Iot4you Sac 203N Smart Switch User Manual
- June 6, 2024
- Iot4you Sac
Table of Contents
Sac 203N Smart Switch
User Manual
This product is based on an intelligent lighting controller, intelligent
dimming controller, curtain controller, scene controller, smart socket, and
other intelligent products developed on Tuya intelligent platform.
It can realize local touch control, APP remote control, and intelligent voice
control.
This manual applies to multiple intelligent products category of WiFi\ZigBee\Bluetooth Mesh three communication modes. As follows:
Intelligent Lighting Controller
Intelligent Dimming Controller
Intelligent Curtain Controller
Intelligent Scenario Controller
Intelligent Socket Controller
Product General Parameters
Input Voltage: AC 100 ~ 240V 50-60Hz
Power Supply Mode: Live Wire + Neutral Wire
Control Mode: APP remote control, Local touch control, AI speaker control
Support System: Android & IOS
Standby Power Consumption: =0.5W
Housing Material: PC flame retardant material
Panel Material: Tempered glass
WiFi Wireless Standard: Support 802.11 b/g/n
Installation Instructions
- Check the product category you purchased, and wire it according to the corresponding graphic method below;
- Ask a professional electrician to install and prohibit live operation;
- Please choose the bottom box of 50-60 mm depth for easy installation of the smart switch.
Lighting Panel Wiring Diagram
Note:
Light switch supports 1-4 gangs Please indicate the connection according to
the physical terminal! Please correctly distinguish the Neutral wire and the
Live wire!
Input: AC100～240V
Output：≤600W/gang
CAUTION: strictly installed by a licensed electrician
L: Live wire
N: Neutral wire
L1:Connect 1 control wire
L2:Connect 2 control wire
L3:Connect 2 control wire
L4:Connect 4 control wire
Curtain Panel Wiring Diagram
Note:
Please indicate the connection according to the physical terminal! Please
connect the motor forward and reverse the connection correctly.
Please connect the forward and reverse lines of the motor correctly.
Input: AC100～240V
Output: ≤600W/gang
Load: AC motor
CAUTION: strictly installed by a licensed electrician
L: Live wire
N: Neutral wire
M11:Motor forward wire
M12:Motor reversal wire
Scene Panel Wiring Diagram
Note:
Please indicate the connection according to the physical terminal! Please
correctly distinguish the Neutral wire and the Live wire!
Input: AC100～240V
Output: Unloadable load
CAUTION: strictly installed by a licensed electrician
L: Live wire N: Neutral wire
The scene switch only needs to connect the “L” and the “N”. Scene switch does not support voice control
Single wire switch
Note: Please indicate the connection according to the physical terminal!
Input:AC100～240V
Output: ≤5-300W/gang
CAUTION: strictly installed by a licensed electrician
L: Live wire
L1:Connect 1 control wire
L2:Connect 2 control wire
L3:Connect 2 control wire
Single fire switch use note:
- Please use branded lamps larger than 5W.
- If there is a flicker of another phenomenon during use, please contact the merchant to communicate.
- After the single fire switch is connected to the network, the network light is off.
Socket Panel Wiring Diagram
Smart wall socket
Input: AC100～240V
Output: Use by the product label
CAUTION: strictly installed by a licensed electrician
L: Live wire
N: Neutral wire
G: Ground wire
Smart wall socket use note:
- Wall sockets include, with USB socket, 16A dedicated socket, etc., please strictly follow the product label.
- The network light of the wall outlet is blue; the switch status light is red.
APP download and the device connects with network instructions
-
Download and install the “Tuya Smart” or “Smart Life” APP.
http://app.appurl.me/79813556854
https://itunes.apple.com/cn/app -
Sign in APP or sign up APP’s account: Go to the APP page and follow the prompts to register with your mobile phone number and log in to the app.
-
Add device to the network (APP operation)
a: Press and hold any button of the smart switch for 6-8 seconds, wait for the
signal indicator to start flashing quickly, open the APP. Make the following
settings; As Figure 1 to Figure 3 show.
b: Click the “+” symbol in the upper right corner of the APP, select the
device type you want to add and enter the Add Device interface;
c: Then follow the steps of Figure 1 – Figure 3 and the APP prompt to operate,
until the addition is successful.
Network Addition Instructions
The following smart speakers are supported (continuous update):
Binding Alexa
Bind the Smart life account to “Alexa”
-
Click on “SKills” in the menu and search for “Smart Life”. Select “Smart Life” in the search results and click “ENABLE” to enable the skill.
-
After clicking the bind account, on the new page, Enter your Smart Life application account and password, choose the country of your account correctly, then click “Log in now” to bind your “Smart Life” account. account After the binding is successful, click “OK” to return the Main interface.
Control your smart device with Alexa
Before controlling the device, Alexa needs to discover the device first. Click on “DISCOVER” on the Smart Home page to discover the device. The discovered devices will be displayed in the list.
Control Your Smart Device with Voice
- Our smart devices are connected to more than 8 mainstream smart speaker voice controls;
- You can view the supported third-party control categories through the APP-Device Details page;
- Download, install and register the smart speaker APP;
- Bind your Tuya account after logging in to the smart speaker app;
- You can use voice to control your smart devices after setting up your smart devices in the smart speaker app.
Such as:
Alexa Turn on the light of the room. (Switching device)
Alexa, I am going home. (Customized scenario)
Alexa, Open the curtains. (Control curtain switch)
For detailed steps on setting up a smart device in the smart speaker APP, please refer to the introduction in “Tuya Smart” APP;
- Click on the device in the TuyaSmart APP- the device control interface appears;
- Click on the upper right corner of the device control interface the “Device Details” interface appears;
- You can see the supported third-party control details in the “Device Details” interface;
- Click on the smart speaker brand icon you need to know to see the detailed use of this speaker.
Package content
Product 1
User manual 1
Screw 2
Type 86 package size: 10010040mm
Type 120 package size: 14093*43mm
Precautions
- The signal indicator of the device is off before it connects with the network. After connecting with the network, it is blue and bright;
- The status indicator of the device’s switch is blue when turned on and white when turned off;
- The device has a slight fever during use, which is a normal phenomenon;
- Please do not disassemble the equipment privately;
- Please contact a professional electrician to install before installation.
It is forbidden to operate with electricity!
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1)This device may not cause harmful interference.
(2)This device must accept any interference received, including interference
that may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.if this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>