Ce Labs 2GCA6B Media Players User Manual

Safety Information

Read and understand all instructions before using this product. If damage is caused by failure to follow the instructions, the warranty does not apply.

1.1 Warning
To reduce the risk of electric shock, DO NOT remove the cover (or back).
DO NOT attempt to repair the product, this could lead to the risk of injury, damage to the product.
To reduce the risk of fire or electric shock, keep this product away from exposed direct sunlight, naked flames or heat, large amounts of moisture, dust, and sand.
FCC Note (for the U.S.A)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on.
The user is encouraged to try to correct the interference by one or more of the following measures. – Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Consult the dealer or an experienced radio/TV technician for help.
– This class B digital product meets all requirements of the Canadian Interference – Causing Equipment Regulations.

1.2 Precautions
Important Safety Instructions
Read these operating instructions carefully before using the unit. Follow all the safety instructions are listed below.
Keep these operating instructions handy for future reference.
1.2.1 Read these instructions.
1.2.2 Keep these instructions.
1.2.3 Heed all warnings.
1.2.4 Follow all instructions.
1.2.5 DO NOT use this apparatus near water.
1.2.6 DO NOT clean with any chemical detergent. Clean only with a dry cloth.
1.2.7 DO NOT block any ventilation openings. Install in accordance with the manufacturer’s instructions.
1.2.8 DO NOT install near any heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.
1.2.9 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where it exits the apparatus.
1.2.10 Only use attachments/accessories specified by the manufacturer.
1.2.11 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
1.2.12 Unplug this apparatus during lightning storms or when unused for a long period of time.
1.2.13 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as when the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

1.3 Handling Cautions
1.3.1 DO NOT expose this apparatus to dripping or splashing. Do not put objects filled with liquids, such as vases on the apparatus.
1.3.2 To turn this apparatus off completely, you must pull the power plug out of the wall socket. Consequently, the power plug must be easily and readily accessible at all times.
1.3.3 DO NOT plug multiple electric devices into the same wall socket. Overloading a socket can cause it to overheat, resulting in a fire.
1.3.4 Before connecting other components to this player, be sure to turn them off.
1.3.5 If the product makes an abnormal noise or produces a burning smell or smoke, turn off the power switch immediately and disconnect the power plug from the wall outlet.  Then, contact the nearest customer service center for technical assistance. Do not use the product. Using the product as it is may cause a fire or an electric shock.

Introduction

2.1 Package Contents
Enjoy TV Quad Core – CE440
User’s Guide
HDMI Cable
IR Remote Controller
Optional Remote Controller
2.4G wireless Remote Controller
USB wire/wireless Mouse & Keyboard
Power Adapter, Input: AC100 ~ 240V, 50/60Hz, Output: 12V/2A

2.2 Product Features

• Android TV 9.0 OS
•  Chromecast Built-In
• Google Assistant
• Quad-Core CPU, G31 MP2 GPU, frequency is 2.0GHz, RAM is 2G, built-in 16G EMMC.
• RJ45 10/1000M Ethernet interface
• Support 4k2k video local media playback from SD card or USB HDD
• Built-in 802.11b/g/n AC WI-FI module with the antenna inside, Wi-Fi frequency the range is 2.4G&5.8G
• RJ45:Wired internet connection
• HDMI video output, connect to HDTV for HD video playback
• 2 external USB interface, support mobile HDD, support mouse, and keyboard operating
• Support USB mouse and keyboard operation
• Support simple BT remote control with mouse function
• Support music player, picture player, and more family entertainment
• Support Micro SD card

2.5 Setup Connection
2.5.1Place CE440 on a flat platform near the TV, and make sure nothing blocks the remote control signal.

2.6 Power Up
2.6.1 After power-up, the TV will first show a green robot during loading. When loading is finished, it will go to the Home screen.

2.6.2 Home Screen display.

Settings

Using Navigation (4 directions), OK, EXIT, and Menu keys of Remote Controller to select the options, the option selected will be highlighted and confirmed by pressing an OK  key. The same operation for text input if needed. Select icon, you can choose the button ‘Display’, ‘HDMI CEC’, ‘Audio Output’, ‘Powerker definition’, ‘Picture’ as your needs.  (Explained on 3.22)

If not, then press the ‘More settings’ key to set. Shown as bellow.

3.1 WiFi
3.1.1 It will automatically scan ambient WiFi networks when selecting “ON”.
Connect an available WiFi network. If connect a secured WiFi network, the corresponding password will be input firstly. Or fail to connect and need to reset the password. Once build up the connection with a certain WiFi network successfullyCE440 will connect this WiFi network automatically when restart.
Note: If factory reset, the password of the WiFi network has to be reset.

3.1.2 WiFi Hotspot
If you want to share WIFI with your friends, you can set the Portable hotspot here, set the wi-fi password, and turn on the hotspot switch for transmission.

3.2 Ethernet
Network&internet—Ethernet—Setting Interface(shown picture)

3.3 Sound
Select icon, then press ‘More settings’, and find the sound button

3.3.1 Media Volumes and Alarm volume
Increase or decrease sound volumes
3.3.2 Touch Sounds
If enable Touch sound, the sound will be heard while moving the remote controller.
3.3.3 Default notification sound and Default alarm sound
The type of sound can be set in this part.

3.4 Display
Select icon, then press ‘More settings’, and find the sound button

3.4.1 Display size
making the items on your screen smaller or larger. Some apps on your screen may change position.

3.4.2 Font size
Change the font size of OSD.， Make the text on a screen smaller or larger

3.5 Screen saver
Select icon, then press ‘More settings’ —‘Display’—‘Screen saver’.
Interface Settings： can set the clock, color, theme, page photos.

