REI HD6-1200 Digital Video Recorder User Manual

: June 1, 2024
: REI

Table of Contents

REI HD6-1200 Digital Video Recorder
Product Information
Product Usage Instructions
Guarantee & Warnings
PRODUCT CHARACTERISTICS
- DIMENSION
FREQUENTLY ASKED QUESTIONS
FCC Statement
Read User Manual Online (PDF format)
Download This Manual (PDF format)

REI HD6-1200 Digital Video Recorder

Product Information

Specifications

Function Overview: GPS information, alarm, license plate, speed, date/time
System: OS Control Mode
Input: WIFI IPC, Ethernet (Back), Ethernet port (Front), GPS, Hard disk + SD card, USB, SD, SIM, Sensor Panic, RS232, RS485, J1939, AUX, ESATA
Output: 802.11b/g/n (2.4GHz and 5.8GHz), 4 x10/100 M RJ45 ports, 1 x10/100M RJ45 port (Connect to PC for testing)
Video: H.264 /H.265
Audio: ADPCM
Video Signal Standard: Input Output Audio Signal Standard Display Split OSD Operation Interface Video/Audio Compression
Recording: Boot up/Schedule/Alarm
Image Resolution: PAL: 1080P, 720P, WD1(928X576), WHD1(928X288), WCIF(464X288), D1(704X576), HD1(704×288), CIF(352×288); NTSC: 1080P, 720P, WD1(928X480), WHD1(928X240), WCIF(464 x240)D1(704 x480)HD1(704 x240) CIF(352 x240)
Image Quality: Digital: 3MP(2048 X 1536), 4MP(2560 X 1440), 5MP(2560 X 1920), 1080P(1920X1080), 720P(1280X720) – 1-8 levels adjustable (1 is the best)
Playback: Single/Multi-channel playback
Network Locating: Date/time, channel, event
Storage Interface: 1 x HDD + 1 x SD card, 2 x USB2.0 (Type A) + 1 x USB2.0 (Type B), 1 x SD slot, 1 x SIM slot
Power: 8 inputs, 2 outputs, 1 x Panic, 1 x Extend GPS interface, 1 x ACC, 2 x CAN, 2 x DC12V/1A Output, 1 x EXT HDD DC8-36V
Physical Characteristic: Dimension
Environment: Temperature Operating Relative Humidity

Product Usage Instructions

Installation and Setup

Ensure the equipment is installed in accordance with the requirements provided in the manual.
Handle the equipment carefully during installation to prevent damage.
Use accessories recommended by the manufacturer for proper functioning.

Basic Operation

Connect the DVR to power and peripherals following the provided instructions.
Familiarize yourself with the control interface and settings.
Make necessary configurations for recording and playback as per your requirements.

Maintenance and Care

Regularly check and maintain the equipment as recommended by qualified technicians.
Keep the equipment in a cool and dry place away from direct sunlight and other harmful substances.

Frequently Asked Questions (FAQ)

Q: Can I use third-party accessories with the DVR?
A: It is recommended to use accessories provided by the manufacturer to ensure compatibility and optimal performance.
Q: How can I adjust the image quality during recording?
A: The image quality can be adjusted through the settings menu on the DVR. Refer to the user manual for detailed instructions.

User Manual For Digital Video Recorder
(Model HD6-1200 and HD6-1200W)

Notice

The information in this manual was current when published. The manufacturer reserves the right to revise and improve its products. All specifications are therefore subject to change without any notice.
The purpose of this manual is to kindly aid the user for the operation for our Digital Video Recorder (Hereinafter referred to as DVR). The user should have a basic understanding of computer operation and basic knowledge of how to connect peripherals and make some settings.

Guarantee & Warnings

Electrical Apparatus Safety
This DVR equipment has been tested and found to comply with the limits pursuant to title 47 part 15 subpart E of the FCC rules. All installation and operation should comply with local electrical safety norms.
Transportation
In the process of transportation, storage and installation, please avoid heavy stress, violent vibration, impact and water splashing.
Installation
Install the equipment in accordance with the requirements, handle carefully. Do not heavily press the equipment before the equipment installation is finished.
Requirements on Engineers & Technicians
All the work of checking and maintenance should be done by qualified technicians and engineers. We do not undertake any responsibility caused by unauthorized modifications.
Requirements on Environment
The equipment should be installed and stored in a cool and dry place, away from direct sunlight, flammable or explosive substances, etc. Keep gaps not less than 3cm around the equipment to facilitate ventilation for cooling.
Accessories
- Make sure to use accessories from the manufacturer recommended in the attachment.
- Insulate circuit ground and metal shell for all the peripherals.
- Before installation, please open the package and ensure that all parts are included.
- If there are any problems, please contact us as soon as possible.

