: 18829
• Bluetooth version: V5.0
• Power(PMS): 2*3W
• Speaker size:67.56489MM
• Dual speaker size:67.564178MM
• Holster size:7269198MM
• Power input: 5V; 500mA
• Speaker battery: 2*3.7 V/1000mAh
• Speaker charging time: About 2-3 hour
• Playing time: About 10 hour( Medium volume)
• Profile support: HFP/A2DP/AVRCP
• Frequency: 2.40GHz~2.48GHz
• Sensitivity: -92dBm
• Working temperature: -10~50°C
• Transmission Distance: 10 M( without obstacle)
• Weight: 446g (without holster) 546g (including holster)

What is in the box

• Speaker: 2pcs
• User Manual: 1pcs
• Micro USB cable: 1pcs
• EVA Carry Case(Optional): 1pcs

FCC compliance statement

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:

1.  this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

changes or modifications not expressly approved b the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>