3.6 Storage
Shows the storage used of the OS and SD card.

3.7 Apps
List all apps installed.

You can choose an application and force to shut down the app, uninstall the app, clear user data, move to SD card, and clear cache data.

3.8 Google
Select icon, then press ‘More settings’, and find the Google button.

3.9 Apps & Notifications
Select icon, then press ‘More settings’, and find the ‘Apps & Notifications ‘button.

3.10 Location
Select icon,then press ‘More settings’ ,Security & Location —Location .

3.11 Security
Select icon, then press ‘More settings’ , find the ‘Security & Location’ button, and the security setting interface will show.

3.12 Language & input
Select icon, then press ‘More settings’ , ‘System’ — ‘Languages&input’ — bellow is the shown interface.

Change OSD language and input method.
The default input method is the android standard keyboard.
If you are using our IR remote control, enter into the “Default” option and switch to the remote controller input method.

3.13 Reset
Select icon, then press ‘More settings’, ‘System’ — ‘Reset options’ — bellow is the shown interface.

Factory data reset:
You can reset all the settings and apps to factory default.
Note: You might want to backup important data before resetting the box. Once you choose to rest to factory default, all data/apps will be deleted.

3.14 Sleep
‘Display’ — ‘Sleep’. You can select the Sleep time of the product. There are 8 options for sleep time. The shortest is’ Never ‘and the longest is 30 minutes.

3.15 Account

Select icon, then press ‘More settings’, find the Accounts button.

3.16 Date & time
Select icon,then press ‘More settings’ , ‘System’ — ‘Date&time’ — bellow is the shown interface .

3.17 Wallpaper
‘Display’—‘Wallpaper’. “Users can choose wallpaper photos from albums and historical wallpapers according to their preferences.

3.18 About device.
Select icon, then press ‘More settings’ —‘System’ — ‘About device’

3.19 Display Setting
Select icon, you can choose the button ‘Display’. Users can set the screen position， display resolution, HDR to SDR, SDR to HDR in this part.

3.20 HDMI CEC
Select icon, you can choose the button ‘HDMI CEC’. Users can set the CEC Switch， One key play， One key power off, Auto change language in this part.

3.21 Audio Output
Select icon, you can choose the button ‘Audio Output’. Users can set the Dolby and Audio Format in this part.

3.22 Powerker definition
Select icon, you can choose the button ‘Powerker definition’.Users can set the power mode in this part.

3.23 Picture

Select icon, you can choose the button ‘‘Picture’.Users can set the Picture mode， Custom Settings， DNR, Backlight in this part.

Apps Install & Uninstall

On CE440, you can install apps from Android Market over the Internet or other sources, such as other online sources, the internal storage, and the USB storage device and SD  card that you have mounted onto CE440. You also can manage apps on CE440 and SD card, install/uninstall apps, stop running apps, or select other options.

Trouble Shooting/FAQ

6.1 No Picture
Refer to the TV user manual for how to select the correct video input channel.
6.2 USB Content cannot be read
. The format of the USB storage device is not supported
. The supported memory size is 64G maximum.
. Make sure that this player supports these files.
6.3 Remote Controller cannot respond quickly to the pressing of keys
Make sure that batteries have enough power.

6.4 The firmware updating is not complete after a long time
If you update the firmware over the online service, it may take a long time to download the firmware update files from the server. To save your time, update the firmware through the SD card.

Specification

CPU
GPU
RAM
OS
USB
HDMI
DC Input
SD Slot
Video Output
Audio Output
IR receiver
LAN
Wi-Fi
BT
Audio
Decoder
Video/Picture
Decoder

| Quad Core ARM Cortex-A55 CPU up to @ 2.0GHz
ARM G31 MP2 GPU
4GB LPDDR4
16G EMMC(OPTIONAL 32G/64G)
Android TV OS
USB2.01 USB3.01
V2.1
12V-2A
Max: 64G
HDMI
HDMI
optional
RJ45
10/1000M
Ethernet
interface
IEEE 802.11 B/G/N AC 2.4G&5.8G
BT 4.0
Supports MP3,AAC,WMA,RM,FLAC,Ogg and programmable with 7.1/5.1
down-mixing
VPVP9 Profile-2 up to 4Kx2K@60fps
AVS2-P2 Profile up to 4Kx2K@60fps
H.264 AVC HP @L5.1 up to 4kx2k@30fps
MPEG-4 ASP@L5 up to 1080P@60fps (ISO-14496)
WMV/VC-1 SP/MP/AP up to 1080P@60fps
AVS-P16(AVS+) /AVS-P2 JiZhun Profile up to 1080P@60fps
MPEG-2 MP/HL up to 1080P@60fps (ISO-13818)
MPEG-1 MP/HL up to 1080P@60fps (ISO-11172)
RealVideo 8/9/10 up to 1080P@60fps
Multiple language and multiple format sub-title video support
Supports .mkv,.wmv,.mpg, .mpeg, .dat, .avi, .mov, .iso, .mp4, .rm and *.jpg
Supports JPEG thumbnail, scaling, rotation, and transition effects
---|---

Warning:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the  user is encouraged to try to correct the interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different. from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
NOTE: This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter

RF Exposure Statement
To maintain compliance with FCC’s RF exposure guidelines, This equipment should be installed and operated with a minimum distance of 20cm the radiator your body. This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>