DABSTORY SAPO Liquid Soap Dispenser Holder Instruction Manual

June 6, 2024
DABSTORY

DABSTORY SAPO Liquid Soap Dispenser Holder - logo SAPO Liquid Soap Dispenser Holder
Instruction Manual

Guarantee terms:

DABSTORY s.c. provides a consumer guarantee for DABSTORY s.c. products under the name SAPO. The guarantee covers only defects arising from causes inherent to the product sold. The guarantee period is 2 years from the date of purchase. The guarantee in no way excludes, suspends or limits the rights arising from the provisions of the warranty for defects of the sold item. If a product is found to be defective, the consumer may file a complaint via email correspondence to: adabstory.com or through the dedicated form available at https://dabstoryshop.com/data/include/cms//GOODS_RETURN_FORM_ENG.pdf. In the complaint application, you must provide first and last name, telephone number, e-mail address, proof of purchase of the product, a detailed description of the defects along with photographic documentation (if possible). DABSTORY s.c. shall respond to the submitted complaint within 14 days of its receipt in the form of electronic correspondence to the e-mail address provided or by phone. If it proves necessary to consider the complaint, the purchased product should be delivered, at the expense of the complainant, to the address DABSTORY s.c. ul. Gcbicka 22, 62-200 Gniezno. If the complaint is accepted, DABSTORY s.c. shall remove the defects within 14 days or replace the purchased goods with goods free from defects, if the defects do not qualify for removal. The guarantee does not cover damage to the product resulting from improper installation, use, cleaning, or maintenance, as well as damage resulting from fortuitous events (e.g. fire), caused by chemical substances, mechanical damage resulting from the operation of the product, damage resulting from excessive load on the product and those resulting from failure to follow the installation instructions. This guarantee excludes wear and tear arising from normal use of the product. The guarantee does not apply to products purchased as inferior or discounted, and those in which any alterations have been made without the consent and knowledge of DABSTORY s.c. DABSTO-RY s.c. shall not be liable for any damages or defects beyond the scope of the guarantee. The guarantee is valid worldwide.

General installation rules:

Before installation, please read the steps in the instructions and product maintenance. It is imperative to follow the order of the installation steps with the general installation  rules:

  • Do not install items in case of finding defects or damage to purchased items.
  • Observe safety regulations and use safety glasses and gloves when drilling holes.

Maintenance and use:

When using the liquid soap dispenser holder, check for looseness of the mounting screws as needed. Do not use rough sponges or components containing abrasives for cleaning. This may cause tarnishing or scratching of the surface. Do not use cleaners containing solvents, acids, or cooking vinegar. Test the cleaning agent on an inconspicuous area of the product first. Clean the surface with a soft cloth or paper towel.
NOTE!!! Excessive loads on products create a hazard during use and risk permanent damage.

ATTENTION

The installation set includes dowels designed for materials such as plain concrete, ceramic brick, silicate brick, hollow brick, ceramic hollow block, autoclaved concrete, plaster- cardboard panel. Since the wall material may be different in every home, contact your local specialty store for advice on choosing the right screws.

DABSTORY SAPO Liquid Soap Dispenser Holder - figure 1| DABSTORY SAPO Liquid Soap Dispenser Holder - figure
2
---|---
The minimum wall thickness is 10 mm.| The maximum load of the product is 3 kg.

Preparation stage

Prepare your tools
DABSTORY SAPO Liquid Soap Dispenser Holder - figure 3 Check the package contents

DABSTORY SAPO Liquid Soap Dispenser Holder - figure 4The number of fastening sets should correspond with the holes in the back of the holder

Installation stage

**A** Place the holder with the spirit level on the wall
DABSTORY SAPO Liquid Soap Dispenser Holder - figure 5
B Mark out the hole locations
DABSTORY SAPO Liquid Soap Dispenser Holder - figure 6C Drill holes
DABSTORY SAPO Liquid Soap Dispenser Holder - figure 7D Screw on the holder
DABSTORY SAPO Liquid Soap Dispenser Holder - figure 8E Cover the screws
DABSTORY SAPO Liquid Soap Dispenser Holder - figure 9F Mounting the dispenser in the holder

DABSTORY SAPO Liquid Soap Dispenser Holder - logo

Manufacturer:
DABSTORY S.C.
Ul. Wilczak 20F/37
61-623 Poznań| www.dabstory.com
info@dabstory.com
+48 608 885 045
---|---

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals