msl SGTP-H2S Single Gas Detector User Guide
- June 6, 2024
- msl
Table of Contents
msl SGTP-H2S Single Gas Detector
NOTE:
SGTP-CO and SGPT-H2S are portable single gas detectors designed to detect the presence of carbon monoxide (CO) and hydrogen sulphide (H2S) in the ambient environment.
Activation & Deactivation of the detector
In a safe environment, when pressing and holding the button for 3 seconds, gas
type and firmware version (ex. v2.2) will be displayed. For 10 seconds
countdown, the device will be stabilized. After stabilization is completed,
“V” icon will appear on the display screen and the device will move to
Measuring mode.
To deactivate the device, pleas press and hold the button for three seconds.
Operating temperature, protection of the device, information about batteries
- Operating temperature: from -40 to 50 °C
- Protection: IP67
- Batterie type: manufacturer: Vitzrocell
- Ref. : SB-AA02(P)
- Type: lithium battery
- Voltage: 3.6 V
- Capacity : 1.2 Ah
WARNING:
These operating instructions describe the basic operation of the unit.
Please refer to the operating instructions available at
www.sauermangroup.com for safe use of the
product and detailed information.
Distributed by Sauermann / Distribué par Sauermann
ZA Bernard Moulinet – Rue Koufra 24700 Montpon Ménestérol – France T: +33 (0)5
53 80 85 00
www.sauermanngroup.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>