COMFORT WORKSPACE 2AZENUPPER Guangdong Upper Upper User Manual

User Manual

COMFORT OFFICE FURNITURE CO.,
LTD GUANGDONG ADDNo.
3 Lujing Industry Zone, Nansha Street, Nansha District,
Guangzhou, Guangdong, China
TEL.: 86-20-84982147 FAX: 86-20-34680856/86-20-84983656
WEB:WWW.COMFORTWORKSPACE.COM

IMPORTANT SAFETY INSTRUCTIONS AVII■1P

When using electrical furnishing, basic precautions should always be followed, including the following: Read all instructions before using (this furnishing). DANGER – To reduce the risk of electric shock: Always unplug this furnishing from the electrical outlet before cleaning or servicing. WARNING -To reduce the risk of burns, fire, electric shock, or injury to persons:

1.  Unplug from outlet before putting on or taking off parts.
2. Close supervision is necessary when this furnishing is used by, or near children, invalids, or disabled persons.
3. Use this furnishing only for its intended use as described in these instructions. Do not use attachments not recommended by the manufacturer.
4. Never operate this furnishing if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the furnishing to a service center for examination and repair.
5. Keep the cord away from heated surfaces.
6. Never operate the furnishing with the air openings blocked. Keep the air openings free of lint, hair, and the like.
7. Never drop or insert any object into any opening. 8. Do not use outdoors.
8. Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
9. To disconnect, turn all controls to the off position, then remove the plug from the outlet.
10. ‘WARNING: Risk of Injury – Keep children away from extended lifting standing table and lifting monitor arm.’
11. WARNING: Risk of Electric Shock – Connect this furnishing to a properly grounded outlet only. See Grounding Instructions. -I’
12. For loading always put heavier items at the bottom and not near the top in order to help prevent the possibility of the furnishing tipping over.
13. Warning: Risk of Injury to Persons- do not place video equipment such as televisions or computer monitors on a lifting standing table.
14. CAUTION: Risk of Electric Shock-this unit has two power supply cords. Unplug both cords before moving or servicing this furnishing.
15. WARNING: Risk of Electric Shock, Fire, and Injury – review the assembly instructions to confirm that the appropriate critical components and accessories are being used with the furnishing.’
16. WARNING: RISK OF INJURY- not to be used in locations where children or people with cognitive disabilities are anticipated to be present. If present, closely supervised.

SAVE THE INSTRUCTIONS

PARTS LIST

ASSEMBLY INSTRUCTIONS

|

|
---|---|---

| |

UPPER SYSTEM CONTROL INSTRUCTION

1. Lifting button, when pressed long time, the listing desktop hoard is going tic. When the monitor lifting arm arid the acrylic screen seri Se the rise of the table, they follow Lo the highest position..
2. V Going down button when pressed a long time. the lifting desktop board is going down. When the monitor lifting arm and the acrylic screen sense that the liffng table drops to the bottom, trey follow to the lowest position
3. When the screen filling button is pressed, the screen continues to rise to the high heat point: wl•er pressed the going clown button. the screen continues to decrease to the lowest point: whe• the screen is raised to the proper height, press the up or down button to stop lifting.
4. ‘1.2 .3’ are for positions heights. Combine with the ‘M’ Button to set memory positions according to users’ height and match different height users.
5. ‘M’ setting memory heights button. When using the desktop board to adjust to the proper height, press and hold the M button. the blue light will contirJeto flash. then press the memory position that needs to set the corresponding number to finish the setting, and the blue light goes out.
6. When the lilting tab e board is caught in the falling process or the human body enters the Emil pinch sensing urea (red marking areas), the red warning light. continues to flash. the desktop board will stop falling. and then slowly rebound. “nd-dating that there is foreign matter involved, requiring the user to check: that the device is used correctly.
7. When an abnormality occurs during the use of the device, press the LI and down. V buttons at tl-e same: time, the red warning light is always on. When the ‘drop’ sound s heard, .9e desktop board is lowered to the Lhc baton,. indicating that the rose iscornploted and the warning light is off.
8. When lifting a desktop board is used: the tie ‘weight of the desktop board is 1 V.G. When the desktop hoard exceeds the set weight value, the device may he abnormal y used. 9.
9. Users can down oad the ‘Comfort Smart’ APP to remotely assist and collect and analyze the data 4): The rose: setting can be used wl••r the lifting device is not humanized during :9e lifting process, causing the device to stop operating, that is. the device is abnormal. :2.: Any control buttons on tie control panel will light up MI hue lights. When: the operation is completed, the blue light will automatically go out after 10 seconds.

UPPER MONITOR ARM OPERATION INSTRUCTION ap,2>

Monitor Lifting Support Bar can be lifted up or down with a distance of 220mm.

Front Arm Support Bar can be moved by clockwise 90°.
When Upper Arm in the original position, the Front Arm Support Bar can be pressed down 6)(60′. 1 I The d ‘stance of highest point and lowest one is 330mm

ATTENTIONS

**** From Arm Support Era r(cIrcl ed by red line) can load 2.5-9KG. During process of lifting up, the load weight exceed maximum load, the lifting function will out of action and arm support bar will stop freely. Do not disassemble and inspect at will.

• After assemble the monitor, if it can not stop in any heights when adjusting monitor, reduce load weight of front arm support bar by adjusting “-” , adjusting 14-” to increase load weight. It can make balance of monitor weight and load weight of front arm support bar to achieve stopping freely. ( Please use *4 hexagonal wrench if adjusting arm support bar.)
• TidyCables

Upper Lift Screen (marked by red frame), do not load or heavy load.
For Upper lining table (marked by the red frame), the static load capacity is 35KG, and the load capacity is <10KG when using,

• When using Upper lifting table, it is recommended to use the lifting and lowering for 5 minutes. then stop the lifting operation for 5 minutes before use to protect the normal Operation or the molar; and when the load exceeds its ultimate load, the motor will automatically turn off the power protection function.

