Uptivo HW815 Bluetooth and ANT+ Heart Rate Armband User Guide
- June 6, 2024
- Uptivo
Table of Contents
Uptivo HW815 Bluetooth and ANT+ Heart Rate Armband User Guide
1 Product Characteristics
Power: Rechargeable lithium battery
Battery life: 4 – 20 hours depending on power settings
Weight:30g
Product size, 47.86 x 47.73 x 14.23 mm
WARNINC
- a. DO NOT w ash the sensor and the strap in a washing machine.
- b. Before hand washing t he strap, remove the heart rate sensor. The heart rate sensor is not washable.
- c. Wash the strap in cold water, and never in water at temperatures higher than 30º C.
- d. DO NOT iron or bleach the strap.
2 What’s Included
3 Function and Operation
Turning ON the sensor
Press the start button. The LED will quickly flash blue, Indicating that it is searching for heart rate. As heart rate is detected, the light will flash slowly.
Turning OFF the sensor
Keep the start button pressed for a few seconds. The LED flashes red, then
enters the shutdown mode.
4 Power Management
- a. If the LED flashes red several times when turning on the monitor. then the battery Is low and needs to be recharged.
- b. The LED flashes red and green alternately while charging. When fully charged, the LED displays a continuous green.
5 Wearing Uptivo Lightband
Wear the armband on the upper portion of your arm, either on your forearm or
on your triceps.
The strap should be tight enough not to move on your arm, but NOT so tight as
to restrict arm blood flow.
6 Supported Devices
The Uptivo Lightband is an advanced heart rate monitor that supports Bluetooth 4.0 and ANT+ transmissions.
Uptivo Armband is the ideal choice for use with smartphones, tablets, and fitness wearables that support the aforementioned transmission standards.
Please refer to your device’s operating instructions for more information on how to connect a Bluetooth or ANT+ monitor.
Bluetooth and ANT+ transmissions can be used simultaneously on different receivers (smartphones. fitness wearables).
7 Advanced functionalities
Uptivo Light band advanced features include:
– On-board memory and workout recording
– Oxygen saturation tracking
– LED heart rate zones customization
Please visit https://uptivo.fit/lightband-guide/
for more information or scan the QR code below.https://uptivo.fit/lighband-
guide
You can connect your Uptivo Armband to the Uptivo App in order to track and save your workout, and verify your fitness level and progress.
To pair your HR monitor to the application start the app and go to ‘HR Sensor’ section: when the sensor is detected tap on ‘Pair’.
Uptivo App is available for iPhone and Android smartphones. You can download it for free on the App Store and Google Play.
The Uptivo Armband is also compatible with many other fitness applications for smartphones and tablets.
For further information visit uptivo.fit
Compliancy
This product is compliant with the Directives 2004 / 108 / EC & 2006/9S/EC.
Uptivo Lightband is an Uptivo S.r.l. product
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>