Shenzhen Tongyinhai Precision Electronics Huizhou Branch TYH-50086 Magnetic Wireless Charger Instruction Manual
Table of Contents
Instruction Manual
User Guide
Super slim wireless chargerA7
Parameter
| Product name | Magentic wireless charger A7 |
|---|---|
| Compatible device | Mobile phone/earphones that support wireless charging |
| Input | 5V/3A 9V/2A 12V/1.5A |
| Output | 7.5W/10W/15W |
| Color | Black / White |
| Product size | 20cm |
| Product weight | about 40 g |
| Charging distance | .8mm |
| Conversion rate | 80% |
| Material | Zinc Alloy + Tempered Glass |
| Charging interface | Type-C |
Guarantee
During the validity period, you can enjoy free return, exchange, repair
services, product returns, and repairs should be handled with invoices.
Once the product has performance failures listed in the “Product Performance
Failure Table”, After testing and confirming, you can get the following
services for free:
| Service Type | Service Policy |
|---|---|
| Return | The product can be returned if there is a quality failure within 7 |
days from the day after the receipt.
Replacement| The product can be replaced if there is a quality failure within
15 days from the day after the receipt.
Maintenance| The product has a quality failure within 1 year from the day
after the receipt and can be repaired.
Product performance failure table
| Defective type | Shell cracks caused by structural or material factors; |
|---|
The plug is loose and cannot be inserted into the socket;
Charging performance fails.
FCC Statement
This device complies with part 15 and part 18 of the FCC Rules. Operation is
Subject To the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation. Changes or modifications not explicitly approved by the
party responsible for compliance could void the user’s authority to operate
this equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 and part 18 of the FCC
Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates,
uses and candidate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of the device, a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected. This device complies with Part 18 of the FCC Rules. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Increase the separation between the equipment and any other radio device.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Warning:
- Do not disassemble, hit, squeeze it or throw it into fire.
- Do not place it in a high-temperature environment.
- Do not use after soaking.