ZEDURE ZDWCSW5 Super Wave Duo Fast Wireless Charger User Manual
- June 6, 2024
- ZEDURE
Table of Contents
SuperWave Duo
Fast Wireless Charger
USER MANUAL
Product Overview
(The maximum output power of each wireless charging center is 10W)
- Wireless Charging Center 1
- Wireless Charging Center 2
- LED Indicator
- USB-C Output
- USB-C Input
- USB-A Output
Using Instructions
-
Connect to a power outlet via USB-C input
-
Put your wireless charging devices on the right point
-
Charge more devices via USB-A output
LED Indicator Status
Charging
Foreign Object Detection
Don’t
Caution
Use original or certified cables, chargers
Storage in a cool and dry place. Recommend storage temperature: -10℃ to 50℃; Operating temperature: 0℃ to 35℃.
Do not expose to moisture or submerge it in liquid.
Do not disassemble or attempt to re-purpose or modify it in any manner.
Stop using and contact the manufacturer if the product is excessively hot, is emitting odor, is deformed or has any other abnormalities.
Do not clean with harmful chemicals or detergents.
Avoid drops, bumps, friction, and other actions that can easily damage the product.
Avoid strenuous vibration, impact, extrusion on transportation, and keep the product away from intense sunlight and rain.
Keep it away from children under 3 years old for safety.
Please dispose of discarded products properly according to local regulations.
Specifications
| Model | ZDWCSW5 |
|---|---|
| Input | 5V/3A, 9V/3A |
| Output | Wireless 10W Max USB-C + USB-A 5V/2A Max |
| Total Output | 20W Max |
| Dimensions | 6.97 x 3.42 x 0.49inch 177 x 87 x 12.5mm |
| Weight | 10.3oz / 292g |
| Operating Temperature | 32°F to 95°F / 0°C to 35°C |
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:(1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF exposure statement:
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. During the operation of the device, a distance of 15
cm surrounding the device and 20 cm above the top surface of the device must
be respected.
IC Caution:
Radio Standards Specification RSS-Gen, issue 5
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science, and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions:
This device may not cause interference.
This device must accept any interference, including interference that may
cause undesired operation of the device.
RF exposure statement:
The equipment complies with the IC Radiation exposure limit set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator and your body.
Zendure USA Inc.
Phone: 800-219-0960 (US)
Office Hours: Mon – Fri 9:00 – 17:00 PST
Support / Contact: www.zendure.com/support
Website: www.zendure.com
FCC ID: 2AZ26-ZDWCSW5
IC ID: 23216-ZDWCSW5
® and @ 2021 Zendure USA Inc. All Rights Reserved.
Printed on recycled materials. MADE IN CHINA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>