PRODUCT CHARACTERISTICS

OVERVIEW
- HD6-1200/HD6-1200W is developed from the brand new platform N9M, which is an advanced and function-extensive Mobile Digital Video Recorder specially designed for network high definition, analog audio & video input and excellent extension. It uses high-speed processor and embedded operating system, patented file system 5.0 to ensure the safety and integration of important data, combining with H.264/H.265 video compression/ decompression technology, network technology and GPS locating technology.
- It can implement AHD 1080P and 720P high definition, IP camera 5MP, 4MP, 1080P and 720P high definition, WD1, WHD1, WCIF, D1, HD1, CIF video recording and vehicle driving information recording, as well as wireless data upload. With video center software it also achieves alarm linkage central monitoring, remote management and playback analysis. It is powerful with modular design, flexible installation, easy maintenance and high reliability.
SPECIFICATIONS

Function Overview| Preview, Recording, Playback, Network transmission, Locating
---|---
System| OS| Linux
Control Mode| Easy Check, Network, Mouse, web browser
Video| Input| 8 channels AHD+ 4 channel IPC
Output| 1 channel (RCA)
Total Resource|

PAL: 8720P@25FPS (AHD) +41080P@30FPS (IPC) Or 81080P@12FPS (AHD) +41080P@30FPS (IPC) NTSC: 8720P@30FPS (AHD)+41080P@30FPS (IPC)
Or 81080P@15FPS (AHD)+41080P@30FPS (IPC)

PAL:
1080P, 720P, WD1(928X576), WHD1(928X288), WCIF(464X288), D1(704X576), HD1(704×288), CIF(352×288);
NTSC:
1080P, 720P, WD1(928X480), WHD1(928X240), WCIF(464 x240)，D1(704 x480)，HD1(704 x240)， CIF(352 x240)

| | Digital:

3MP(2048 X 1536),
4MP(2560 X 1440),
5MP(2560 X 1920),
1080P(1920X1080),
720P(1280X720)

---|---|---
Image Quality| 1-8 levels adjustable (1 is the best)
Recording Mode| Boot up/Schedule/Alarm
Pre- recording| 0-5 minutes
Post-recording| 0-30 minutes
Mirror/Dual Recording| Support
Playback| Playback Channel| Single/Multi-channel playback
Search Mode| Date/time, channel, event
Network| WIFI| 802.11b/g/n (2.4GHz and 5.8GHz)
IPC Ethernet (Back)| 4 x10/100 M RJ45 ports
Ethernet port (Front)| 1 x10/100M RJ45 port(Connect to PC for testing)
Locating| GPS| Location tracking, speed detection and time sync
Storage| Hard disk + SD card| 1 x HDD + 1 x SD card
Interface| USB| 2 x USB2.0 (Type A) + 1 x USB2.0 (Type B)
SD| 1 x SD slot
SIM| 1 x SIM slot
Sensor| 8 inputs, 2 outputs
Panic| 1 x Panic
RS232| 1 x Extend GPS interface
RS485| 1 x ACC
J1939| 2 x CAN
AUX| 2 x DC12V/1A Output
ESATA| 1 x EXT HDD
Power| Input| DC8-36V
Max Power Consumption| 116W
Standby Power Consumption| ≈0W
Physical Characteristic| Dimension

(L × W × H)(mm)

DIMENSION

Unit : mm

PANEL INTERFACE

Front panel

$REI-HD6-1200-Digital-Video-Recorder- $2$$

Serial No.

|

Print

|

Description

---|---|---
1| AUDIO| Audio out
2| VIDEO| Video out
3| PWR| Power LED
4| HTR| Heater LED
5| REC| Recording LED
6| FLT| Fault LED
7| ALM| Alarm LED
8| VLOSS| Video loss LED
9| USB| 2 x USB 2.0
10| RJ45| 1 x 10/100/1000M RJ45
11| WAKE| Wake Button

Rear panel:

$REI-HD6-1200-Digital-Video-Recorder- $3$$

Serial No.	Print	Description
1	Power	DC8-36V power input
2	CAM9-12	IP Camera input 9~12
3	USB	USB2.0 port (Type B/ to connect fire proof box)
4	EXT HDD	ESATA Connector
5	CAMERAS	AHD A/V input 1~8
6	WIFI	WIFI 1-2 antenna port (2.4GHz & 5.8GHz)
7	GPS	GPS antenna port
8	INPUT	Sensor input
9	J1939	2 x CAN Ports
10	AUX	2 x DC12V/1A Out Ports
11	PANIC	1 x Panic Port
12	ACC	1 x ACC Port
13	GPS	1 x Extended GPS Port

