Naniwan A7 Bluetooth Speaker User Manual

Naniwan A7 Bluetooth Speaker

Product Diagram

Specification

• Wireless version: V5.0
• Input: Micro USB DC 5V1A
• Charging: 500mAh Bluetooth
• distance: >15M
• Charging time: about 2 hours
• Speaker power: 3W3Ω
• Product size: 7076.525.6mm

Packing List

Speaker1pc, User Manual1pc, USB charging1pc, Carabiner1pc

Operation Instruction

1. Press the power button about 5sec, Speaker will be ON with blinking Blue indicator and voice announced (Speaker will be automatically in Bluetooth Mode if unplug the Aux in Cord.)
2. The speaker will be automatically switched to Aux in mode when plugged in Aux in cord.

• Bluetooth Connection

1. Speaker will automatically paired with last device. Quick flash Blue Led indicated the speaker is in pairing. (The pairing time will be different from different device)
2. Turning on the BLUETOOTH on your smartphone setting, and searching for the “A7”and paired with voice announced, the Blue LED flash in slow flash after well paired.
3. Playing music wireless after well paired.
4. Answering and ending a call works the same way: simply click the PLAY/PAUSE button on your speaker unit.(Some smartphone automatically using bluetooth calling if answering calls on the phone.)

• Aux In Mode

1. The speaker will switch to Aux In mode when plugged in Aux in Cord, the Blue LED in slow flash.
2. Connected the speaker with computer/smartphone via Aux in Cord.

• Volume UP & Down

Long press the button “+/-”to up & down the volume.

• Previous & Next Songs switch

Click the button “+/-”to switch previous & next songs.(in Bluetooth Mode)

• Method of connecting with computer/tablet

Please ensure you have Bluetooth program on your device, then pairing the bluetooth the same way as smartphone stated above.

• How to Charging

Charging by Micro USB cord. The RED indicator keeps light in charging, lights turned off when fully charged.Red indicator flash when speaker is  in low battery. The charging time is about 2H.

• Instruction for LED Indicator

Quick Flash in BLUE is in pairing,flash slow indicated well paired. LED becomes RED in Aux in mode. When charging, LED is in solid RED, LED light turned off when fully charged, if low battery, flashing in RED

FAQ

• Sound Quality
  Intermittent failure of sound or speaker automatically powered off, please charge the speaker now. Speaker will be slightly virbrated with stronger bass, please clean the pad now. the pad is used for more bass and better sound. Please ensure the protection of the pad is moved in the using process.

• Can NOT paired
  Please ensure the speaker is ON, and the Blue LED is in quicky flash, speaker is in Pairing. Speaker can only paired with one device in one time, to check if it already paired with another device. Otherwise you have to turn on the speaker and try once again. Transmission range is about 8-10M,make sure your phone is not far away from speaker.

• Speaker OFF automatically
  Speaker powered off if no operation in 10min when the speaker is well paired.You have to reset the speaker.

Attention Please

1.  Please stock it in normal temperature.
2.  Please don’t use under the high humidity and temperature for long time.
3.  Please don’t place it together with Magnetized materials.
4.  High-altitude falling may destory the speaker.
5.  Please don’t try to tear the speaker by yourself, or cleaning it with chemical solvent
6.  Please turn off the speaker if long time not to use.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
3. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
   Note: This equipment has been tested and found to comply with the limits for a class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
   This equipment generates uses and can radiate radio frequence energy and,if not installed and used in accordance with the instructions,may cause harmful interference to radio communications.However,there is no guarantee that interference will not occur in a particular installation.if this equipmemt does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an autlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The devicecan be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>