VERSONEL VLS95 WiFi Motion Sensor Robotic Security Light Installation Guide
- June 9, 2024
- VERSONEL
Table of Contents
VSL95
Quick Installation Guide.
VLS95 WiFi Motion Sensor Robotic Security Light
Switch off the power before installing the fixture
Select installation area and install between 6.6 ft/2 meters – 10 ft /3 meters
above the ground
Feed the fixture black
and white wires through the Universal mounting bracket and through the EVA
gasket before connecting inside the junction box.
Use the Wire Nuts and
connect the wires inside the junction box:
Align the light
fixture with the base cover and ensure the backplate seal is in place before
tightening the Light fixture to the base over using the base cover screws and
cover the screw heads with the decorative screw covers
Installation Summary
The installation process involves the following steps;
- After installation, power-up and switch the power on t o the VSL95 fixture.
- Scan the QR code appropriate to your phone to download the free “Tuya Smart “App to an iOS or Android device.
- The VSL95 fixture unique ID is permanently connected to the Wi-Fi.
- Once the VSL95 fixture is successfully connected, an acceptance sound will be heard when connected.
NB: If the connection is not successful, you can resetthe VSL95 fixture:
• Open the SD card cover and push the reset button in for 3 seconds an sound
will indicate the reset has been successful and then repeat the Wi-Fi pairing
process below.
Tuya Smart(with Tuya logo):
QR code for downloading
https://smartapp.tuya.com/tuyasmart
Ensure your phone or tablet is connected to the Wi-Fi network you intend to use for the VSL9S fixture.
-
Open the Tuya Smart App and follow the steps on your smartphone
-
First time in, select “Sign Up “ and Register to obtain a verification code to create your unique account
Note: Should you already use the APP on your phone then select “Log in” -
Input your verification code and Set your password, then select “Done”.
Add and connect your VSL95 to the Wi-Fi network following these easy 5 screenshots steps below:
-
Click on Add Device explained here below( only to add to existing devices click top right )
-
Click on Camera & Lock
-
Click on Smart Camera(Wi – Fi)
-
After step 3 click next by following the APP screenshot guideline here below
-
Ensure to select 2.4 GHz and enter your Wi-Fi details and password and click next
NB: If the connection or pairing process is not successful, you can reset
the VSL95 fixture by following the below 2 options;
Option 1. To delete the VSL95 fixture from the App screen, and then to
repeat the Wi-Fi pairing process explained below on the screenshots with 3
easy steps.
-
Click on menu bar
-
Click on Device Management
-
Drag the camera fixture to Remove Device
Option 2. To push the “Rotation Off “icon on the App screen for the LED
head with the camera to be static the center position of the fixture and then
to open the SD memory card cover that i s located at the bottom of the LED
lamp head and push the reset button in for 3 seconds. A notification sound
will indicate the reset has been successful, and then repeat the Wi-Fi pairing
process below.
When the VSL95 fixture is successfully connected to the Wi-Fi network, the
camera images from the installed Night Watcher can be viewed.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>