FREQUENTLY ASKED QUESTIONS

The system can’t start?
Usually this problem results from the incorrect power connection. Please follow below steps to check the power connection:
Check the input power, whether the power wire is connected correctly, whether the ground wire is connected back to the battery, and whether the fuse on the power wire is in good condition.
Check whether the ACC signal wire input to the power is with voltage higher than 7 V.
Check whether the equipment key is closed.
The DVR restarts uninterruptedly?
Please follow below steps to check it:
Check whether the voltage of DVR equipment is insufficient. If the voltage is less than the start-up voltage of the equipment, the equipment would always restart.
The problem in hard disk/SD card may cause the failure to start. Take off the storage part and check whether it is broken down.
The DVR can’t record?
Usually, this problem results from the storage disk or camera. Please follow below steps to check it:
Check whether the storage disk is installed, whether it is in good contact, and whether the disk can be read normally in computer.
Check whether the storage disk is formatted. The storage disk should be formatted before normally storing record files.
Check whether there is video signal input into the equipment from camera, and whether there is video/image on the screen.
There is no voice in record file?
Please follow below steps to check it:
Check whether there is an external pickup, or whether the camera features with the function of audio collection.
Access to Video Channel Settings, check if Audio is set on.
There must be video input into the channel for recording and it must record normally.
The GPS works abnormally?
Please follow below steps to check it:
Check whether the GPS antenna is installed correctly. There is a silk print logo on the GPS antenna holder behind the host equipment.
Check whether the antenna receiver is sheltered. It should not be covered by any stuff, which may cause it not to receive signals.
Environmental influence such as tree shades, being inside tunnel, driving near tall building or elevated roads, thunderstorms or other weather influence, etc. can also cause signal loss or receiving wrong signals.
The DVR can’t shutdown in ignition switch mode?
- Please follow below steps to check it:
- Check if the ACC line connection mode is correct; and check whether there is voltage on ACC yellow line when the key is turned off.
- If the equipment has been set with schedule recording, it can’t shutdown if it is still during recording time of the task table.
How to install the WIFI antenna?
The antenna must be installed on unobstructed place of the roof, and be fixed with glue.
The DVR cannot be shut down when in ignition ON/OFF mode.
Check if the ACC signal wiring is correct and if there is voltage for ACC signal line after the key is turned off .
If you have set timing recording, and at the current time it is still in task recording, the equipment may be impossible to be shut down.
GPS anomaly.
- Check if the GPS antenna is properly installed. There is silkscreen GPS identification on the GPS antenna pedestal on the back of the DVR equipment. Check if the antenna connector is blocked and make sure the antenna connector not be covered by other things.
- Trees block, being inside the tunnel, driving near tall buildings or viaduct, thunderstorms and other environmental effects may also cause to receive no GPS signal or error signal.
No voice in video files.
- See if there is an external microphone, or if the camera cannot capture audio;
- Enter into the video channel settings, then check if the audio is open;
- Ensure video input and normal recording, on which the audio recording channels must be based.
The DVR doesn’t record.
- Make sure the storage part is installed and of fine contact, the data can be read on PC, and the storage equipment is not formatted.
- Check if there are video signal input to the main equipment, and whether there are video images in the channel pictures.
Why has the DVR always been in a state of restart?
- Check whether the DVR equipment voltage is insufficient. If the equipment voltage does not reach the start voltage, the equipment will restart.
- Hard disk or SD card may cause the DVR equipment unable to start. You need to remove the storage equipment and then boot up to verify whether it is caused by the storage equipment.
Why the DVR cannot start?
- Check the equipment input power to see if the power wiring is correct, if there is ground wire connected back to the battery, and if the fuse of the power wire is in good condition;
- Check whether there is voltage(more than 7V) on power input ACC signal wire;
- Check whether the hard disk key is turned off.
What is the log in user name and password for new DVR?
The default user name and password are both “admin”. The equipment password can be set as empty.
In the ON/OFF of basic settings, the low voltage protection is 8V, why?
After testing, when the battery is lower than 8V, the voltage will lower down quickly. Therefore the lowest voltage is set to be 8V. When it is lower than 8V, the DVR equipment will recognize it as external power-off and then enter into shutdown state.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital equipment, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help

This equipment complies with part 15 of the FCC rules.
Operation is subject to the following two conditions

this equipment may not cause harmful interference, and
This equipment must accept any interference received, including interference that may cause undesired operation.

RF Exposure Statement
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance of 20cm the radiator your body. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.