Design Within Reach JWDA Table Lamp Instruction Manual
- June 12, 2024
- Design Within Reach
Table of Contents
Design Within Reach JWDA Table Lamp
Congratulations on your new JWDA Lamp designed by Jonas Wagell. We hope you will enjoy using this lamp and follow these instructions to ensure correct installation.
Component overview
- One JWDA Concrete Table Lamp lamp with a 2-meter textile cord, dimmer, and G9 socket or
- One JWDA Metallic Table Lamp lamp with a 2-meter textile cord, dimmer, and G9 socket or
- One JWDA Marble Table Lamp lamp with a 2-meter textile cord, dimmer, and G9 socket or
- One JWDA Metallic Pendant Lamp lamp with 4 meter PVC cord and wire, dimmer, and G9 socket.
Care Instructions
To clean simply wipe with a soft dry cloth. Turn off the power before cleaning. Do not use any cleaners with chemicals, solvents, or harsh abrasives. These instructions are provided for your safety. It is important that the instructions are read carefully and completely before assembling.
JWDA Metallic Lamp
This Menu A/S product is made of solid polished brass. Solid Brass is a natural material that will oxidize from the moment it is exposed to air. Therefore, you may discover that upon unpacking the lamp the brass base has already darkened. Oxidation is part of the lamp’s characteristics, however- er if you would like to maintain the shiny appearance, care instructions are below. To keep the polished look- use a mild metal polish and a soft cloth, avoid using water. Polishing creams and/or polishing clothes can be bought in most retail stores.
JWDA Lamp:
Max 220V and 40W bulb, G9 socket. (3.4 W LED Bulb, Matt included) This product
contains a light source of energy efficiency class
BE SURE THE ELECTRICITY TO THE WIRES YOU ARE WORKING ON IS SHUT OFF; EITHER
THE FUSE IS REMOVED OR THE CIRCUIT BREAKER IS TURNED OFF.
Please check the specific rules for electrical installation work in your
country. Some countries may
IMPORTANT
If you have any problems regarding the electrical installation, contact a
certified electrician. Always shut off power to the circuit before starting
installation work. Always use 40W G9 bulbs. The external flexible cable or
cord of this luminaire cannot be replaced. If the cord is damaged, the
luminaire shall be destroyed.
INSTALLATION
Correct Disposal of this product
This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your device, please use the return and collection system or contact the retailer where the product was purchased. They can take this product to environmentally safe recycling.