Doopa PB-01 Heated Socks Instruction Manual

Doopa PB-01 Heated Socks Instruction Manual

PACKING LIST

PRODUCT DESCRIPTION

PRODUCT PARAMETERS

Rated voltage: 5V/2A
Charging time: 5-6H
Weight (G): 500-550
Packing box size (IN): 4. 331. 721. 96
Socks material: 20% acrylic, 10% PBT, 15% nylon, 15% modal, 20% mink, 20% spandex
Rated power: 5W
Service timeat full power: 3-15H
Single battery capacity: 5000mAh

SIZE

WASHING INSTRUCTIONS

1. The water temperature should not exceed 122°F
2. The battery must be removed before cleaning, and the battery connecting wire must be sorted and put back into the battery bag. (note that the battery cannot be washed with water)
3. Stockings must be machine washed after being put into the laundry bag. It is recommended to wash them by hand.
4. Turn the power cord out and dry it naturally. Do not use a high-temperature iron or dry it at high temperature for dehydration.

PRECAUTIONS

1. It is forbidden to approach high-temperature, flammable or explosive objects.
2. Do not fall by gravity, do not disassemble or reassemble.
3. If the battery is not used frequently, it is recommended to recharge and activate it every 60 days.
4. It is recommended not to use high temperature for a long time to avoid skin discomfort.
5. Keep the battery in good condition. The battery shall be stored in a dry and cool environment.
6. Prevent low-temperature burns (if the human body is in a low-temperature environment, the body feels dull, and there are differences in physical fitness. If there is slight burning sensation, your temperature may have exceeded that of the skin. It is recommended to feel warm, not cold. Please lower the temperature in time when the body feels slightly burning.

BATTERY CONTROL INSTRUCTIONS

1. Check the battery level of the special battery for stockings, and charge them to the full state.
2. Distinguish between left and right socks and wear them correctly, keep the battery pocket on the outside of the shins.
3. The battery needs to be connected to the sock to turn it on. Single press to display the remaining battery power
4. Connect the TYPE-C power cord in the pocket of the sock to the mobile power supply and fasten it tightly.

APP TEMPERATURE CONTROL INSTRUCTIONS

1. Use your mobile phone to scan the QR code on the last page to download the Bluetooth temperature control APP (IWARMU).
2. The stockings must be connected to the battery, and the Bluetooth APP function is available; if the battery is pulled out, the Bluetooth Master APP cannot connect to the battery control.
3. Turn on the mobile phone positioning and Bluetooth functions for APP Bluetooth control.
4. Initialize the connection, open the binding page, and automatically search for equipment connection to use.
5. If you need to switch more than two pairs of stockings batteries, please unplug the batteries after the first pair of stockings debugging Bluetooth connection is completed, and then try the next pair of stockings so as not to cause multiple Bluetooth signals to appear at the same time, disturb the Bluetooth connection and match confusion.
6. After the battery is connected to the sock, the APP will restore the last connection by default, and the initial device will automatically connect to the battery with Bluetooth enabled.
7. It is recommended that the battery of each pair of stockings is commonly used to match fixed mobile phone without unbinding or reconnecting.

The connection is SET (green light) and it will be off after 5 seconds.

5. Battery button: long button press for 5 seconds to switch the machine on and off; long button press for 2-5 seconds to let go of the strong heating mode; short button press for 6 gears to switch gears cyclically.

6. The heating mode will automatically exit after lasting for 1 minute and return to the previous mode. It cannot be used for a long time to avoid burns.

BATTERY BUTTON FUNCTION DESCRIPTION

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>