LiyuanQ FS-D00123 Bluetooth Speaker Portable Wireless Speaker with Microphone User Manual
- June 6, 2024
- LiyuanQ
Table of Contents
LiyuanQ FS-D00123 Bluetooth Speaker Portable Wireless Speaker with
Microphone User Manual
Features
- Ultra-large magnetic circuit high-sensitivity speaker with high penetrating power, low-frequency shock and perfect medium-/high-frequency representation
- The latest decoding chips supporting strably playback of MP3 in up to 32GM U disk/TF card.
- FM radio reception – high-quality digital radio with automatic channel search and storage of up to 60 channels.
- 3. 5mm AUX audio input for each connection to a wide range of sound sources.
- Built-in high-capacity battery for consecutive playback of up to 2 hours.
- Battery with built-in recharging protection to present a long and stable service life.
- Built-in low battery and full recharging indication. Human-oriented use.
- With belt/handle design for best choice of mobile speaker.
- With bluetooth function.
The bluetooth pairing operation and related parameters
- ON/OFF: switch the power to ON, press the key “MODE” to enter the mode of Bluetooth, the display screen will show ‘BLUE”.
- Switch on the Bluetooth function of Mobile phone and searching , while the Mobile phone shows “Liyuan0002″, click the connect directly. mobile phone connection do not need pas sword . if need password , please input-0000” to go on pairing . After success pairing , the speaker will send out a voice of prompt . it is success pairing between mobile phone and Bluetooth speaker.
- Play the music of your mobile phone directly and will give out beautiful voice from speaker.
Recording
Recording via External Microphone:
Connect a storage device (USB/TF card) and short press RECORD key to start
recording for a time depending on the storage capacity. During recording, tune
the –ECH0+” knob to the minimum. It is noticeable that the microphone should
be located a proper distance away from the speaker to prevent any howl-round
or noise.
Notes: This product starts recording from the time as displayed on the
LED screen.
Functional operation and Features
- Microphone volume: Microphone volume regulating knob.
- Master Volume: In MP3/FM/AUX mode, use it to regulate volume output from the speaker.
- TF Port: Read audio files in MP3 format in TF card in capacity up to 32G (FAT32).
- USB Port: Read audio files in MP3 format in USB storage device in capacity up to 32G (FAT32).
- In FM receiving status, short press it to select the previous channel after a full station search has been executed.
- In USB/TF card reading status, short press it to play/pause, or long press it to select one of two playback sequencing modes (All – play all tracks in sequence; ONE – repeat one track). In FM receiving status, long press it to execute a full search (it is recommended to execute at least one full search before using radio receiving function. All founded stations will be saved even in power-off). In AUX input / FM radio status, short press it to toggle between mute and normal volume.
- DM In USB/TF card reading status, short press it to go to the previous track. In FM receiving status, short press It to select the next channel after a full station search has been executed.
- Mode/ : short press it to toggle between USB/TF and FM receiving modes. Long press it to switch the lights.
- Reverberation: Microphone reverberation regulating knob.
- Recording: Short press It to enable recording (USB/TF storage device need be connected first). During recording, reverberation should be tuned to the minimum. Long press it to delete a recording file.
- AUX IN: External sound source input port (plug-and-play).
- E0: Environment Switching: In USB/TF reading status, short press it to select an environment mode (from Square. Meeting, Home, Hall and Personal).
- Power switch: Power on key.
- DC 5V recharging: DC 5V recharging port.
- Recharging indicator light: When recharger is connected, the red light turns on. When the device is fully recharged, the blue light turns on.
- Microphone input: Microphone input Jack.
- LED Screen.
CAUTION:
Please Be sure to charge while music distorted.
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>