REI ORION-HX Deluxe Non Linear Junction Detector User Guide
- June 6, 2024
- REI
Table of Contents
REI ORION-HX Deluxe Non Linear Junction Detector
Quick Start Guide
This card is intended to familiarize the user with some of the basic ORION HX
functions and capabilities. Minimal explanation is provided. Detailed
explanations of ORION HX functions and procedures are provided in the User’s
Manual.
To Test with 2nd or 3rd Harmonic Test Tag:
- Press the Power Button at the top left of the Touchscreen Display to power on the unit.
- From the Home Screen, press the Bar Graph Icon to access the Bar Graph Screen.
- On the Bar Graph Screen, repeatedly tap the top half of the Power Level indicator (the green bar) to increase transmit power to 100%
- Press the Power Button again to select Manual Transmit Mode. The Auto Transmit Mode indicator will disappear from beside the Power Level indicator.
- Hold the ORION HX head just above the provided 2nd Harmonic Test Tag. The LED inside the enclosed test tag will light verifying that the ORION HX is transmitting. Notice the bar graphs are maxed out.
- Press the Power Button again to select Auto Transmit Mode. The Auto Transmit Mode indicator will reappear.
- Hold the ORION HX head just above the 2nd or 3rd Harmonic Test Tag. After settling, the bar graphs and display will indicate either a “semiconductor” or “corrosive” junction.
ORION HX Display Screens
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>