emerio 30-SSM202185 Soda Maker Instruction Manual

emerio 30-SSM202185 Soda Maker

SAFETY INSTRUCTIONS

Before use make sure to read all of the below instructions in order to avoid injury or damage, and to get the best results from the appliance. Make sure to keep this manual in a safe place. If you give or transfer this appliance to someone else make sure to also include this manual.
In case of damage caused by user failing to follow the instructions in this manual the warranty will be void. The manufacturer/importer accepts no liability for damages caused by failure to follow the manual, a negligent use or use not in accordance with the requirements of this manual.

1. Make sure the Soda Maker machine, the PET bottle and the CO2 gas cylinder are well installed before start. Please note the CO2 gas cylinder is not provided with the machine. Please purchase it from your local stores. CO2 gas cylinder should be 0.6L.
2. Before exchanging an empty cylinder for a full one, please make sure to ask for a CO2 gas cylinder that fits the Soda Maker machine. Do not try to fit a cylinder other than recommended CO2 gas cylinder.
3. Only use the accessories that included or recommended by the manufacturer.
4. Do not repair the machine and accessories by yourself.
5. Never place or store the appliance, PET bottle and CO2 gas cylinder close to the heat source (such as stoves, heaters, etc.) and keep them out of the direct sunlight.
6. Do not place the PET bottle or the CO2 gas cylinder in the freezer!
7. Never transport the appliance with the gas cylinder inside.
8. Fill the bottle with water only, not with other drinks (like beer, wine, juices, soft drinks…). Otherwise, there is a risk that the contents with foam over.
9. Do not mix the water with syrup inside the bottle. Use another container to mix with the sparkled water with syrup if you want to have a delicious soft drink.
10. Never attempt to fill an empty bottle with CO2.
11. The appliance works only with the provide bottle. Please ensure that all extra PET bottles purchased have the same fitting. Use of other brand bottles may be unsafe and will void the term of warranty.
12. The bottle can be damaged by extreme hot or cold (above 40℃ or below 0℃).
13. Every PET bottle has an expiry date – Do NOT use the bottle once expired!
14. If you notice that your bottle has become worn, scratched, color changed, lost its transparency or shape or was damaged, do not use it. Please discard the bottle immediately and replace it with a new one.
15. Caution! The CO2 gas cylinder is pressurized. Avoid children to play with the CO2 gas cylinder.
16. Always place or store the CO2 gas cylinder in a cool place (temperature is not over 40℃).
17. The appliance has been designed to be used with specific cylinders. Please make sure to use a CO2 gas cylinder that fits the appliance. Any or other use will void the warranty.
18. Do not remove the cylinder during the carbonation process.
19. If the gas cylinder losses efficiency, the valve or bottle body is damaged, exchange a new CO2 gas cylinder. Do not change the valve or the bottle body, it may cause enormous danger in this way. It is forbidden to repair by unauthorized person or by yourself.
20. If the cylinder is iced over avoid all physical contact with it. Danger of ice burn.

PARTS DESCRIPTION

1. Rotating head
2. Carbonate button
3. Gas release button
4. Main housing
5. PET bottle
6. Tray
7. CO2 gas cylinder (not included)
8. Spare sealing ring

GET STARTED

(First usage / Replacement of CO2 gas cylinder)

1. Tilt and remove the PET bottle from the appliance.

2. Hold the rotating head of the appliance and slightly rotate it anticlockwise to unlock/open the head.

3. Remove the cup protector (A) from the CO2 gas cylinder head.
   Before installing the CO2 gas cylinder, carefully check the black sealing ring is on the cylinder holder (B).

4. Screw the cylinder on the appliance head tightly with your hands and place it back on to the appliance housing.

5. Rotate the head of the appliance until locks.

Note: If you find the black sealing ring is missing, you can replace it with the accessorial spare sealing ring (8).

1. Put the sealing ring into the cylinder holder.
2. Press the sealing ring into position with your finger or other useful tools.

DAILY USE

Make sure the Soda Maker machine, the PET bottle and the CO2 gas cylinder are well installed before start. Please note the CO2 gas cylinder is not provided with the machine. Please purchase it from your local stores. CO2 gas cylinder should be 0.6L.

