IPER CHIAVI RT2 Touch Wheel RF Remote Controller Instruction Manual

: June 6, 2024
: IPER CHIAVI

Table of Contents

Features
Technical Parameters
Mechanical Structures and Installations
Operation
Match Remote Control (two-match ways)
Key function
Safety information
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Touch Wheel RF Remote Controller
Model No.: RT2/RT7
1 and 4 zone CCT/Touch color wheel/Wireless remote 30m distance/AAAx2 battery/Magnet stuck fix

Features

Apply to dual color(warm white + cool white) LED controller.
Ultra sensitive color adjustment touch wheel.
Each remote can match one or more receivers.
AAAx2 battery powered.
Operate with LED indicator light.
Magnet on the back which can be stuck on the back holder.

Technical Parameters

Input and Output

Output signal| RF(2.4GHz)
Working voltage| 3VDC(AAAx2)
Working current| <5mA
Standby current| < 1 OpA
Standby time| 1 year
Remote distance| 30m(Barrier-free space)
Environment
Operation temperature| Ta: -30t – +55 C
IP rating| IP20
Safety and EMC

Mechanical Structures and Installations

To
Option 1: Stick the remote on any metal surfaces directly.
Option 2: ﬁx the remote’ back holder on the wall with two screws.
Option 3: adhere the remote’ back holder to the wall with paster.

Operation

When turning on the light, the indicator displays blue. when turn off light, the indicator display red.
When touching the color wheel, the indicator will display the same color.
When the press or touch operation is invalid (If the light is off), the indicator display red.
To extend battery life, no touch or press key operation after a few seconds, the touch wheel will enter the sleep state, you need press any key to make touch wheel quit sleep state.

Match Remote Control (two-match ways)

End-user can choose the suitable match/delete ways. Two options are offered for selection
Use the controller’s Match key
Match:
Short press match key, immediately press on/off key (single-zone remote) or zone key (multiple zones remote) of the remote.
The LED indicator fast flashes a few times means the match is successful.

Delete:
Press and hold match key for 5s to delete all matches,
The LED indicator fast flash a few times means all matched remotes were deleted.

Use Power Restart
Match:
Switch off the power, then switch on the power, repeat again.
An immediately short press on/off key (single-zone remote) or zone key (multiple zone remote) 3 times on the remote.
The light blinks 3 times means the match is successful.
Delete:
Switch off the power, then switch on power, repeat again.
An immediately short press on/off key (single-zone remote) or zone key (multiple zones remote) 5 times on the remote.
The light blinks 5 times means all matched remotes were deleted.

Key function

RT2 1 zone CCT remote

| : Turn on/off light.
: Touch to change color temperature.
: Adjust brightness, short press 10 levels,
long press 1-6s for continuous 256 levels adjustment.
: Get warm white or cold white directly.
25%, 50%, 75%,100% brightness.
Short press recalls the scene, long press 2s save current state into S1/2/3/4. the LED indicator display green when save OK.
---|---

RT7 4 zones CCT remote

| : Short press turn on/off all zone light.
: Touch to change current zone color temperature.
Short press select and turn on zone light, long press 2s turn off zone light.
Short press the multiple zone key fastly, will select multiple zones synchronously.
: Adjust the brightness for the currently selected zone, short press 10 levels, long press 1-6s for continuous 256 levels adjustment.
: Get warm white or cold white directly for the currently selected zone.
: Short press recall the scene,
long press 2s save current state into S1/2/3/4.
the LED indicator display green when save OK.
4 zone recall or save synchronously.
---|---

Safety information

Read all instructions carefully before you begin this installation.
When installing the battery, pay attention to the battery’s positive and negative polarity.
A long time without the remote control, remove the battery.
When remote distance becomes smaller and insensitive, replace the battery.
If no response from the receiver, please re-match the remote.
Gently handle remote, beware of falling.
For indoor and dry location use only.