raditeq RGN2400A RadiGen Signal Generator User Guide

raditeq RGN2400A RadiGen Signal Generator

How to connect the RadiGen®

Connect either the LF or HF output to the device, switch the RadiCentre® on, Proceed to the RadiGen® ‘control screen’ to configure the RF signal.

RadiCentre® – Control

Basic changes to the generator settings are done in the control screen.
Press the settings to prompt numeric window where the changes can be made.
Increase or decrease the frequency and level, step by step, with ‘up’ and ‘down’
Press ‘config’ to enter the device configuration screen for more detailed configuration.

How to configure the RadiGen® in RadiMation®

1. Start the latest version of RadiMation® https://www.raditeq.com/radimation-download/
2. Select the button ‘Devices’ at the top menu bar, followed by clicking ‘Configure’;
3. In the configuration screen select ‘Device Drivers’ and Select ‘Signal Generators’ as driver type;
4. Click the ‘Add’ button to open the selection of available drivers in RadiMation®;
5. Enter ‘RGN’ in the search bar which will show all available RadiGen® drivers;
6. Select the correct driver, double click (Optional, rename) and press ‘OK’.
   

Connecting the RadiGen® to the RadiCentre®

1. Select the recently added RadiGen® Driver
2. Select ‘Advanced’
3. Click on the tab ‘RadiCentre®’
4. Under device identification select the RadiCentre® slot number the RadiGen® Card is in
5. When the correct slot number is chosen continue to checking the RadiGen®

How to check whether the RadiGen® is connected to RadiMation

For the best experience make sure that the most recent RadiMation® update is installed. Make sure that all Equipment is correctly connected and turned on.

1. Select Devices in the top menu bar
2. Open Device Drivers and select Device driver Type: Signal Generators
3. Double Click the Recently configured RadiGen® or click edit.
4. Finally select the Check button on the right side of the opened screen.
5. When correctly Configured RadiMation will notify you that the device was installed correctly.
   

Important information

When you need support with the configuration of your Radi-Product in RadiMation®, please consult the RadiMation® support team at: [email protected]

It is also advised to visit the RadiMation® Wiki page and the FAQ section, which can be found at: https://wiki.radimation.com
RadiMation® software can be downloaded at: https://www.raditeq.com/emctest- software/radimation-download

| Read the contents of this product manual carefully and become familiar with the safety markings, the product instructions and the handling of the system. Please refer to the applicable product manual(s) for further information regarding the operation and control of the product(s).
---|---
| This product contains no hazardous substances as described in the RoHS Directive (2015/863/EU).
| This equipment is designed to be used as a plug-in card for the RadiCentre® series. Do not use this card on its own or in combination with any other mainframe. Using this product with any other mainframe can cause harm and will void warranty
| Only qualified maintenance personnel are allowed to perform maintenance and/or repair the equipment.
| This product® contains materials that can be recycled and reused to minimize material waste. At the ‘end-of-life’, specialized companies can dismantle the discarded system to collect the reusable and recyclable materials. If your product is at its ‘end-of-life’, please return it to your local reseller or to Raditeq for recycling.
| This product contains no hazardous substances as described in the RoHS Directive (2011/65/EU).
| This product contains embedded software, which is field upgradeable from the RadiCentre® using the USB-A connection port on the backside panel of the RadiCentre®. For more information about updating your Raditeq plug-in card, please read the RadiCentre® manual.

Optimize your EMC test system

Configure your fully automated EMC test system with the extensive range of Raditeq product

For more information about Raditeq’s EMC and RF products, visit our website at www.raditeq.com

For all Manuals, Datasheets and Quick start Guides, please visit: www.raditeq.com/support/downloads

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>