Zorloo EZ27ZPA Zophia Wireless Earphone User Guide
- June 6, 2024
- Zorloo
Table of Contents
Zophia Wireless Earphone Quick Start Guide
Important: Please remove the stickers on your earbuds before use.
Open the charging case and take out the earbuds. Remove the stickers at the charging contacts. This is used to prevent charing during shipment. Put the earbuds back into the charging case. Connect the USB-C cable to the charging case for a full recharge before use.
Wireless Earphone Pairing
Only one of the earbuds will flash red & white, this is normal. You only have
to do this pairing once and it will automatically connect to the same
smartphone or computer in your future use.
The left and right earbuds are already paired in the factory If only just one
of the earbuds are able to connect to your mobile or computer, please put them
back into the charging case and take them out to retry again. If this still
doesn’t work, take out earbuds from the charging case, press, and hold both
earbuds for 10 seconds. Once the left and right earbuds are paired, the red
and white LED will flash twice every 3 seconds. This will restore it to
factory default settings.
Wireless Operations and Charging
Wire Connection
Connect the earphone cable 4-pin L/R connectors to the earbuds. Once the 4-pin connector is plugged in, the earbud will automatically turn off Bluetooth operation and switch to wired operation. When the 4-pin connector is unplugged, it will automatically switch back to Bluetooth operation.
Technical Specification (Wireless Earbud)
| Bluetooth SoC Processor | Qualcomm QC3040 Bluetooth TWS SoC |
|---|---|
| Smartphone/Computer Connection. | Bluetooth v5.2 Wireless |
| Audio Codec | SBC, AAC, AptX |
| Headset Capacity | 35mAh |
| Charing Case Capacity | 350mAh |
| Playing Time | 5 Hours, additional 20 hours through charging case |
| USB-DAC Cable Connection | Proprietary 4-pin (compatible 2-pin 0.78mm) |
| Mic Echo Cancellation | Qualcomm CVC |
| Sweat and Water Resistance | IPX4 |
| Weight | 6.2g per earbud |
| Driver Design | 6mm custom Neodynium dynamic driver |
| Chassis Material | Transparent Black Resin |
Technical Specification (USB-DAC Cable)
DAC and Headphone Amplifier| ESS Sabre 9281ACPRO (MQA version) ESS Sabre 9270C
(Standard version)
---|---
USB Audio| 2.0 High Speed Class 2
Smartphone/Computer Connection| USB Type-C
Headphone Connection| Proprietary 4-pin (2-pin 0.78mm compatible)
PCM Max Sampling Frequency| 768kHz (MQA version) / 384kHz (Standard version)
DSD Max Sampling Frequency| 22.5MHz (MQA version) / 5.6MHz (Standard version)
MQA (Master Quality Authenticated)| Renderer, 2nd unfold (MQA version)
Max Bit Depth| 32-bit
Max Output Power| 32mW+ 32mW
SNR| 120dB
THD+N| 0.0006%
Frequency Response (0-40kHz)| +/-0.005dBrA
Operating System| Android, 10S, macOS, and Windows 10/11
Cable Length| 1.3m
Chassis Material| Matte Black Aluminum
Setup Guides
Please download the following setup guides from the Zorloo website using the
QR Code on the right.
Android – eXtream USB Audio Player Pro – Onkyo HF Player
iOS – Apple Music
| macOS | Windows |
|---|---|
| – Check | – Check |
| – Audirvana | – Audirvana |
| -Tidal Desktop | – foobar2000 |
| – Roon | -Tidal Desktop |
You can also find the FAQ at www.zorloo.com/faq
https://www.zorloo.com/download
Limited Warranty & Liability Disclaimer Statement
Zorloo warrants to the end-user customer that Zorloo products are free from
defects in material and workmanship. Warranty coverage extends for twelve (12)
months since the purchase date. Zorloo’s limited warranty covers only those
defects that arise as a result of the normal use of the products and will
repair/replace the products or parts of the product that proves defective. If
the warranty period has expired, paid repair services are available.
Caution: Using the earphones at high volume for an extended time period
may damage your ears. Do not use earphones while operating mobile vehicles
(car, motorcycle, bicycle, etc.). Please keep the product in a safe place away
from children as it may be a choking hazard.
FCC Statement
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions: 1) this device may not cause harmful
interference, and 2) this device must accept any interference received,
including interference that may cause undesired operation. This equipment has
been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
FCC ID: 2A37ZEZ27ZPA
Documents / Resources
|
Zorloo EZ27ZPA Zophia Wireless
Earphone
[pdf] User Guide
EZ27ZPA, 2A37ZEZ27ZPA, EZ27ZPA Zophia Wireless Earphone, Zophia Wireless
Earphone, Wireless Earphone, Wireless Earphone
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>