Cyboris KT-SCO2 Multi-Function Wireless Charger Socket Instructions
- June 6, 2024
- Cyboris
Table of Contents
Multi-Function Wireless Charger Socket
Instructions
PRODUCT FANCTION
PRODUCT PARAMETERS
Products model : KT-SCO2
Products name : Multi-function wireless charger socket
Input: 100-240V∼ 50/60Hz
Max Power : 2500W
Max current : 10A
Wireless output : 5W/7.5W/10W/15W
Products dimension : 170 × 170mm
Type C output : 5V/9V/12V/15V 3A/20V 2.25A
USB output : single usb, 5V 3.6A/9V 2.5A/12V 2.25A double usb,5V 4.8A
Charging distance : 4-9mm
PRODUCT CHARACTERISTICS
ANTI-ELECTRIC SHOCK,
MULTIPLE ANTI-ELECTRIC SHOCK SAFETY DESIGN
Jack design, structural design of impact-resistant housing, enhanced safety
mating distance Multiple safety design such as design can effectively prevent
electric shock accidents;
PREVENT FROM BURNING,
REDUCE THE FIRE HIDDEN DANGE R
Internal and external plastic parts are all flame-retardant engineering
plastic, reduce fire hazards;
PLUG-IN RESISTANCE
NORMAL MATING AND DURABLE WITHOUT LOOSENING
High-quality copper sheet with insert sleeve meshing technology, strong
elasticity, proper meshing and less heat generation Normal mating is durable
and does not loosen.
PRECAUTIONS
Keep the product dry. Rain, humidity, and various water and possibly minerals
can corrode circuits. If the device is wet, dry the device as soon as
possible, you can wipe it with a clean soft cloth
Do not attempt to charge the device when the product case is damaged, do not
use it incorrectly Charger to power the product
Do not try to open the product, unauthorized removal will damage the product
Do not throw, knock, or hit the device, as this will damage the internal
circuits and mechanical structure
WIRELESS CHARGING
Instant charging and charging frequency is stable, fast charging with mobile phone case is not affected at all
FCC Statement
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions: 1) this device may not cause harmful
interference, and 2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. Radiation
Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter. During the operation of
device a distance of 15 cm surrounding the device and 20 cm above the top
surface of the device must be respected.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>