idea display Q32P 4K Monitor 32-inch IPS UHD Computer Gaming Monitor Instruction Manual
- June 6, 2024
- idea display
Table of Contents
idea display Q32P 4K Monitor 32-inch IPS UHD Computer Gaming Monitor
Instruction Manual
Please read this manual thoroughly before use,and keep it handy for future reference
GENERAL INFORMATION
Dear Customer,
Thank you for having purchased this product. This document describes how to
install and use the LCD colour monitor. Read this manual which contains
information for correct, safe use carefully. Keep this manual at hand so that
you can refer to it when needed.
PRODUCT DESCRIPTION AND TYPE OF USE
The LCD color monitor presents a very rugged structure. It is designed for
continuous operation and can be used in closed circuit TV systems without
risks of excessive fatigue. The Flat Panel Display has an active matrix, thin-
film transistor (TFT), liquid crystal display (LCD).
GENERAL FEATURES
- Display area
- Wall mounting with not included bracket
- One composite one DP, one HDMI, one USB-C, one USB-B, two USB-A
- Wide inclination to allow viewing either from a seated position or standing up and when moving from one position to the other Multilingual OSD menu for easy setting and optimization of the display
OPENING THE BOX
Check that the packing and the contents are not visibly damaged. Contact the
retailer immediately if parts are either missing or damaged. Do not attempt to
use the device in this case. Send the product back in its original packing if
it is damaged.
CONTENTS OF THE BOX
- LCD monitor
- Power Adaptor
- Power cable
- HDMI cable
- USB-C cable
- Audio cable(Optional)
- Remote Control
- User’s manual
Important Note: Accessories may be changed without prior notice.
WARNINGS
POWER
- Only use the power unit provided to power the device. Check mains rating before plugging the power unit in.
- Do not pull the cable to unplug the device.
SAFETY PRECAUTIONS
- Keep the device away from rain and humidity to prevent risk of fire and electrocution. Do not introduce material (solid or liquid) inside. If this should accidentally occur, disconnect the device from the mains and have it inspected by qualified personnel.
- Never open the device. In all cases, contact the qualified personnel or authorized service center for repairs.
- Keep the device away from chEren, to prevent accidental damage.
- Do not touch the device with wet hands to prevent electrical shock or mechanical damage.
- Do not use the device if it should fall or the external casing is damaged. Risk of electrocution if the device is used in such conditions. Contact the retailer or authorized installer.
- It is advisable to disconnect the power wire if the monitor is not used for a certain time.
INSTALLATION PRECAUTIONS
-
To prevent overheating the device, arrange it in a position allowing the flow of air through the slots in the casing. Ensure at least 5 cm of free space when installing inside a rack. For the same reason, do not install sources of heat, such as radiators or hot air ducts. Keep away from direct sunlight. Do not install in areas subject to excessive dust, mechanical vibrations or shocks.
-
Do not arrange this device on an unstable surface, such as a tottering or slanted table. The
device could fall causing injury or mechanical failures. -
Do not install the device in a place where it could be exposed to humidity or water. Do not direct a jet of water onto the device: risk of fire, electrocution or mechanical failure.
-
Stop using the device if water or other material should penetrate inside: risk of fire and
electrocution. Contact the retailer or authorized installer. -
Slots and openings in the cabinet are provided for ventilation. These openings must not be
blocked or covered. -
Do not place heavy or heat generating objects on top of the device: this could damage the casing and/or increase internal temperature causing faults.
-
Do not cover the device with a cloth while it is running to prevent deforming the external casing and overheating the internal parts: risk of fire, electrocution and mechanical failur
-
Keep magnets and magnetized objects away from the device to prevent faults.
-
Do not use the device in presence of smoke, vapor, humidity, dust or intense vibrations.
-
Wait for a while before operating a device immediately after transporting it from a cold place to a warm place and vice versa. Wait on average for three hours: this will allow the device to adapt to the new ambient (temperature, humidity, etc.).
-
The monitor is provided with a plastic base and rubber feet. It can be positioned on a horizontal surface, such as a desk or a table. Make sure that the device is fastened firmly and that it is not resting on unstable supports or surfaces. Dropping could cause severe injury and damage the device.
-
Remember to adjust the brightness and contrast to obtain a perfect image.
-
The monitor can also be installed on the wall by means of a bracket (not provided).
CLEANING THE DEVICE
- Rub delicately with a dry cloth to remove dust and dirt.
- Dip the cloth in neutral detergent if dirt cannot be eliminated with a dry cloth alone.
- Do not use volatile liquids (such a petrol, alcohol, solvents, etc.) or chemically treated clothes to clean the device to prevent deformation, deterioration or scratches to the paint finish.
PRIVACY AND COPYRIGHT
The LED monitor is a device for Gaming. Recording of images is subject to the
laws in
force in your country. Recording of images protected by copyright is
forbidden.
Product users shall be responsible for checking and respecting all local rules
and regulations
concerning monitoring and recording video signals. The manufacturing SHALL NOT
BE LIABLE for use of this product not in compliance with the laws in force.
Setup Guide
Accessories
Technical Drawing
Monitor Inputs
Control Panel
The color and shape of parts may differ from what is shown. Specificaons are subject to change without notice to improve quality.
Initial Setup
Connect the monitor to a power outlet.
-
Press the POWER button on the monitor or to turn it on (The indicator will be blue)
-
Connect the relevant cable to the corresponding input on the monitor. The source will be
automatically detected. -
To change between inputs, press the ” E” button to enter the source menu. Use the
◄ and ► buttons to choose the input source between USB C, DP and HDMI.
Menu Options
The menu for the monitor can be accessed by pressing the “M” button on the
control panel. This menu is separated into the following sub menus: Picture
Settings, Image Settings, Color Temperature, OSD Settings, Reset, and
Miscellaneous options, details of each menu can be found in the following
section.
Note:
Some settings may not be adjustable in which case they will be grayed out.
This could be due to the input source or other options chosen within the
menus.
Technical Specifications
THANK YOU FOR CHOOSING idea display
idea display is a gaming monitor brand that belongs to perfect Display
Technology Co.,Ltd
which focused on R&D display industry 16 years in China.
We provide high quality yet affordable products that deliver the highest level
of performance.
Experiencing gaming at its best with idea display .
If you have any questions and comments please do not hestate to contact us:
E-mail:e-op@perfect-display.com.cn.
REGISTER YOUR PRODUCT
Please register your product online: https://www.perfectdisplay.com
idea display encourages you to register your products within thirty(30)days of
the original purchases in order to receive prompt service and support coverage
should you need it. idea display may require that you furnish proof of
purchase details and / or comply with
registration requirements before receiving warranty service.
www.ideadisplay.store
www.facebook.com/pd.display
www.twitter.com/DisplayPerfect
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>