IKEA 204.840.54 HILDEGUN Pot Holder Instruction Manual
- June 6, 2024
- Ikea
Table of Contents
IKEA 204.840.54 HILDEGUN Pot Holder
This potholder has been tested in accordance with EN ISO 21420: 2020, EN 407: 2020, Regulation (EU) 2016/425 and UK 2019 S1696 Schedule 35 Regulation 38.
Designation
Potholder for private use, Risk category II as per Regulation (EU) 2016/425 and UK 2019 S1696 Schedule 35 Regulation 38.
Use
The potholder is designed to be used for protection against thermal risks
(contact heat) associated with removing hot items off the hobs of the types
usually used in domestic environment.
The potholder is intended to be used in dry condition. Potholder should be
inspected prior to each use and damaged potholders should be replaced.
Size
Relevant applicable European standards
This potholder is designed to offer protection against contact heat, at
performance level 1, and complies with relevant requirements in EN ISO
21420: 2020 and EN 407: 2020.
- Limited flame spread: X
- Contact heat: 1
- Convective heat: X
- Radiant heat: X
- Small splashes of molten: X
- Large quantities of molten: X
- X is used for tests that where not tested.
Performance levels
Contact heat: performance level 1 (threshold time minimum 15 s when exposed to
a temperature of 100°C).
The potholder is not specifically designed to offer protection for burning
behavior, convective heat, and radiant heat, small splashes of molten metal,
and large quantities of molten metal. and large quantities of molten metal.
Limitations
This potholder is designed to offer palm protection only.
Only suitable for taking hot items off the hob.
Keep away from naked flame and fire.
number of cleaning cycles
The acceptable number of cleaning cycles following the provided care
instructions: 5.
The stated acceptable number of cleaning cycles is not the only factor related
to the lifetime of the product.
The lifetime also depends on usage, care, storage, etc.
Notified body
- EU: INTERTEK ITALIA SPA
- Via Guido Miglioli, 2/A – 20063 Cernusco sul
- Naviglio (MI) – Italia (2575)
- Approved body
- UK: ITS Testing Services (UK) Ltd, Centre Court,
- Meridian Business Park, Leicester, LE19 1WD,
Approved Body no AB0362.
UK: ITS Testing Services (UK) Ltd, Centre Court,
Meridian Business Park, Leicester, LE19 1WD,
Approved Body no AB0362.
To view the Declaration of Conformity for this product go to IKEA.com, search
your article number and find the document under “Assembly & documents”.