glas 1000-021 16 Panel Folder User Manual
- June 6, 2024
- glas
Table of Contents
USER MANUAL
CAUTION
IMPORTANT SAFEGUARDS. SAVE THESE INSTRUCTIONS.
CHARGING:
-
The Glas G2 device has an input rating of 5Vdc (USB Type A) 0.8A. Battery capacity is 350mAH at nominal voltage 4.2Vdc.
-
This product is intended to be charged only using the included USB 2.0 charging cable (Type A to Micro B) with the following types of equipment:
– Listed / certified USB charger (marked “LPS” or “Class 2”), with a rated output of 5Vdc, 0.5A min (2.5A max).
– Listed / certified host computer using (5Vdc) USB 2.0 or better. -
The included USB 2.0 charging cable is for INDOOR USE ONLY.
-
Do not attempt to disassemble your device. Any attempt to do so will void the warranty. If your device needs service, please contact our customer service team at glas.com/support.
BATTERY WARNING
- The battery used in this device may present a risk of fire, explosion or chemical burn if mishandled. Do not disassemble or heat this device above 40°C (104°F).
- Stop using this product if it becomes abnormally hot, or if abnormal conditions are detected during charging, use or storage.
BATTERY DISPOSAL
The Glas G2 device contains a lithium-ion battery, which contains elements that may pose health risks to individuals if disposed of incorrectly.
DO NOT dispose of this product in a fire or incinerator, as that might cause the battery to catch fire and explode.
Lithium-ion batteries can be recycled, but only at permitted treatment facilities such as household e-waste collection points or battery-recycling drop-off locations. Please contact your local authority for more information as to how to recycle this product properly.
SAFETY WARNING
- This Glas G2 device is only to be used with Glas G2 pods. Do not insert any foreign objects or materials into this device.
- Non-smokers, pregnant women, women who may become pregnant, women who are breastfeeding, persons with or at risk of heart disease, high blood pressure, or diabetes, or persons taking medication for depression or asthma should not use this product. You should consult your physician before using any Glas products.
- This product is not to be used by children. Keep this product out of reach of children and pets at all times.
- Do not disassemble, drop, throw, crush, deform, puncture, shred, microwave or incinerate this product.
- Keep this product dry.
- Stop using and dispose of this product immediately if the device enclosure shows any signs of damage, such as swelling or cracks.
- Some parts of the Glas G2 product may be a choking hazard. If ingested, consult a poison control center or doctor immediately. In the case of ingestion by a pet, consult a veterinarian immediately.
- Store the Glas G2 product at room temperature. Do not store or use this product in hot areas such as where the product is continuously exposed to direct sunlight, in a closed vehicle in hot weather, or near a heat source.
UNLOCK DEVICE
As part of Glas’s youth prevention efforts, all new devices are locked and cannot be used until your age is confirmed. Please follow these steps to unlock and activate your device.
1.
Download and open the Glas mobile application on your smart phone.
2.
Login or create an account.
3.
Follow the in-app instructions to unlock & activate your device.
CONNECT APP
App features include:
Glas-Smart™
(Customize Your Experience)
Enhanced Security
(Lock/Unlock, Signal/Locate Device)
Monitor Usage
(Track & Map Usage)
Battery Monitor
(Track Battery Life)
Tutorials & FAQ’s
(Device Troubleshooting)
Customer Support
(Glas Concierge Service)
Easy To Use
(Streamlined App)
GETTING STARTED
1.
Remove the colored cap from the pod.
2.
Align the air sensor on the device with the small hole on the bottom of the
Glas G2 Pod, and insert the Pod into the device.
3.
Take small puffs from the Glas G2 device to get a feel for the vapor
production & ease into inhaling. If it feels too harsh, try to inhale less and
puff more gently.
BATTERY INDICATOR
While in use the light glows to indicate battery life.
100-20% Charge
20-5% Charge
5-0% Charge
You can also check the battery status of your device in the Glas mobile app.
CHARGING
Insert the Type A part of the included USB 2.0 (Type A to Micro B) cable into a compatible USB port, and insert the Micro B part into the charging port located at the bottom of the Glas G2 device. Only charge the Glas G2 device within the temperature range of 0-40°C (32-104°F). Device is fully charged in approximately 20 minutes.
While charging, the LED indicator glows to indicate the charging status.
100% Charged
Charging
Keep the following areas clean and dry to ensure optimal performance of your Glas G2 product:
- G2 Pod
- Inside the G2 device (Where the G2 pod is inserted)
- Charging port (At the bottom of the G2 device)
Use a cotton swab dampened with isopropyl alcohol to clean. Let air dry thoroughly.
AT YOUR SERVICE
Need help? Please feel free to contact our concierge support team at any time via the mobile app or glas.com website.
Email:
support@glas.com
Support:
glas.com/support
Website:
glas.com
Visit our website to see and try our currently available pod flavors.
We are here to help!
FCC NOTICE
FCC Supplier’s Declaration of Conformity
Product Name: Glas-B
Model Number: M926-B, Glas G2
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Responsible Party - U.S. Contact Information:
Company name: Glas, Inc.
Address: 2127 Westwood Blvd., Los Angeles, CA 90025 Telephone Number:
844-949-4527
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
ISED STATEMENT
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
SOFT
TOUCH COAT
PART NUMBER: 1000-021
| REVISION | B |
|---|---|
| Date | 6/17/21 |
Documents / Resources
| glas
1000-021 16 Panel
Folder
[pdf] User Manual
GLASG2, 2AZ44-GLASG2, 2AZ44GLASG2, 1000-021 16 Panel Folder, 1000-021, 16
Panel Folder
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>