Shen Zhen Ya Mei Shu Ma Dian Zi You Xian Gong Si K6 SmartBand User Manual

Ya Mei Shu Ma Dian Zi You Xian Gong Si K6 SmartBand
User Manual

Thank you for choosing this product, please read the operation manual carefully before use.

Setting

Use ” VeryFit “, on iOSor Android smartphone to set the wristband as follows: Note: hardware and system of devices should meet the requirements:
Product activation and installation
The product must be activated by charging before initial use and then charging the product to ensure a normal power supply. The hand ring will automatically power on. Take out: Pull open the strap and take out the bracelet body

Charge the battery: Insert the chip-mounted end of the bracelet body into the USB interface to activate the product by charging (be cautious not to reverse the polarity, and comply with the required voltage and current:5V / 500mA)
Installation: Mount the bracelet body into the slot of the wrist strap.

Touch key

Single-click the touch key: Interface switch Press and hold the touch key: Enter

Download Very Fit Search and download
Search and download” VeryFit ” from the Apple Store or Android App store.
Scan the QR code and download It probably has a problem to open the link with WeChat or other scan tools, please copy the link and open it through the browser.

https://www.idoocloud.com/q/Veryfit.html

Connect the Smart Bracelet

Make sure the Bluetooth of the Smartphone is ON

Open APP “Very Fit”, Choose the binding bracelet

Search bracelet Bluetooth

Note: When selecting the right band from the search list, please slide the screen of the wristband to wake up the device and then complete connecting.

Features

Time menu
You can change the watch face via the app: Device > More. [Press the touch button] to go to the next menu: Data menu.

Data menu
[Press the touch button] to go to the next menu: Heart rate menu. [Long press the touch button for 2 seconds] to enter the submenu of the Data menu.

[Press the touch button] to go to the next submenu. Note: To return to the Data menu, long-press the touch button when in the submenu of the Data menu.

Heart rate menu

Measuring heart rate…| Data detected| No data detected

Heart rate measurement
To manually measure your heart rate more accurately, wear the device on the upper part of your wrist; wear it tighter during exercise.

Heart rate monitoring throughout the day
This feature is enabled by default, heart rate will be automatically monitored throughout the day.
Note: Heart rate is measured 1 second after the Heart rate menu is entered. “ is displayed before a heart rate data is detected; when the measurement is done, heart rate data is displayed.
[Press the touch button] to go to the next menu: Exercise menu.

Exercise menu

[Long press the touch button for 2 seconds] to enter the submenu of the Exercise menu. [Press the touch button] to go to the next submenu of the Exercise menu. Note: You can select the exercise types displayed on the band via the app (including 3 exercises that can be recorded and 11 other activities).
Start an exercise
An exercise is started after the 3-2-1-GO countdown.

In exercise mode

[Press the touch button] to go to the next submenu. [Long press the touch button for 2 seconds] to exit the exercise mode.
Note: To display riding speed and distance, you need to pair the device with the app, and tap “Start” on the app when you start riding.

Pause an exercise
[Long press the touch button for 2 seconds] to exit the exercise mode.
Note: This feature is available only when the exercise is started from the app. For an exercise started from the app, you can pause, start or exit it on the app, while you can only exit it using the band.
Exit an exercise

1. 1f an exercise lasts for less than 1 minute, a reminder asking you not to save the data will be shown.
   [Press the touch button] to go to the Exercise menu. (The exercise data will not be recorded)

2. 1f an exercise lasts for longer than 1 minute, an “end of exercise” reminder will be shown.
   [Press the touch button] to display the exercise data.

|
---|---

Data display when an exercise ends
[Press the touch button] to view the next data page; tong press the touch button to return to the first submenu of the Exercise menu.

Event reminders in exercise mode
Exercise exits when no movement is detected.
[Press the touch button] to exit the reminder and return to exercise mode.

Notes:

1. If no movement is detected in 15 minutes, a reminder will be shown 15 seconds before the exercise is ended automatically.
2. If movement is detected during the 15-second countdown, the remainder will be exited. (3)If still no movement is detected during the 15-second countdown, the exercise mode will be exited.

Exercise is compulsorily exited when memory is full
[Press the touch button] to exit the exercise.
Note: When the band’s memory is full, the user will be reminded to exit the exercise mode.

Exercise is compulsorily exited when the battery is low.
[Press the touch button] to exit the exercise.
Note: During an exercise, when the battery is low, the exercise will be paused and the user will be reminded to exit the exercise mode.

Cannot start an exercise when the battery is low
[Press the touch button] to exit the exercise mode. Note: This reminder will pop up when a user tries to start an exercise in case the battery is low.

Abnormal operation during an exercise
[Press the touch button] to exit the reminder. Note: For an exercise started from the app, this reminder will pop up when the Bluetooth connection between the band and the app is disconnected.

A reminder will pop up.

Stopwatch menu
[Long press the touch button for 2 seconds] to enter the Stopwatch menu.

Start the stopwatch
Press the touch button] to start counting time.
[Long press the touch button for 2 seconds] to return to the Stopwatch menu.