1. Always fill the PET bottle with water up to the marked level and screw it into the appliance.

2. Press the carbonate button for 2-3 seconds to carbonate. If you wish, you can press it again to get extra carbonic.

3. Press the gas release button to release the gas pressure. A hissing sound will be heard. Keep pressing until no more hissing sound can be heard; it means the gas pressure has been released completely.
   NOTE: The gas pressure must be released completely, otherwise the PET bottle cannot be loosened!

4. Unscrew the bottle clockwise from the appliance. Now the carbonated water is ready to drink and you can flavor the carbonated water as desired.
   NOTE: Do not add flavor into water before carbonating!
   Very small amount of water may leak out when overfilled or if you press the carbonate button too long. Do not worry, it is normal. Clean up the water in the tray when necessary.

FREQUENTLY ASKED QUESTIONS

• Can I use another brand of CO2 gas cylinder?

  • Yes. The Soda Maker machine is compatible with most of the popular cylinders in the market. Please check with the CO2 gas cylinder suppliers before use.

• Can I use another brand of PET bottle?

  • The bottle is special designed for the machine with quick-connect design that attaches easily and securely every time; other brands may not suit. Please ensure that all extra PET bottles purchased have the same fitting.

• What should I do if the Soda Maker machine does not carbonate?

  • Make sure the appliance is always in the upright position.
  • Check the CO2 gas cylinder, exchange it if empty.

• What should I do if the Soda Maker machine continues to release gas after the carbonate button has been released?

  • Do not remove the CO2 gas cylinder or the PET bottle. Leave the appliance in the upright position and do not touch the appliance until no more gas is heard escaping.
  • When no more gas is being released, push the gas release button and unscrew the PET bottle. Unscrew the CO2 gas cylinder and exchange it with a new one.
    CAUTION: the CO2 gas cylinder may be very cold!

• What to do if the gas leaks after you have screwed the CO2 gas cylinder into the appliance?

  • Please screw out the CO2 gas cylinder only when it is still warm. Replace the black sealing ring in the CO2 gas cylinder holder.
  • CAUTION : the CO2 gas cylinder may be very cold!

• What should I do if the water overflows from the PET bottle while carbonating?

  • Have you overfilled the PET bottle? Check the water-fill line.
  • Are you pressing the carbonate button too long? Press 2-3 seconds each time only.
  • Very small amount of water may leak out when overfilled or if you press the carbonate button too long. Do not worry, it is normal. Clean up the water in the tray when necessary.

CLEANING

For the Soda Maker machine: to clean the appliance, wipe it with a soft damp cloth. Do not wash it in the dishwasher. Do not use any solvents or abrasive/aggressive cleaners, this could damage the surfaces of the appliance.
For the PET bottle: do not wash the bottle or its cap in the dishwasher. Clean the bottle and cap frequently with water (max. 40℃)

GUARANTEE AND CUSTOMER SERVICE

Before delivery our devices are subjected to rigorous quality control. If, despite all care, damage has occurred during production or transportation, please return the device to your dealer. In addition to statutory legal rights, the purchaser has an option to claim under the terms of the following guarantee:
For the purchased device we provide 2 years guarantee, commencing from the day of sale. If you have a defective product, you can directly go back to the point of purchase.
Defects which arise due to improper handling of the device and malfunctions due to interventions and repairs by third parties or the fitting of non- original parts are not covered by this guarantee. Always keep your receipt, without the receipt you can’t claim any form of warranty. Damage caused by not following the instruction manual, will lead to a void of warranty, if this results in consequential damages then we will not be liable. Neither can we hold responsible for material damage or personal injury caused by improper use or if the instruction manual is not properly executed. Damage to accessories does not mean free replacement of the whole appliance. In such case please contact our service department. Broken glass or breakage of plastic parts is always subject to a charge. Defects to consumables or parts subjected to wearing, as well as cleaning, maintenance or the replacement of said parts are not covered by the warranty and are to be paid.

ENVIRONMENT-FRIENDLY DISPOSAL

Recycling – European Directive 2012/19/EU
This marking indicates that this product should not be disposed with other household wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.
FUN NORDIC ApS
Egelund 8
6200 Aabenraa
Denmark
www.funnordic.dk 

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>