UPPER Control System Connection Diagram

GROUNDING INSTRUCTIONS

For a grounded, cord-connected product rated max 15 amperes and intended for use on a nominal 120-volt supply circuit: This product is for use on a nominal 120-volt circuit and has a grounding plug that looks like the plug illustrated in sketch A. Make sure that the product is connected to an outlet having the same configuration as the plug. No adapter should be used with this product.

User maintenance instructions

1. Caution : When cleaning or maintenance the table, unplug the table from the receptacle.
2. The table has no user serviceable parts, please do not maintenace any electrical part. When the table can not normal operated, returned the appliance to an authorized service facility for examination and /or repair.”
3. Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under furniture or appliances.
4. When the table is not in use, remove the supply cord from the table. Storage the cord and total table in a dry location and a location where children can not touched. 1

COMFORT SMARTA APP USER GUID
1 APP SETTING
APP DOWNLOAD
  LOGIN
2 USE & ADJUSTMENT
CRFATF PROFII F
CONNECT
3 UBIQUITOUS HEALTHCARE •

| FUNCTIONS OF THE HOME PAGE
---|---
STANDING WORKING WARNING
WORKING MODES EVALUATION
WORKING MODES STATISTICS
SETTING FOR UPPER TABLE

4 FACILITIES MAINTENANCE
**** SOFTWARE SETTING
 FAQ

1APP SETTING
DOWNLOAD
OSearch ‘Comfort Smarrancl download Imrn Apple store or Android alelorm

**** In order  to reacive APP smartfunction please et your manul phone aulhorlly marages
APPI F: Sot: ng Nnlit:o Comfort Smart Allow notice
ANDROID: Sellino—Appir.alinr, Management—Comfort Sinalt—Notice—T•n on lock screen display

 CREATE ACCOUNT

Click “Create Account” lo register account by mailbox to get verification code and set password.

LOG IN VIA THIRD-PARTY

‘Comfort Smart’ APP can log in via wechat, facebook or I inkedin. Confirm au- thority of the third-party to complete quick login, then lurn lo “My Profile” directly.

USER &ADJUSTMENT
CREATE PROFILE
After logging in, you will access to ‘CREATE PRO-FILE to enter your personal information as per re-quest in order to get scientific & proper sugguestion through smart healthy monitoring warning.   CONNECT
1ST CONNECT
1. APP Connecting with UPPER: P ‘ass and hck the “Ccnnece Bu:ton sneer te cash tor f sec-mu’  ting fine ara ccnnect the WP hptc)nts sert by UP’ER. The: de:- 1W. • 411111: Ws; ri2tipiot .13DGFAC I tt.11ik Or tic rasrbyrnd is ‘1231507S”.

2. UPPER network configuration: After selecting ‘,PPE R”, it I elm, the “Near y hie-Avo-kecl a.:vice” interfc.a.x.. (sine:: the desk is no: connected, there is no -:Iftc11.:*1 I S. WI PI s iri :thowr, i i PicAL rt+ 7). c kit Desk” Dr) the top right .71 tie °atm. select the availab e wirele in ticWIFIlistthatappears. Net a r d enter the F password kr ietwork Ink r a. After tie inking is suwAssful, tho reminder cif bsit ::(4) 1.p and nth irn IU We I antriftpaw 0’ “Ccmtort SM3r.”.

1ST USE
ware 1st the  you go nt to ” \learty Nethvkad Cet(cest. 0- yet. can .7,3nr.9.:t Uj ni:nnr ng it QI tulcr • V.y Deicing rim :11:0 wor yftil vennt to connect.

C3HEAL THCARE
Functions of Home Page

1.  Device Connecting Status
2. Highly real-time monitoring ‘tam. •t.A ipar r n.) hit Ir.
3. Memory Height Positions st II n4 to VI Are I:1..11:n 11Mr.:0.
4. Functions Setting Reminder ;.:, to r.r.t-cm.y.ntr. Ir:n no tiro,L rinlieDe

HEALTHCARE
Standing Work Warning

Turn on the ‘Standing Worklllarning’. funct ion. and the ‘Duration time of Sitting Cycle’ ceding will tong up. After the sedentary reaches the set time:Comfort Smart’ will rc Mind 1.1117 YSI:t to thoosr: the standing wink pnttire.

HEALTHCARE
Work Mode Statistics The App’: hn c <stage recerda the (^Ally r. rdrig lire 1:— norts, which can ne checked in the ‘work mote. ;tat stick’.
Working Mode Evaluation
APP w II 010 yzc your data of your data of Work Mode: ow s rd c.,..011.1e:ttki•I 1Iva-:;actits Ic yc:t.r Inane.
uu tidings to activate windows.

GMAINTENANCE
APP SETTINGS

Ent:Jr tit: APB SC7tin•s interface throulithc tornfor Smart” APP hoticpage

1. my Profile: Review & revise persional information ?
2. Change e-mail address: Change “Comfort SmarrAPP Account
3. Languagel Chinese,English,Japanese, Spanish. Korean .
4. :Vinger: Turn cm the Rirger and Vibration to get the sitt rig posture status in time, never miss any healthy remidners
5. Change password: Change password for logging n

Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radiorIT technician for help.
FCC & IC Radiation Exposure Statement:
This equipment complies with FCC and Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>