phocos ECO-N-T Series Solar Charge Controller User Guide
- October 27, 2023
- phocos
Table of Contents
phocos ECO-N-T Series Solar Charge Controller
Important Safety Instructions
Please read the instructions and warnings in the manual before beginning any
installation.
High Voltage Risks
Operation of this device may produce a high voltage which could cause severe
injuries or death in case of improper installation r operation.
Quick Start Guide
System Voltage
The controller is intended for 12V& 24 V systems.
Battery Type
Suitable for use with lead acid batteries (vented, GEL or AGM batteries)
Low Voltage Disconnect
Battery low voltage disconnect at voltage 11V Reconnect at voltage > 12.8V
Connection Sequence
“Phocos strongly recommends installing an inline fuse as close to the battery terminal as possible. 15A fuse for 10A charging or 30A fuse for 20A charging.
- Connect the battery to the charge controller Positive(+)& Negative (-).
- Connect the PV modules to the charge controller Positive (+)& Negative (-)
- Connect the load to the charge controller-Positive (+)& Negative (-).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>