QUEST USA CORP S-66+ Touch Sound Lamp User Manual
- June 17, 2024
- QUEST USA CORP
Table of Contents
QUEST USA CORP S-66+ Touch Sound Lamp
Operating Image
Technical parameters
- Output power: 3W
- Built-in lithium battery voltage: 3.7V
- Standard specification: V2.1+EDR
- Bluetooth frequency: 2.4GHz-2.48GHz
- Transmission distance: 10 meters
- Frequency response range: 90Hz-20KHz
- Signal-to-noise ratio of the whole machine: ≥80db
- Product size: 95mm*128 mm
- Charging input: DC5V/ 500mA
- Bluetooth protocol: A2DP1.2
After fully charged, the normal volume (70%) can be played for about 6 hours, and the lamp can be used for about 6 hours at the highest brightness
Boot
Turn the switch to the right and turn it on, it will enter the Bluetooth mode and light mode by default.
key Operation
-
Model mode key, long press to switch between Chinese and English languages, short press to switch to Bluetooth mode, FM mode, music mode, clock mode, natural sound sleep mode (in natural sound mode, press +- to switch ringtones)
-
Bluetooth wireless music mode
Tap for the previous song, long press for the volume to continue to decrease.
Tap for the next song, long press for continuous volume increase.
Click to play or pause when playing music; click when calling: long press for 30/60/90 minutes -
TF card music playback mode
After inserting the TF card, it will automatically enter the TF card music playback mode
Tap for the previous song, long press for the volume to continue to decrease.
Tap for the next song, long press for continuous volume increase.
Tap to play or pause while music is playing.
Press the “MODE” key in TF card music playback mode to switch to Bluetooth mode. -
AUX audio input mode
Insert 3.5mm audio cable, connect mobile phone, computer, tablet computer, MP3, etc., can be used as an external audio. In AUX mode, you can press the volume plus or volume down “ ” key to adjust the volume, other keys are invalid.
In any mode, as long as the 3.5mm audio cable is inserted, the system will automatically recognize and switch to the AUX audio input mode.
Using the Bluetooth Function
- This speaker supports the use of bluetooth devices with A2DP kinetic energy. First turn it on, enter the bluetooth mode, and the bluetooth indicator will turn on. The blue light is flashing and accompanied by a voice prompt. At this time, the speaker is in a state of waiting for pairing and connection. It can be paired with Bluetooth speakers.
- The first step of mobile phone connection is to turn on the Bluetooth setting switch of the mobile phone in the mobile phone settings, and click to search for devices. The second step, When the available device displays the S66+ character, it means that the phone has found the Bluetooth speaker, click S66+ to enter the pairing mode, hand After the phone and the speaker are successfully paired, there will be a voice prompt and display connected.
Light Use
When the device is turned on, it defaults to the low warm light effect, and
you can adjust the light by touching the center point of the Lanet. warm
light/colored light/breathing light/rhythm. Touch the center point of the
speaker net, the first gear is slightly bright, the second gear is bright, and
the third gear is the brightest. Press and hold for two seconds to enter the
color change mode, Then touch the dot center of the speaker net to change the
light. The colors change in sequence: red, green, dark blue, yellow, light
blue, purple, breathing light. Rhythm (flashes with the rhythm of the music
while playing)
White Noise
Short press the M button to switch to white noise mode, with the sound of ding dong, running water is the default, short press +- to select the white noise track: 1 HaiWaves 2 Whisper 3 Piano Music 4 Birds 5 Rain 6 Cranes 7 Quiet Night 8 Running Water
FM Radio Use
Short press the M button to switch to the FM function, and connect the charging cable to the MICRo interface of the product to act as a radio antenna, and the other end does not need to be To connect to any device, enter the radio station auto search and save automatically by short pressing the pause button. Use to make a saved station selection.
Clock Setting
Short press the time key to enter the clock/minute setting, Press to adjust hours/ minutes Alarm setting / light wake up.
Alarm setting / light wake up.
Short press the alarm button to enter the clock/minute setting, Press to adjust the hour/minute and set the time Then short-circuit the alarm button and press to select the alarm you like, and finally press and hold the alarm button to turn it on. Alarm clock (the alarm clock icon will appear on the screen after the setting is successful). The light will slowly brighten 15 minutes before the alarm goes off, Press the top speaker net to turn off the alarm. When no one turns off the alarm, the alarm will automatically turn off after ringing for 3 minutes (off The alarm clock will also sound normally in the phone state, please cancel the alarm clock when you do not need the alarm clock) Cancel the alarm clock setting: long press the alarm clock Bell button (the alarm icon on the screen disappears after the cancellation is successful)
Sleep Mode
Long press the pause button to set 30/60/90 minutes/off. After the time is set, the lights and music will be turned off at the same time.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>