Pause the stopwatch
[Press the touch button] to pause.
[Long press the touch button for 2 seconds] to return to the Stopwatch menu.

Restart the stopwatch
[Press the touch button] to continue counting time.
[Long press the touch button for 2 seconds] to return to the Stopwatch menu.

Alarm menu

[Press the touch button] to return the Time menu.
[Long press the touch button for 2 seconds] to turn on/off the alarm. Note: Relevant setting needs to be finished on the app.

Reminder menu

Call reminder

[Press the touch button] to exit the reminder and answer the call. [Long press the touch button for 2 seconds] to hang up.
Note: Call reminder has to be turned on on the app.

Message reminder

On the Message interface, 1 press the touch button to read the whole message.
Note: Relevant setting needs to be finished on the app.

Alarm reminder

Note: Relevant setting needs to be finished on the app.

Hydration reminder

[Press the touch button] to turn off the reminder.
Note: Relevant setting needs to be finished on the app.

Reminder to move around [Press the touch button] to turn off the reminder.
Note: Relevant setting needs to be finished on the app.

Goal achieved reminder When a goal is achieved, the band will vibrate and a goal achieved reminder will be displayed. [Press the touch button] to turn off the reminder.

Low battery reminder
[Press the touch button] to turn off the reminder.

Ultra-low battery reminder
The screen will stay on this interface, and the user cannot enter other modes.

Device error reminder

• 07 indicates an error of acceleration sensor
• 2 -02 indicates an error of heart rate sensor
• 03 indicates an error of touch button IC
• 04 indicates an error of flashlight

Note: When a device error is detected/ the error will be displayed on the corresponding interface every time the device is turned on.

Technical data

Model No.: K6
Battery capacity: 90 mAh Charging time: 2h
IP rating: IP68
Operating temperature: 0-60 °c
Frequency range: 2402-2480 MHz
Screen type: 0.96″ color screen Charging voltage: 5V+0.2V Standby time: 6 days
Weight:
Bluetooth version: BLE 4.2
Max. transmission power consumption: 0dBm

Care and maintenance

Three suggestions for use and maintenance:

1. Keep the product clean.
2. Keep the product dry.
3. Do not wear the product too tight.

• Do not use household cleaners when cleaning the product. Use soap-free cleansers instead.
• For stubborn st ains1 it is recommended to remove by scrubbing with alcohol.

Waterproof: Not suitable for use while diving1 swimming in the sea 1 or in a sauna. Suitable for use in swimming pools1 showers (cold water) and shallows.

Safety instructions

• Do not place the product and its accessories at extreme temperatures 1 otherwise it may cause hazards such as product failure 1 fire or explosion.
• Protect the product from strong impacts or jolts/ so as not to damage the product and its accessories 1 thus avoiding product failures.
• Do not disassemble or modify the product and its accessories by yourself. Contact us for after-sales service when the product fails.

FAQs

Why can’t I find the device when pairing?

1. Ensure that your smartphone’s Bluetooth is turned on1 and the operating system of your phone is Android 6.0 or ab ove1 or iOS 9.0 or above.

2. Ensure that the distance between your phone and the device is less than 0.5 meters when pairing.
   After pairing is completed 1 ensure that the device is within normal Bluetooth communication distance (within 7 meters).

3. Ensure that the device has sufficient power. Please contact us1 if the problem remains after the device is fully charged.

Why do I fail to connect to Bluetooth occasionally?

1. Restart the band’s Bluetooth.
2. Restart your phone or your phone’s Bluetooth.

How to restore to factory settings?
Ensure that the device is paired with your phone. Turn on app1 select “Delete device” in “Device settings”.

The device meets the EU ROHS criterion. Please refer to IEC 62321/ EU ROHS Directive 2011 /65/EU and revised directive.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could avoid the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for

CAUTION +
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS

Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The disposal at the communal collecting point via private persons is for free. The owner of old appliances is responsible to bring the appliances to these collecting points or to similar collection points.  With this little personal effort, you contribute to recycling valuable raw materials and the treatment of toxic substances.

If you experience discomfort or skin irritation when wearing your smartwatch, then we recommend you try cleaning your device. Sometimes residue or foreign materials build up around your device and may aggravate your skin. It’s also possible that you are not wearing the watch correctly. We recommend making sure to clean and adjust your watch regularly for a more comfortable fit.
Caution:

• If you experience skin irritation when wearing your watch, please refrain from wearing, it and wait two to three days to see if your symptoms ease. If symptoms persist or worsen, please consult a physician.
• If you have eczema, allergies, or asthma, you may be more likely to experience skin irritation or allergy from a wearable device.

CAUTION

• Risk of explosion if the battery is replaced by an incorrect type
• disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;
• leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas;
• a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.

https://www.idoocloud.com/manual/lang.html?d=GTBand
Scan the QR code for more function information
FCC ID: 2AT6I-K6

Made in china

Documents / Resources

| Shen Zhen Ya Mei Shu Ma Dian Zi You Xian Gong Si K6 SmartBand [pdf] User Manual
K6, 2AT6I-K6, 2AT6IK6, K6 SmartBand, SmartBand
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>