prilux Hexagon Play RGBW Projector Instruction Manual
- June 6, 2024
- prilux
Table of Contents
Hexagon Play RGBW Projector
Instruction Manual
Specifications
| Electrical isolation| CI|
---|---|---|---
| Sealing rating| IP66|
| Impact resistance| IK10|
| LED Number| 40 LED| 80 LED
| Weight| 9Kg| 17Kg
| Sealing rating| –| –
| Wind resistance| 0,082m2| 0,169m2
PRECAUTIONS:
- Keep out of reach of children.
- This product is for outdoor use, pay attention to the permissible mounting positions for this product.
- Do not immerse this product in water or handle it with wet hands.
- Do not hit the product.
- Do not install the product where there are sources of heat.
- Do not handle the product while it is in operation and let it cool before touching it with your hands.
- Keep a minimum distance of 1m with the surface or object to be illuminated.
- The product must not be covered by thermal insulation material in any case.
- If the product is damaged, replace it immediately with a new one.
- Disconnect the power before installing the product.
- This product contains components sensitive to static electricity and a discharge on it could destroy or damage its components.
- Before proceeding with any handling or maintenance, make sure that the appliance is completely disconnected from the power supply.
- The replacement or maintenance of any component must be done with the same elements recommended and supplied by the manufacturer. If this is not the case, any incident in an installation that has not been carried out in accordance with this instruction sheet will be the responsibility of the installer.
- If the flexible cable or cord of this luminaire is damaged, it must only be replaced by the manufacturer or its technical service or a person of equivalent qualification in order to avoid any risk.
- The light source of this luminaire must be replaced only by the manufacturer, its technical service, or an equivalent qualified person.
- The luminaire should be placed so that a prolonged look at the luminaire is not expected at a distance closer to 4.67m.
- Between the low voltage power supply and the control conductors, the insulation is reinforced insulation.
- Any modification to the luminaire voids the warranty
WARNING
BEFORE INSTALLING THIS PRODUCT, PLEASE READ THE INSTRUCTIONS CAREFULLY AND
STORE THEM IN A SAFE PLACE.
THE INSTALLATION SHOULD BE CARRIED OUT BY TRAINED STAFF.
INCORRECT HANDLING OF THE PARTS OR THE LIGHT FIXTURE ITSELF MAY IMPAIR THE
PROPER PERFORMANCE OF THIS PRODUCT. IN THIS CASE, THE MANUFACTURER GUARANTEE
SHALL BE DEEMED VOID.
THE MANUFACTURER GUARANTEE SHALL BE DEEMED VOID: IF THE INSTALLATION IS NOT
PERFORMED IN ACCORDANCE WITH THE SPANISH LOW VOLTAGE ELECTROTECHNICAL
REGULATION 2002 (REBT 2002).
THE APPLICATION OF IBC BT09-4 OF REBT (INSTALLATION OF LINE AND LIGHT FIXTURE
SURGE PROTECTORS) IS ESSENTIAL FOR INDUSTRIAL AND PUBLIC LIGHTING
INSTALLATIONS. THE GUARANTEE DOES NOT COVER AGAINST DAMAGES CAUSED BY SURGES
IN LIGHT FIXTURES WITHOUT SURGE PROTECTORS INSTALLED.
ATTENTION!!!
RESPECT THE PRECAUTIONS FOR HANDLING COMPONENTS SENSITIVE TO ELECTROSTATIC
DISCHARGES (LEDS).
Components
1 MODULE
2 MODULES
Mounting
FLOOR
Fix minimum with 3 screws M12
Use corrosion-resistant materials.
For fixing the projector it is recommended to use the external holes to
minimize possible vibrations due to wind. For high heights or very unfavorable
conditions, use a second fixing system as a safety cable. Eliminate physical
elements on the LED modules that may impair dissipation. Carry out periodic
cleaning maintenance depending on how aggressive the environment of your
installation is. For applications in extremely corrosive environments, perform
preventive maintenance by replacing partially oxidized materials.
Turn
INSTALLATION DIAGRAM
DYNAMIC
N| N
L| L
|
DALI
N| N
1| L
2| DA
3| DA
|
DMX
N| N
L| L
|
MOUNTING THE CONNECTOR
STRIPPING CABLE
To ensure the degree of protection, no twisting force must be applied to the
connection.
The minimum radius of the curvature of the conductors must be more than 4
times the diameter of the conductor.
MAINTENANCE
CHANGE THE OVERVOLTAGE PROTECTOR
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>